From mboxrd@z Thu Jan 1 00:00:00 1970 From: stan Subject: Re: Install of alsa 1.0.14.final on Fedora 7 Date: Sun, 15 Jul 2007 12:47:00 -0700 Message-ID: <20070715124700.4d35d20e@localhost.localdomain> References: <20070713124843.59729a4b@localhost.localdomain> <20070714000931.hqd2n4icam20ow8g@webmail.dsl-only.net> <20070714072701.057106a3@localhost.localdomain> <20070714081537.ayf2b2byrxq88kok@webmail.dsl-only.net> <20070714154121.0f7c834c@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from fed1rmmtao104.cox.net (fed1rmmtao104.cox.net [68.230.241.42]) by alsa0.perex.cz (Postfix) with ESMTP id 8EC09243A3 for ; Sun, 15 Jul 2007 21:47:02 +0200 (CEST) Received: from fed1rmimpo02.cox.net ([70.169.32.72]) by fed1rmmtao104.cox.net (InterMail vM.7.08.02.01 201-2186-121-102-20070209) with ESMTP id <20070715194702.TBYV1393.fed1rmmtao104.cox.net@fed1rmimpo02.cox.net> for ; Sun, 15 Jul 2007 15:47:02 -0400 In-Reply-To: <20070714154121.0f7c834c@localhost.localdomain> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Sat, 14 Jul 2007 15:41:21 -0700 stan wrote: > And the sound is missing from my app whether I use default or > plughw:0,0 now. The plughw:0,0 seems to setup OK and the app shows > that it continues to send output, it just doesn't sound. Seems like > it is just a small glitch somewhere. Could be leftovers from the > cleaned up install too. Couldn't get this to work as long as I was using time based buffer allocation. As soon as I switched back to using size based buffer allocation, sound was working again. And as a bonus, the original problem I reported about high data rates not working under 1.0.14.rc3 went away. I suspect something somewhere got updated with 1.0.14.final and is still there despite my efforts to remove everything. And it works for both plughw:0,0 and default, though there is some speed degradation using default compared to plughw:0,0. I can run plughw:0,0 at 96000 without underruns, but default has a few underruns at that rate on the test file.