From: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org, "Robert P. J. Day" <rpjday@mindspring.com>
Subject: dead(?) MIPS config stuff
Date: Thu, 5 Jul 2007 15:46:41 +0100 [thread overview]
Message-ID: <20070705144641.GA20210@linux-mips.org> (raw)
----- Forwarded message from "Robert P. J. Day" <rpjday@mindspring.com> -----
From: "Robert P. J. Day" <rpjday@mindspring.com>
Date: Thu, 5 Jul 2007 06:38:14 -0400 (EDT)
To: Ralf Baechle <ralf@linux-mips.org>
Subject: dead(?) MIPS config stuff
Content-Type: TEXT/PLAIN; charset=US-ASCII
a brute force run of my latest dead CONFIG variable script, you can
decide if any of it is of interest.
========== AU1000_SRC_CLK ==========
arch/mips/au1000/common/time.c:206:#ifdef CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:207:#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:207:#define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK
arch/mips/au1000/common/time.c:209:#define AU1000_SRC_CLK 12000000
arch/mips/au1000/common/time.c:275: AU1000_SRC_CLK;
arch/mips/au1000/common/time.c:283: cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
========== AU1000_USE32K ==========
arch/mips/au1000/common/time.c:250:#if defined(CONFIG_AU1000_USE32K)
========== AU1XXX_PSC_SPI ==========
arch/mips/au1000/pb1200/board_setup.c:134:#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
arch/mips/au1000/pb1200/board_setup.c:137:#elif defined( CONFIG_AU1XXX_PSC_SPI )
========== CPU_R4000 ==========
arch/mips/kernel/Makefile:20:obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
arch/mips/kernel/cpu-bugs64.c:159:#ifndef CONFIG_CPU_R4000
arch/mips/kernel/cpu-bugs64.c:237:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
arch/mips/kernel/cpu-bugs64.c:307:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
========== CPU_R4400 ==========
arch/mips/kernel/cpu-bugs64.c:237:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
arch/mips/kernel/cpu-bugs64.c:307:#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
========== CPU_SR71000 ==========
arch/mips/momentum/ocelot_c/prom.c:36:#ifdef CONFIG_CPU_SR71000
arch/mips/momentum/ocelot_c/setup.c:215:#ifdef CONFIG_CPU_SR71000
arch/mips/momentum/ocelot_c/setup.c:271:#ifdef CONFIG_CPU_SR71000
arch/mips/kernel/cpu-probe.c:702: c->cputype = CPU_SR71000;
arch/mips/kernel/proc.c:85: [CPU_SR71000] = "Sandcraft SR71000",
include/asm-mips/cpu.h:191:#define CPU_SR71000 53
========== EXCITE_FCAP_GPI ==========
arch/mips/basler/excite/excite_device.c:164:#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
arch/mips/basler/excite/excite_device.c:227:#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
arch/mips/basler/excite/excite_device.c:164:#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
arch/mips/basler/excite/excite_device.c:227:#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
========== FB_XPERT98 ==========
arch/mips/au1000/common/setup.c:109:#ifdef CONFIG_FB_XPERT98
========== HT_LEVEL_TRIGGER ==========
arch/mips/pmc-sierra/yosemite/irq.c:77:#ifdef CONFIG_HT_LEVEL_TRIGGER
arch/mips/pmc-sierra/yosemite/irq.c:106:#endif /* CONFIG_HT_LEVEL_TRIGGER */
========== MIPS_HYDROGEN3 ==========
arch/mips/au1000/common/setup.c:103:#ifdef CONFIG_MIPS_HYDROGEN3
========== PCMCIA_XXS1500 ==========
arch/mips/au1000/xxs1500/board_setup.c:66:#ifdef CONFIG_PCMCIA_XXS1500
========== RM9K_GE ==========
arch/mips/basler/excite/excite_device.c:314:#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
arch/mips/basler/excite/excite_device.c:367:#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
arch/mips/basler/excite/excite_device.c:314:#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
arch/mips/basler/excite/excite_device.c:367:#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
========== SIBYTE_BCM1480_PROF ==========
arch/mips/sibyte/bcm1480/irq.c:460:#ifdef CONFIG_SIBYTE_BCM1480_PROF
arch/mips/sibyte/bcm1480/irq.c:467:#ifdef CONFIG_SIBYTE_BCM1480_PROF
========== SIBYTE_SB1250_DUART ==========
arch/mips/configs/sb1250-swarm_defconfig:665:CONFIG_SIBYTE_SB1250_DUART=y
arch/mips/configs/bigsur_defconfig:673:CONFIG_SIBYTE_SB1250_DUART=y
arch/mips/sibyte/bcm1480/irq.c:79:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/bcm1480/irq.c:407:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/sb1250/irq.c:64:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/sb1250/irq.c:362:#ifdef CONFIG_SIBYTE_SB1250_DUART
arch/mips/sibyte/cfe/console.c:49:#ifdef CONFIG_SIBYTE_SB1250_DUART
========== SMTC_IDLE_HOOK_DEBUG ==========
arch/mips/kernel/smtc.c:146:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:181:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:399:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:402:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:614:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:828:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:830:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/smtc.c:1055:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/kernel/smtc.c:1148:#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
arch/mips/kernel/process.c:54:#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
arch/mips/Kconfig.debug:40:config CONFIG_SMTC_IDLE_HOOK_DEBUG
========== SOUND_AU1X00 ==========
arch/mips/au1000/common/setup.c:116:#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
========== TX4927BUG_WORKAROUND ==========
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:141:#define CONFIG_TX4927BUG_WORKAROUND
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:672:#ifdef CONFIG_TX4927BUG_WORKAROUND
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:914:#ifdef CONFIG_TX4927BUG_WORKAROUND
========== USB_OHCI ==========
arch/mips/au1000/pb1000/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1000/board_setup.c:105:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1000/board_setup.c:119:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/pb1500/board_setup.c:59:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1500/board_setup.c:88:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1500/board_setup.c:98:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/pb1100/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/pb1100/board_setup.c:101:#endif // defined (CONFIG_USB_OHCI)
arch/mips/au1000/mtx-1/board_setup.c:57:#ifdef CONFIG_USB_OHCI
arch/mips/au1000/mtx-1/board_setup.c:61:#endif // defined (CONFIG_USB_OHCI)
--
Some of the stuff does exist intentionally such as the R4000 bits. Much
of the remainder however seems to be waiting to be chainsawed.
Ralf
next reply other threads:[~2007-07-05 14:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-05 14:46 Ralf Baechle [this message]
2007-07-05 15:01 ` dead(?) MIPS config stuff Robert P. J. Day
2007-07-05 15:26 ` Ralf Baechle
2007-07-05 15:26 ` Robert P. J. Day
2007-07-05 15:27 ` Maciej W. Rozycki
2007-07-05 16:03 ` Sergei Shtylyov
2007-07-12 16:56 ` Atsushi Nemoto
2007-07-05 16:23 ` Kevin D. Kissell
2007-07-05 16:23 ` Kevin D. Kissell
2007-07-05 16:28 ` Robert P. J. Day
2007-07-05 16:37 ` Ralf Baechle
2007-07-05 16:48 ` Geert Uytterhoeven
2007-07-05 16:36 ` Ralf Baechle
2007-07-05 16:45 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070705144641.GA20210@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=linux-mips@linux-mips.org \
--cc=rpjday@mindspring.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.