From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 7/15] ide: drop "PIO data" argument from ide_get_best_pio_mode()
Date: Sat, 30 Jun 2007 21:05:20 +0200 [thread overview]
Message-ID: <200706302105.20596.bzolnier@gmail.com> (raw)
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode()
and convert all users accordingly.
* Remove no longer needed ide_pio_data_t.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-lib.c | 6 +-----
drivers/ide/legacy/ali14xx.c | 2 +-
drivers/ide/legacy/dtc2278.c | 2 +-
drivers/ide/legacy/ht6560b.c | 2 +-
drivers/ide/legacy/qd65xx.c | 2 +-
drivers/ide/legacy/umc8672.c | 2 +-
drivers/ide/mips/au1xxx-ide.c | 2 +-
drivers/ide/pci/aec62xx.c | 2 +-
drivers/ide/pci/alim15x3.c | 3 +--
drivers/ide/pci/atiixp.c | 2 +-
drivers/ide/pci/cmd640.c | 2 +-
drivers/ide/pci/cmd64x.c | 2 +-
drivers/ide/pci/cs5520.c | 2 +-
drivers/ide/pci/cs5530.c | 2 +-
drivers/ide/pci/cs5535.c | 6 +++---
drivers/ide/pci/cy82c693.c | 2 +-
drivers/ide/pci/hpt34x.c | 2 +-
drivers/ide/pci/hpt366.c | 2 +-
drivers/ide/pci/it8213.c | 4 ++--
drivers/ide/pci/it821x.c | 4 ++--
drivers/ide/pci/jmicron.c | 2 +-
drivers/ide/pci/opti621.c | 4 ++--
drivers/ide/pci/pdc202xx_new.c | 2 +-
drivers/ide/pci/pdc202xx_old.c | 2 +-
drivers/ide/pci/piix.c | 2 +-
drivers/ide/pci/sc1200.c | 2 +-
drivers/ide/pci/scc_pata.c | 2 +-
drivers/ide/pci/serverworks.c | 2 +-
drivers/ide/pci/siimage.c | 4 ++--
drivers/ide/pci/sis5513.c | 2 +-
drivers/ide/pci/sl82c105.c | 2 +-
drivers/ide/pci/slc90e66.c | 2 +-
drivers/ide/pci/tc86c001.c | 2 +-
drivers/ide/pci/triflex.c | 2 +-
drivers/ide/ppc/mpc8xx.c | 3 +--
drivers/ide/ppc/pmac.c | 2 +-
include/linux/ide.h | 6 +-----
37 files changed, 43 insertions(+), 53 deletions(-)
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -277,7 +277,6 @@ EXPORT_SYMBOL_GPL(ata_pio_cycle_time);
* @drive: drive to consider
* @mode_wanted: preferred mode
* @max_mode: highest allowed mode
- * @d: PIO data
*
* This routine returns the recommended PIO settings for a given drive,
* based on the drive->id information and the ide_pio_blacklist[].
@@ -286,7 +285,7 @@ EXPORT_SYMBOL_GPL(ata_pio_cycle_time);
* This is used by most chipset support modules when "auto-tuning".
*/
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
+u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
int pio_mode;
struct hd_driveid* id = drive->id;
@@ -335,9 +334,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
if (pio_mode > max_mode)
pio_mode = max_mode;
- if (d)
- d->pio_mode = pio_mode;
-
return pio_mode;
}
Index: b/drivers/ide/legacy/ali14xx.c
===================================================================
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -117,7 +117,7 @@ static void ali14xx_tune_drive (ide_driv
unsigned long flags;
int bus_speed = system_bus_clock();
- pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
/* calculate timing, according to PIO mode */
time1 = ata_pio_cycle_time(drive, pio);
Index: b/drivers/ide/legacy/dtc2278.c
===================================================================
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -71,7 +71,7 @@ static void tune_dtc2278 (ide_drive_t *d
{
unsigned long flags;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
Index: b/drivers/ide/legacy/ht6560b.c
===================================================================
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -208,7 +208,7 @@ static u8 ht_pio2timings(ide_drive_t *dr
if (pio) {
unsigned int cycle_time;
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
cycle_time = ata_pio_cycle_time(drive, pio);
/*
Index: b/drivers/ide/legacy/qd65xx.c
===================================================================
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -258,7 +258,7 @@ static void qd6580_tune_drive (ide_drive
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ata_pio_cycle_time(drive, pio);
switch (pio) {
Index: b/drivers/ide/legacy/umc8672.c
===================================================================
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -110,7 +110,7 @@ static void tune_umc (ide_drive_t *drive
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -106,7 +106,7 @@ static void auide_tune_drive(ide_drive_t
u8 speed;
/* get the best pio mode for the drive */
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
drive->name, pio);
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -142,7 +142,7 @@ static int aec6260_tune_chipset (ide_dri
static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
Index: b/drivers/ide/pci/alim15x3.c
===================================================================
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -295,7 +295,6 @@ static int ali_get_info (char *buffer, c
static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
int s_time, a_time, c_time;
@@ -307,7 +306,7 @@ static u8 ali15x3_tune_pio (ide_drive_t
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
- pio = ide_get_best_pio_mode(drive, pio, 5, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -155,7 +155,7 @@ static void atiixp_tune_pio(ide_drive_t
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -661,7 +661,7 @@ static void cmd640_tune_drive (ide_drive
return;
}
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ata_pio_cycle_time(drive, mode_wanted);
cmd640_set_mode(index, mode_wanted, cycle_time);
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -228,7 +228,7 @@ static u8 cmd64x_tune_pio (ide_drive_t *
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ata_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
Index: b/drivers/ide/pci/cs5520.c
===================================================================
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -126,7 +126,7 @@ static int cs5520_tune_chipset(ide_drive
static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
}
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -82,7 +82,7 @@ static void cs5530_tunepio(ide_drive_t *
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
Index: b/drivers/ide/pci/cs5535.c
===================================================================
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -89,7 +89,7 @@ static void cs5535_set_speed(ide_drive_t
pioa = speed - XFER_PIO_0;
piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
- 255, 4, NULL);
+ 255, 4);
cmd = pioa < piob ? pioa : piob;
/* Write the speed of the current drive */
@@ -159,7 +159,7 @@ static void cs5535_tuneproc(ide_drive_t
/* cs5535 max pio is pio 4, best_pio will check the blacklist.
i think we don't need to rate_filter the incoming xferspeed
since we know we're only going to choose pio */
- xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
+ xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4);
ide_config_drive_speed(drive, modes[xferspeed]);
cs5535_set_speed(drive, xferspeed);
}
@@ -174,7 +174,7 @@ static int cs5535_dma_check(ide_drive_t
return 0;
if (ide_use_fast_pio(drive)) {
- speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ speed = ide_get_best_pio_mode(drive, 255, 4);
cs5535_set_drive(drive, speed);
}
Index: b/drivers/ide/pci/cy82c693.c
===================================================================
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -330,7 +330,7 @@ static void cy82c693_tune_drive (ide_dri
#endif /* CY82C693_DEBUG_LOGS */
/* first let's calc the pio modes */
- pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
Index: b/drivers/ide/pci/hpt34x.c
===================================================================
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -80,7 +80,7 @@ static int hpt34x_tune_chipset (ide_driv
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -652,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/it8213.c
===================================================================
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -82,7 +82,7 @@ static void it8213_tuneproc (ide_drive_t
{ 2, 1 },
{ 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
@@ -214,7 +214,7 @@ static int it8213_config_drive_for_dma (
if (ide_tune_dma(drive))
return 0;
- pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, 255, 4);
it8213_tune_chipset(drive, XFER_PIO_0 + pio);
return -1;
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -255,7 +255,7 @@ static int it821x_tunepio(ide_drive_t *d
* on the cable.
*/
if (pair) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
/* trim PIO to the slowest of the master/slave */
if (pair_pio < set_pio)
set_pio = pair_pio;
@@ -276,7 +276,7 @@ static int it821x_tunepio(ide_drive_t *d
static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
Index: b/drivers/ide/pci/jmicron.c
===================================================================
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -97,7 +97,7 @@ static void jmicron_tuneproc (ide_drive_
static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
- u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
+ u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5);
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
}
Index: b/drivers/ide/pci/opti621.c
===================================================================
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -147,12 +147,12 @@ static void compute_pios(ide_drive_t *dr
int d;
ide_hwif_t *hwif = HWIF(drive);
- drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
Index: b/drivers/ide/pci/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -219,7 +219,7 @@ static int pdcnew_tune_chipset(ide_drive
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -145,7 +145,7 @@ static int pdc202xx_tune_chipset (ide_dr
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -219,7 +219,7 @@ static void piix_tune_pio (ide_drive_t *
*/
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -304,7 +304,7 @@ static void sc1200_tuneproc (ide_drive_t
return;
}
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -210,7 +210,7 @@ static void scc_tuneproc(ide_drive_t *dr
unsigned char speed = XFER_PIO_0;
int offset;
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
switch (mode_wanted) {
case 4:
speed = XFER_PIO_4;
Index: b/drivers/ide/pci/serverworks.c
===================================================================
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -209,7 +209,7 @@ static int svwks_tune_chipset (ide_drive
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -189,7 +189,7 @@ static void sil_tune_pio(ide_drive_t *dr
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair->present) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
if (pair_pio < tf_pio)
tf_pio = pair_pio;
@@ -221,7 +221,7 @@ static void sil_tune_pio(ide_drive_t *dr
static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -521,7 +521,7 @@ static void config_art_rwp_pio (ide_driv
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -83,7 +83,7 @@ static u8 sl82c105_tune_pio(ide_drive_t
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
drv_ctrl = get_pio_timings(drive, pio);
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -103,7 +103,7 @@ static void slc90e66_tune_pio (ide_drive
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/tc86c001.c
===================================================================
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -47,7 +47,7 @@ static int tc86c001_tune_chipset(ide_dri
static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/triflex.c
===================================================================
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -96,7 +96,7 @@ static int triflex_tune_chipset(ide_driv
static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
{
- int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ int use_pio = ide_get_best_pio_mode(drive, pio, 4);
(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
}
Index: b/drivers/ide/ppc/mpc8xx.c
===================================================================
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -431,13 +431,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
static void
m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
#endif
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
#if 1
printk("%s[%d] %s: best PIO mode: %d\n",
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -627,7 +627,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ata_pio_cycle_time(drive, pio);
switch (pmif->kind) {
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1377,12 +1377,8 @@ typedef struct ide_pio_timings_s {
/* active + recovery (+ setup for some chips) */
} ide_pio_timings_t;
-typedef struct ide_pio_data_s {
- u8 pio_mode;
-} ide_pio_data_t;
-
unsigned int ata_pio_cycle_time(ide_drive_t *, u8);
-extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
next reply other threads:[~2007-06-30 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-30 19:05 Bartlomiej Zolnierkiewicz [this message]
2007-07-02 17:41 ` [PATCH 7/15] ide: drop "PIO data" argument from ide_get_best_pio_mode() Sergei Shtylyov
2007-07-02 18:14 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706302105.20596.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.