From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
To: samuel@sortiz.org
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Subject: [PATCH 5/5] use mutex instead of semaphore in VLSI 82C147 IrDA controller driver
Date: Sun, 1 Jul 2007 18:35:13 +0200 [thread overview]
Message-ID: <20070701163513.GH3940@traven> (raw)
In-Reply-To: <20070701162529.GC3940@traven>
The VLSI 82C147 IrDA controller driver uses a semaphore as mutex. Use
the mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index bf78ef1..0538ca9 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -44,6 +44,7 @@ MODULE_LICENSE("GPL");
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -1660,8 +1661,8 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
idev = ndev->priv;
spin_lock_init(&idev->lock);
- init_MUTEX(&idev->sem);
- down(&idev->sem);
+ mutex_init(&idev->mtx);
+ mutex_lock(&idev->mtx);
idev->pdev = pdev;
if (vlsi_irda_init(ndev) < 0)
@@ -1689,12 +1690,12 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
pci_set_drvdata(pdev, ndev);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
out_freedev:
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
out_disable:
pci_disable_device(pdev);
@@ -1716,12 +1717,12 @@ static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
unregister_netdev(ndev);
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (idev->proc_entry) {
remove_proc_entry(ndev->name, vlsi_proc_root);
idev->proc_entry = NULL;
}
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
@@ -1751,7 +1752,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state != 0) { /* already suspended */
if (state.event > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1759,7 +1760,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
}
else
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1775,7 +1776,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state.event;
idev->resume_ok = 1;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1790,9 +1791,9 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state == 0) {
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
IRDA_WARNING("%s - %s: already resumed\n",
__FUNCTION__, pci_name(pdev));
return 0;
@@ -1814,7 +1815,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
* device and independently resume_ok should catch any garbage config.
*/
IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1824,7 +1825,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
netif_device_attach(ndev);
}
idev->resume_ok = 0;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index 2d3b773..ca12a60 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -728,7 +728,7 @@ typedef struct vlsi_irda_dev {
struct timeval last_rx;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mtx;
u8 resume_ok;
struct proc_dir_entry *proc_entry;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
You can chain me, you can torture me, you can even
destroy this body, but you will never imprison my mind
(Mahatma Gandhi)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
prev parent reply other threads:[~2007-07-01 16:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
2007-07-01 16:29 ` [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver Matthias Kaehlcke
2007-07-03 18:09 ` Patro, Sumant
2007-07-03 18:09 ` Patro, Sumant
2007-07-01 16:30 ` [PATCH 2/5] use mutex instead of semaphore in Philips webcam driver Matthias Kaehlcke
2007-07-01 16:32 ` [lm-sensors] [PATCH 3/5] use mutex instead of semaphore in SMSC Matthias Kaehlcke
2007-07-01 16:32 ` [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver Matthias Kaehlcke
2007-07-01 17:26 ` [lm-sensors] [PATCH 3/5] use mutex instead of semaphore in SMSC Mark M. Hoffman
2007-07-01 17:26 ` [lm-sensors] [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver Mark M. Hoffman
2007-07-01 16:33 ` [PATCH 4/5] use mutex instead of semaphore in Virtual Video driver Matthias Kaehlcke
2007-07-01 16:35 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070701163513.GH3940@traven \
--to=matthias.kaehlcke@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.