All of lore.kernel.org
 help / color / mirror / Atom feed
From: WANG Cong <xiyou.wangcong@gmail.com>
To: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: kirk@hpc.ee.ntu.edu.tw, dwmw2@infradead.org, akpm@osdl.org,
	linux-mtd@lists.infradead.org,
	LKML <linux-kernel@vger.kernel.org>
Subject: [Resend][Patch] drivers/mtd/maps/tqm8xxl.c: Do some cleanups
Date: Fri, 13 Jul 2007 11:48:22 +0800	[thread overview]
Message-ID: <20070713034822.GA2370@localhost.localdomain> (raw)
In-Reply-To: <1184256718.32199.111.camel@weaponx.rchland.ibm.com>

On Thu, Jul 12, 2007 at 11:11:58AM -0500, Josh Boyer wrote:
>On Thu, 2007-07-12 at 23:01 +0800, WANG Cong wrote:
{snip}

>> +/* trivial struct to describe partition information*/
>
>Needs a space at the end.
>
>>  struct mtd_part_def
>>  {
>>  	int nums;
>> @@ -46,7 +46,7 @@
>>  	struct mtd_partition* mtd_part;
>>  };
>> 
>> -//static struct mtd_info *mymtd;
>> +/*static struct mtd_info *mymtd;*/
>
>Just delete this...
>
>>  static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
>>  static struct map_info* map_banks[FLASH_BANK_MAX];
>>  static struct mtd_part_def part_banks[FLASH_BANK_MAX];
>> @@ -106,7 +106,7 @@
>>  	  .name = "jffs",
>>  	  .offset = 0x00200000,
>>  	  .size = 0x00200000,
>> -	  //.size = MTDPART_SIZ_FULL,
>> +	  /*.size = MTDPART_SIZ_FULL,*/
>
>Delete it...
>
>>  	}
>>  };
>>  #endif
>> @@ -121,10 +121,11 @@
>>  	flash_addr = bd->bi_flashstart;
>>  	flash_size = bd->bi_flashsize;
>> 
>> -	//request maximum flash size address space
>> +	/*request maximum flash size address space*/
>
>Spaces needed (repeat for the rest of the ones that don't have spaces
>either).

Thanks, Josh. Could you please check if this one is fine for you?


Change C++ style comments into K&R's.
Cut long lines into pieces.
Don't need to cast the return value of kmalloc().

This patch is against 2.6.22.1.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>

---
 tqm8xxl.c |   42 ++++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 18 deletions(-)

Index: linux-2.6.22.1/drivers/mtd/maps/tqm8xxl.c
===================================================================
--- a/drivers/mtd/maps/tqm8xxl.c	2007-07-13 11:33:23.000000000 +0800
+++ b/drivers/mtd/maps/tqm8xxl.c	2007-07-13 11:38:19.000000000 +0800
@@ -38,7 +38,7 @@
 #define FLASH_SIZE 0x00800000
 #define FLASH_BANK_MAX 4
 
-// trivial struct to describe partition information
+/* trivial struct to describe partition information */
 struct mtd_part_def
 {
 	int nums;
@@ -46,7 +46,6 @@
 	struct mtd_partition* mtd_part;
 };
 
-//static struct mtd_info *mymtd;
 static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
 static struct map_info* map_banks[FLASH_BANK_MAX];
 static struct mtd_part_def part_banks[FLASH_BANK_MAX];
@@ -106,7 +105,6 @@
 	  .name = "jffs",
 	  .offset = 0x00200000,
 	  .size = 0x00200000,
-	  //.size = MTDPART_SIZ_FULL,
 	}
 };
 #endif
@@ -121,10 +119,11 @@
 	flash_addr = bd->bi_flashstart;
 	flash_size = bd->bi_flashsize;
 
-	//request maximum flash size address space
+	/* request maximum flash size address space */
 	start_scan_addr = ioremap(flash_addr, flash_size);
 	if (!start_scan_addr) {
-		printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __FUNCTION__, flash_addr);
+		printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n",
+			__FUNCTION__, flash_addr);
 		return -EIO;
 	}
 
@@ -132,20 +131,23 @@
 		if(mtd_size >= flash_size)
 			break;
 
-		printk(KERN_INFO "%s: chip probing count %d\n", __FUNCTION__, idx);
+		printk(KERN_INFO "%s: chip probing count %d\n",
+			__FUNCTION__, idx);
 
 		map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
 		if(map_banks[idx] == NULL) {
 			ret = -ENOMEM;
-			/* FIXME: What if some MTD devices were probed already? */
+			/* FIXME: What if some MTD devices were probed
+			already? */
 			goto error_mem;
 		}
 
-		map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+		map_banks[idx]->name = kmalloc(16, GFP_KERNEL);
 
 		if (!map_banks[idx]->name) {
 			ret = -ENOMEM;
-			/* FIXME: What if some MTD devices were probed already? */
+			/* FIXME: What if some MTD devices were probed
+			already? */
 			goto error_mem;
 		}
 		sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
@@ -170,7 +172,7 @@
 			map_banks[idx]->phys += mtd_banks[idx-1]->size;
 		}
 
-		//start to probe flash chips
+		/* start to probe flash chips */
 		mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
 
 		if (mtd_banks[idx]) {
@@ -178,8 +180,9 @@
 			mtd_size += mtd_banks[idx]->size;
 			num_banks++;
 
-			printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __FUNCTION__, num_banks,
-			mtd_banks[idx]->name, mtd_banks[idx]->size);
+			printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n",
+				__FUNCTION__, num_banks, mtd_banks[idx]->name,
+				mtd_banks[idx]->size);
 		}
 	}
 
@@ -204,17 +207,20 @@
 
 	for(idx = 0; idx < num_banks ; idx++) {
 		if (part_banks[idx].nums == 0) {
-			printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
+			printk(KERN_NOTICE "TQM flash%d: no partition info "
+				"available, registering whole flash at once\n",
+				idx);
 			add_mtd_device(mtd_banks[idx]);
 		} else {
-			printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
-					idx, part_banks[idx].type);
-			add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part,
-								part_banks[idx].nums);
+			printk(KERN_NOTICE "TQM flash%d: Using %s partition "
+				"definition\n", idx, part_banks[idx].type);
+			add_mtd_partitions(mtd_banks[idx],
+				part_banks[idx].mtd_part, part_banks[idx].nums);
 		}
 	}
 #else
-	printk(KERN_NOTICE "TQM flash: registering %d whole flash banks at once\n", num_banks);
+	printk(KERN_NOTICE "TQM flash: registering %d whole flash banks at "
+		"once\n", num_banks);
 	for(idx = 0 ; idx < num_banks ; idx++)
 		add_mtd_device(mtd_banks[idx]);
 #endif

  reply	other threads:[~2007-07-13  3:46 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-12 15:01 [Patch] drivers/mtd/maps/tqm8xxl.c: Style cleanups WANG Cong
2007-07-12 15:01 ` WANG Cong
2007-07-12 16:11 ` Josh Boyer
2007-07-12 16:11   ` Josh Boyer
2007-07-13  3:48   ` WANG Cong [this message]
2007-07-13  9:56     ` [Resend][Patch] drivers/mtd/maps/tqm8xxl.c: Do some cleanups David Woodhouse
2007-07-13  9:56       ` David Woodhouse
2007-07-13 13:14       ` WANG Cong
2007-07-13 13:14         ` WANG Cong
2007-07-13 13:38         ` David Woodhouse
2007-07-13 13:38           ` David Woodhouse
2007-07-13 14:24           ` Ralf Baechle
2007-07-13 14:24             ` Ralf Baechle
2007-07-13 14:31             ` David Woodhouse
2007-07-13 14:31               ` David Woodhouse
2007-07-13 15:11               ` WANG Cong
2007-07-13 15:11                 ` WANG Cong
2007-07-13 15:05             ` WANG Cong
2007-07-13 15:05               ` WANG Cong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070713034822.GA2370@localhost.localdomain \
    --to=xiyou.wangcong@gmail.com \
    --cc=akpm@osdl.org \
    --cc=dwmw2@infradead.org \
    --cc=jwboyer@linux.vnet.ibm.com \
    --cc=kirk@hpc.ee.ntu.edu.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.