From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 8/15] ide: remove ide_find_best_pio_mode()
Date: Sat, 30 Jun 2007 21:06:01 +0200 [thread overview]
Message-ID: <200706302106.01458.bzolnier@gmail.com> (raw)
* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags,
assign it in setup-pci.c:ide_pci_setup_ports().
* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags
and teach ide_get_best_pio_mode() about them. Also remove needless
!drive->id check while at it (drive->id is always present).
* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()
and then remove no longer needed ide_find_best_pio_mode().
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-lib.c | 13 +++++++------
drivers/ide/ide-timing.h | 18 ++----------------
drivers/ide/ide.c | 2 ++
drivers/ide/pci/amd74xx.c | 20 ++++++++++++--------
drivers/ide/pci/via82cxxx.c | 22 +++++++++++++---------
drivers/ide/setup-pci.c | 2 ++
include/linux/ide.h | 7 +++++++
7 files changed, 45 insertions(+), 39 deletions(-)
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -291,11 +291,11 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
struct hd_driveid* id = drive->id;
int overridden = 0;
- if (mode_wanted != 255) {
- pio_mode = mode_wanted;
- } else if (!drive->id) {
- pio_mode = 0;
- } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+ if (mode_wanted != 255)
+ return min_t(u8, mode_wanted, max_mode);
+
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
+ (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
} else {
pio_mode = id->tPIO;
@@ -324,7 +324,8 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
/*
* Conservative "downgrade" for all pre-ATA2 drives
*/
- if (pio_mode && pio_mode < 4) {
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
+ pio_mode && pio_mode < 4) {
pio_mode--;
printk(KERN_INFO "%s: applying conservative "
"PIO \"downgrade\"\n", drive->name);
Index: b/drivers/ide/ide-timing.h
===================================================================
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -106,21 +106,6 @@ static struct ide_timing ide_timing[] =
#define XFER_EPIO 0x01
#define XFER_PIO 0x00
-static short ide_find_best_pio_mode(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- short best = 0;
-
- /* EIDE PIO modes */
- if ((id->field_valid & 2) && (id->capability & 8)) {
- if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 :
- (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 :
- (drive->id->eide_pio_modes & 1) ? XFER_PIO_3 : 0)) return best;
- }
-
- return min_t(u8, id->tPIO, 2);
-}
-
static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT)
{
q->setup = EZ(t->setup * 1000, T);
@@ -210,7 +195,8 @@ static int ide_timing_compute(ide_drive_
*/
if ((speed & XFER_MODE) != XFER_PIO) {
- ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT);
+ u8 pio = ide_get_best_pio_mode(drive, 255, 5);
+ ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
}
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -455,6 +455,8 @@ static void ide_hwif_restore(ide_hwif_t
hwif->straight8 = tmp_hwif->straight8;
hwif->bus_state = tmp_hwif->bus_state;
+ hwif->host_flags = tmp_hwif->host_flags;
+
hwif->atapi_dma = tmp_hwif->atapi_dma;
hwif->ultra_mask = tmp_hwif->ultra_mask;
hwif->mwdma_mask = tmp_hwif->mwdma_mask;
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,5 +1,5 @@
/*
- * Version 2.20
+ * Version 2.21
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
@@ -275,10 +275,8 @@ static int amd_set_drive(ide_drive_t *dr
static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- amd_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
}
@@ -287,12 +285,14 @@ static int amd74xx_ide_dma_check(ide_dri
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ amd74xx_tune_drive(drive, 255);
+ return -1;
+ }
amd_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -455,6 +455,8 @@ static void __devinit init_hwif_amd74xx(
.autodma = AUTODMA, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
}
#define DECLARE_NV_DEV(name_str) \
@@ -465,6 +467,8 @@ static void __devinit init_hwif_amd74xx(
.autodma = AUTODMA, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
}
static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
/*
*
- * Version 3.45
+ * Version 3.46
*
* VIA IDE driver for Linux. Supported southbridges:
*
@@ -203,10 +203,8 @@ static int via_set_drive(ide_drive_t *dr
static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- via_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
}
@@ -223,12 +221,14 @@ static int via82cxxx_ide_dma_check (ide_
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ via82cxxx_tune_drive(drive, 255);
+ return -1;
+ }
via_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -503,7 +503,9 @@ static ide_pci_device_t via82cxxx_chipse
.init_hwif = init_hwif_via82cxxx,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .bootable = ON_BOARD
+ .bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
},{ /* 1 */
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
@@ -511,6 +513,8 @@ static ide_pci_device_t via82cxxx_chipse
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
}
};
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -613,6 +613,8 @@ void ide_pci_setup_ports(struct pci_dev
else
ide_hwif_setup_dma(dev, d, hwif);
bypass_legacy_dma:
+ hwif->host_flags = d->host_flags;
+
if (d->init_hwif)
/* Call chipset-specific routine
* for each enabled hwif
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -681,6 +681,8 @@ typedef struct hwif_s {
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
+ u8 host_flags;
+
u8 atapi_dma; /* host supports atapi_dma */
u8 ultra_mask;
u8 mwdma_mask;
@@ -1245,7 +1247,12 @@ typedef struct ide_pci_enablebit_s {
enum {
/* Uses ISA control ports not PCI ones. */
IDE_HFLAG_ISA_PORTS = (1 << 0),
+ /* single port device */
IDE_HFLAG_SINGLE = (1 << 1),
+ /* don't use legacy PIO blacklist */
+ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
+ /* don't use conservative PIO "downgrade" */
+ IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
};
typedef struct ide_pci_device_s {
next reply other threads:[~2007-06-30 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-30 19:06 Bartlomiej Zolnierkiewicz [this message]
2007-07-03 20:20 ` [PATCH 8/15] ide: remove ide_find_best_pio_mode() Sergei Shtylyov
2007-07-03 21:38 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706302106.01458.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.