[patch 02/14] Rename 4xx paths to 40x

[Josh Boyer <jwboyer@linux.vnet.ibm.com>]

4xx is a bit of a misnomer for certain things, as they really apply to PowerPC
40x only.  Rename some of the files to clean this up.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

---
 arch/powerpc/Makefile               |    2 
 arch/powerpc/kernel/Makefile        |    2 
 arch/powerpc/kernel/head_40x.S      | 1021 ++++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_4xx.S      | 1021 ------------------------------------
 arch/powerpc/mm/40x_mmu.c           |  135 ++++
 arch/powerpc/mm/4xx_mmu.c           |  135 ----
 arch/powerpc/mm/Makefile            |    2 
 arch/powerpc/platforms/40x/Kconfig  |  208 +++++++
 arch/powerpc/platforms/40x/Makefile |    1 
 arch/powerpc/platforms/4xx/Kconfig  |  208 -------
 arch/powerpc/platforms/4xx/Makefile |    1 
 11 files changed, 1368 insertions(+), 1368 deletions(-)

--- linux-2.6.orig/arch/powerpc/Makefile
+++ linux-2.6/arch/powerpc/Makefile
@@ -123,7 +123,7 @@ CFLAGS += $(cpu-as-y)
 head-y				:= arch/powerpc/kernel/head_32.o
 head-$(CONFIG_PPC64)		:= arch/powerpc/kernel/head_64.o
 head-$(CONFIG_8xx)		:= arch/powerpc/kernel/head_8xx.o
-head-$(CONFIG_4xx)		:= arch/powerpc/kernel/head_4xx.o
+head-$(CONFIG_40x)		:= arch/powerpc/kernel/head_40x.o
 head-$(CONFIG_44x)		:= arch/powerpc/kernel/head_44x.o
 head-$(CONFIG_FSL_BOOKE)	:= arch/powerpc/kernel/head_fsl_booke.o
 
--- linux-2.6.orig/arch/powerpc/kernel/Makefile
+++ linux-2.6/arch/powerpc/kernel/Makefile
@@ -46,7 +46,7 @@ ifeq ($(CONFIG_PPC_MERGE),y)
 
 extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
 extra-$(CONFIG_PPC64)		:= head_64.o
-extra-$(CONFIG_40x)		:= head_4xx.o
+extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
--- /dev/null
+++ linux-2.6/arch/powerpc/kernel/head_40x.S
@@ -0,0 +1,1021 @@
+/*
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
+ *
+ *    Module name: head_4xx.S
+ *
+ *    Description:
+ *      Kernel execution entry point code.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ *   r4 - Starting address of the init RAM disk
+ *   r5 - Ending address of the init RAM disk
+ *   r6 - Start of kernel command line string (e.g. "mem=96m")
+ *   r7 - End of kernel command line string
+ *
+ * This is all going to change RSN when we add bi_recs.......  -- Dan
+ */
+	.text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+
+	/* Save parameters we are passed.
+	*/
+	mr	r31,r3
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 16 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+turn_on_mmu:
+	lis	r0,MSR_KERNEL@h
+	ori	r0,r0,MSR_KERNEL@l
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+	b	.			/* prevent prefetch past rfi */
+
+/*
+ * This area is used for temporarily saving registers during the
+ * critical exception prolog.
+ */
+	. = 0xc0
+crit_save:
+_GLOBAL(crit_r10)
+	.space	4
+_GLOBAL(crit_r11)
+	.space	4
+
+/*
+ * Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). We assume SPRG3 has the
+ * physical address of the current task thread_struct.
+ * Note that we have to have decremented r1 before we write to any fields
+ * of the exception frame, since a critical interrupt could occur at any
+ * time, and it will write to the area immediately below the current r1.
+ */
+#define NORMAL_EXCEPTION_PROLOG						     \
+	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
+	mtspr	SPRN_SPRG1,r11;						     \
+	mtspr	SPRN_SPRG2,r1;						     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	beq	1f;							     \
+	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
+	addi	r1,r1,THREAD_SIZE;					     \
+1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r1);							     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mfspr	r10,SPRN_SPRG0;						     \
+	stw	r10,GPR10(r11);						     \
+	mfspr	r12,SPRN_SPRG1;						     \
+	stw	r12,GPR11(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r10,SPRN_SPRG2;						     \
+	mfspr	r12,SPRN_SRR0;						     \
+	stw	r10,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR1;						     \
+	stw	r10,0(r11);						     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions.  This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors.
+ */
+#define CRITICAL_EXCEPTION_PROLOG					     \
+	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
+	stw	r11,crit_r11@l(0);					     \
+	mfcr	r10;			/* save CR in r10 for now	   */\
+	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
+	andi.	r11,r11,MSR_PR;						     \
+	lis	r11,critical_stack_top@h;				     \
+	ori	r11,r11,critical_stack_top@l;				     \
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+	addi	r11,r11,THREAD_SIZE;					     \
+1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+	tophys(r11,r11);						     \
+	stw	r10,_CCR(r11);          /* save various registers	   */\
+	stw	r12,GPR12(r11);						     \
+	stw	r9,GPR9(r11);						     \
+	mflr	r10;							     \
+	stw	r10,_LINK(r11);						     \
+	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
+	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
+	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
+	stw	r9,_ESR(r11);		/* exception was taken		   */\
+	mfspr	r12,SPRN_SRR2;						     \
+	stw	r1,GPR1(r11);						     \
+	mfspr	r9,SPRN_SRR3;						     \
+	stw	r1,0(r11);						     \
+	tovirt(r1,r11);							     \
+	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
+	stw	r0,GPR0(r11);						     \
+	SAVE_4GPRS(3, r11);						     \
+	SAVE_2GPRS(7, r11)
+
+	/*
+	 * State at this point:
+	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
+	 * r10 saved in crit_r10 and in stack frame, trashed
+	 * r11 saved in crit_r11 and in stack frame,
+	 *	now phys stack/exception frame pointer
+	 * r12 saved in stack frame, now saved SRR2
+	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
+	 * LR, DEAR, ESR in stack frame
+	 * r1 saved in stack frame, now virt stack/excframe pointer
+	 * r0, r3-r8 saved in stack frame
+	 */
+
+/*
+ * Exception vectors.
+ */
+#define	START_EXCEPTION(n, label)					     \
+	. = n;								     \
+label:
+
+#define EXCEPTION(n, label, hdlr, xfer)				\
+	START_EXCEPTION(n, label);				\
+	NORMAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr)			\
+	START_EXCEPTION(n, label);				\
+	CRITICAL_EXCEPTION_PROLOG;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
+	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+			  NOCOPY, crit_transfer_to_handler,	\
+			  ret_from_crit_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,_TRAP(r11);					\
+	lis	r10,msr@h;					\
+	ori	r10,r10,msr@l;					\
+	copyee(r10, r9);					\
+	bl	tfer;		 				\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+
+/*
+ * 0x0100 - Critical Interrupt Exception
+ */
+	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
+
+/*
+ * 0x0200 - Machine Check Exception
+ */
+	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+
+/*
+ * 0x0300 - Data Storage Exception
+ * This happens for just a few reasons.  U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit.  Otherwise, we call heavywight functions to do the work.
+ */
+	START_EXCEPTION(0x0300,	DataStorage)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+
+	/* First, check if it was a zone fault (which means a user
+	* tried to access a kernel or read-protected page - always
+	* a SEGV).  All other faults here must be stores, so no
+	* need to check ESR_DST as well. */
+	mfspr	r10, SPRN_ESR
+	andis.	r10, r10, ESR_DIZ@h
+	bne	2f
+
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r11, 0(r11)		/* Get L1 entry */
+	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+
+	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail if not */
+
+	/* Update 'changed'.
+	*/
+	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	stw	r11, 0(r12)		/* Update Linux page table */
+
+	/* Most of the Linux PTE is ready to load into the TLB LO.
+	 * We set ZSEL, where only the LS-bit determines user access.
+	 * We set execute, because we don't have the granularity to
+	 * properly set this at the page level (Linux problem).
+	 * If shared is set, we cause a zero PID->TID load.
+	 * Many of these bits are software only.  Bits we don't set
+	 * here we (properly should) assume have the appropriate value.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
+
+	/* find the TLB index that caused the fault.  It has to be here.
+	*/
+	tlbsx	r9, 0, r10
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+2:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/*
+ * 0x0400 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages.
+ */
+	START_EXCEPTION(0x0400, InstructionAccess)
+	NORMAL_EXCEPTION_PROLOG
+	mr	r4,r12			/* Pass SRR0 as arg2 */
+	li	r5,0			/* Pass zero as arg3 */
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* 0x0500 - External Interrupt Exception */
+	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* 0x0600 - Alignment Exception */
+	START_EXCEPTION(0x0600, Alignment)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
+	stw	r4,_DEAR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, alignment_exception)
+
+/* 0x0700 - Program Exception */
+	START_EXCEPTION(0x0700, ProgramCheck)
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
+	stw	r4,_ESR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x700, program_check_exception)
+
+	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
+
+/* 0x0C00 - System Call Exception */
+	START_EXCEPTION(0x0C00,	SystemCall)
+	NORMAL_EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
+
+/* 0x1000 - Programmable Interval Timer (PIT) Exception */
+	START_EXCEPTION(0x1000, Decrementer)
+	NORMAL_EXCEPTION_PROLOG
+	lis	r0,TSR_PIS@h
+	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_LITE(0x1000, timer_interrupt)
+
+#if 0
+/* NOTE:
+ * FIT and WDT handlers are not implemented yet.
+ */
+
+/* 0x1010 - Fixed Interval Timer (FIT) Exception
+*/
+	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
+
+/* 0x1020 - Watchdog Timer (WDT) Exception
+*/
+#ifdef CONFIG_BOOKE_WDT
+	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
+#else
+	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
+#endif
+#endif
+
+/* 0x1100 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it.  The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+	START_EXCEPTION(0x1100,	DTLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	DataAccess
+
+/* 0x1200 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from different
+ * registers and bailout to a different point.
+ */
+	START_EXCEPTION(0x1200,	ITLBMiss)
+	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+	stw     r12, 0(r0)
+	stw     r9, 4(r0)
+	mfcr    r11
+	mfspr   r12, SPRN_PID
+	stw     r11, 8(r0)
+	stw     r12, 12(r0)
+#else
+	mtspr	SPRN_SPRG4, r12
+	mtspr	SPRN_SPRG5, r9
+	mfcr	r11
+	mfspr	r12, SPRN_PID
+	mtspr	SPRN_SPRG7, r11
+	mtspr	SPRN_SPRG6, r12
+#endif
+	mfspr	r10, SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	li	r9, 0
+	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
+	b	4f
+
+	/* Get the PGD for the current thread.
+	 */
+3:
+	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+4:
+	tophys(r11, r11)
+	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
+	lwz	r12, 0(r11)		/* Get L1 entry */
+	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
+	beq	2f			/* Bail if no table */
+
+	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
+	lwz	r11, 0(r12)		/* Get Linux PTE */
+	andi.	r9, r11, _PAGE_PRESENT
+	beq	5f
+
+	ori	r11, r11, _PAGE_ACCESSED
+	stw	r11, 0(r12)
+
+	/* Create TLB tag.  This is the faulting address plus a static
+	 * set of bits.  These are size, valid, E, U0.
+	*/
+	li	r12, 0x00c0
+	rlwimi	r10, r12, 0, 20, 31
+
+	b	finish_tlb_load
+
+2:	/* Check for possible large-page pmd entry */
+	rlwinm.	r9, r12, 2, 22, 24
+	beq	5f
+
+	/* Create TLB tag.  This is the faulting address, plus a static
+	 * set of bits (valid, E, U0) plus the size from the PMD.
+	 */
+	ori	r9, r9, 0x40
+	rlwimi	r10, r9, 0, 20, 31
+	mr	r11, r12
+
+	b	finish_tlb_load
+
+5:
+	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	b	InstructionAccess
+
+	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+#ifdef CONFIG_IBM405_ERR51
+	/* 405GP errata 51 */
+	START_EXCEPTION(0x1700, Trap_17)
+	b DTLBMiss
+#else
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+#endif
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved.  This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_SRR1, which will still have
+ * the MSR_DE bit set.
+ */
+	/* 0x2000 - Debug Exception */
+	START_EXCEPTION(0x2000, DebugTrap)
+	CRITICAL_EXCEPTION_PROLOG
+
+	/*
+	 * If this is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the SRR3 value and clearing the debug status.
+	 */
+	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r10,r10,DBSR_IC@h
+	beq+	2f
+
+	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
+	beq	1f			/* branch and fix it up */
+
+	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
+	cmplwi  r10,0x2100
+	bgt+    2f			/* address above exception vectors */
+
+	/* here it looks like we got an inappropriate debug exception. */
+1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
+	lis	r10,DBSR_IC@h		/* clear the IC event */
+	mtspr	SPRN_DBSR,r10
+	/* restore state and get out */
+	lwz	r10,_CCR(r11)
+	lwz	r0,GPR0(r11)
+	lwz	r1,GPR1(r11)
+	mtcrf	0x80,r10
+	mtspr	SPRN_SRR2,r12
+	mtspr	SPRN_SRR3,r9
+	lwz	r9,GPR9(r11)
+	lwz	r12,GPR12(r11)
+	lwz	r10,crit_r10@l(0)
+	lwz	r11,crit_r11@l(0)
+	PPC405_ERR77_SYNC
+	rfci
+	b	.
+
+	/* continue normal handling for a critical exception... */
+2:	mfspr	r4,SPRN_DBSR
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
+		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+/*
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+DataAccess:
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Other PowerPC processors, namely those derived from the 6xx-series
+ * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
+ * However, for the 4xx-series processors these are neither defined nor
+ * reserved.
+ */
+
+	/* Damn, I came up one instruction too many to fit into the
+	 * exception space :-).  Both the instruction and data TLB
+	 * miss get to this point to load the TLB.
+	 * 	r10 - TLB_TAG value
+	 * 	r11 - Linux PTE
+	 *	r12, r9 - avilable to use
+	 *	PID - loaded with proper value when we get here
+	 *	Upon exit, we reload everything and RFI.
+	 * Actually, it will fit now, but oh well.....a common place
+	 * to load the TLB.
+	 */
+tlb_4xx_index:
+	.long	0
+finish_tlb_load:
+	/* load the next available TLB index.
+	*/
+	lwz	r9, tlb_4xx_index@l(0)
+	addi	r9, r9, 1
+	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
+	stw	r9, tlb_4xx_index@l(0)
+
+6:
+	/*
+	 * Clear out the software-only bits in the PTE to generate the
+	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
+	 * top 3 bits of the zone field, and M.
+	 */
+	li	r12, 0x0ce2
+	andc	r11, r11, r12
+
+	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
+	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
+
+	/* Done...restore registers and get out of here.
+	*/
+#ifdef CONFIG_403GCX
+	lwz     r12, 12(r0)
+	lwz     r11, 8(r0)
+	mtspr   SPRN_PID, r12
+	mtcr    r11
+	lwz     r9, 4(r0)
+	lwz     r12, 0(r0)
+#else
+	mfspr	r12, SPRN_SPRG6
+	mfspr	r11, SPRN_SPRG7
+	mtspr	SPRN_PID, r12
+	mtcr	r11
+	mfspr	r9, SPRN_SPRG5
+	mfspr	r12, SPRN_SPRG4
+#endif
+	mfspr	r11, SPRN_SPRG1
+	mfspr	r10, SPRN_SPRG0
+	PPC405_ERR77_SYNC
+	rfi			/* Should sync shadow TLBs */
+	b	.		/* prevent prefetch past rfi */
+
+/* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The PowerPC 4xx family of processors do not have an FPU, so this just
+ * returns.
+ */
+_GLOBAL(giveup_fpu)
+	blr
+
+/* This is where the main kernel code starts.
+ */
+start_here:
+
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 4xx, all we have to do is invalidate the TLB to clear
+ * the old 16M byte TLB mappings.
+ */
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
+	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+	b	.		/* prevent prefetch past rfi */
+
+/* Load up the kernel context */
+2:
+	sync			/* Flush to memory before changing TLB */
+	tlbia
+	isync			/* Flush shadow TLBs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	lis	r4,MSR_KERNEL@h
+	ori	r4,r4,MSR_KERNEL@l
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+	b	.		/* prevent prefetch past rfi */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+ * virtual to physical and more importantly sets the cache mode.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+	isync
+
+	/* We should still be executing code at physical address 0x0000xxxx
+	 * at this point. However, start_here is at virtual address
+	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
+	ori	r3,r3,KERNELBASE@l
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	iccci	r0,r3			/* Invalidate the i-cache before use */
+
+	/* Load the kernel PID.
+	*/
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Configure and load two entries into TLB slots 62 and 63.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
+	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
+
+	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
+
+	lis	r3,SERIAL_DEBUG_IO_BASE@h
+	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
+	mr	r4,r3
+	clrrwi	r4,r4,12
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	clrrwi	r3,r3,12
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	li	r0,0			/* TLB slot 0 */
+	tlbwe	r4,r0,TLB_DATA
+	tlbwe	r3,r0,TLB_TAG
+#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
+
+	isync
+
+	/* Establish the exception vector base
+	*/
+	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
+	tophys(r0,r4)			/* Use the physical address */
+	mtspr	SPRN_EVPR,r0
+
+	blr
+
+_GLOBAL(abort)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+	sync
+	mtspr	SPRN_PID,r3
+	isync				/* Need an isync to flush shadow */
+					/* TLBs after changing PID */
+	blr
+
+/* We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+	.data
+	.align	12
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+
+/* Stack for handling critical exceptions from kernel mode */
+	.section .bss
+        .align 12
+exception_stack_bottom:
+	.space	4096
+critical_stack_top:
+	.globl	exception_stack_top
+exception_stack_top:
+
+/* This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+	.space	8
--- linux-2.6.orig/arch/powerpc/kernel/head_4xx.S
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *
- *
- *    Module name: head_4xx.S
- *
- *    Description:
- *      Kernel execution entry point code.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=96m")
- *   r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs.......  -- Dan
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
-	lis	r0,MSR_KERNEL@h
-	ori	r0,r0,MSR_KERNEL@l
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
-	. = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
-	.space	4
-_GLOBAL(crit_r11)
-	.space	4
-
-/*
- * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
- */
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r1);							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions.  This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-#define CRITICAL_EXCEPTION_PROLOG					     \
-	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
-	stw	r11,crit_r11@l(0);					     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r11);						     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,SPRN_SRR2;						     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR3;						     \
-	stw	r1,0(r11);						     \
-	tovirt(r1,r11);							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-	/*
-	 * State at this point:
-	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
-	 * r10 saved in crit_r10 and in stack frame, trashed
-	 * r11 saved in crit_r11 and in stack frame,
-	 *	now phys stack/exception frame pointer
-	 * r12 saved in stack frame, now saved SRR2
-	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
-	 * LR, DEAR, ESR in stack frame
-	 * r1 saved in stack frame, now virt stack/excframe pointer
-	 * r0, r3-r8 saved in stack frame
-	 */
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(n, label)					     \
-	. = n;								     \
-label:
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(n, label);				\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(n, label);				\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler,	\
-			  ret_from_crit_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,_TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
-	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons.  U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit.  Otherwise, we call heavywight functions to do the work.
- */
-	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-
-	/* First, check if it was a zone fault (which means a user
-	* tried to access a kernel or read-protected page - always
-	* a SEGV).  All other faults here must be stores, so no
-	* need to check ESR_DST as well. */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_DIZ@h
-	bne	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r11, 0(r11)		/* Get L1 entry */
-	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-
-	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 0(r12)		/* Update Linux page table */
-
-	/* Most of the Linux PTE is ready to load into the TLB LO.
-	 * We set ZSEL, where only the LS-bit determines user access.
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
-
-	/* find the TLB index that caused the fault.  It has to be here.
-	*/
-	tlbsx	r9, 0, r10
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
-	START_EXCEPTION(0x0400, InstructionAccess)
-	NORMAL_EXCEPTION_PROLOG
-	mr	r4,r12			/* Pass SRR0 as arg2 */
-	li	r5,0			/* Pass zero as arg3 */
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* 0x0500 - External Interrupt Exception */
-	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* 0x0600 - Alignment Exception */
-	START_EXCEPTION(0x0600, Alignment)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
-	stw	r4,_DEAR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* 0x0700 - Program Exception */
-	START_EXCEPTION(0x0700, ProgramCheck)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
-	stw	r4,_ESR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x700, program_check_exception)
-
-	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
-
-/* 0x0C00 - System Call Exception */
-	START_EXCEPTION(0x0C00,	SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
-	START_EXCEPTION(0x1000, Decrementer)
-	NORMAL_EXCEPTION_PROLOG
-	lis	r0,TSR_PIS@h
-	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_LITE(0x1000, timer_interrupt)
-
-#if 0
-/* NOTE:
- * FIT and WDT handlers are not implemented yet.
- */
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception
-*/
-	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
-
-/* 0x1020 - Watchdog Timer (WDT) Exception
-*/
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
-#endif
-#endif
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it.  The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
-	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
-	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionAccess
-
-	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_IBM405_ERR51
-	/* 405GP errata 51 */
-	START_EXCEPTION(0x1700, Trap_17)
-	b DTLBMiss
-#else
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-#endif
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
-	/* 0x2000 - Debug Exception */
-	START_EXCEPTION(0x2000, DebugTrap)
-	CRITICAL_EXCEPTION_PROLOG
-
-	/*
-	 * If this is a single step or branch-taken exception in an
-	 * exception entry sequence, it was probably meant to apply to
-	 * the code where the exception occurred (since exception entry
-	 * doesn't turn off DE automatically).  We simulate the effect
-	 * of turning off DE on entry to an exception handler by turning
-	 * off DE in the SRR3 value and clearing the debug status.
-	 */
-	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
-	andis.	r10,r10,DBSR_IC@h
-	beq+	2f
-
-	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
-	beq	1f			/* branch and fix it up */
-
-	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
-	cmplwi  r10,0x2100
-	bgt+    2f			/* address above exception vectors */
-
-	/* here it looks like we got an inappropriate debug exception. */
-1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
-	lis	r10,DBSR_IC@h		/* clear the IC event */
-	mtspr	SPRN_DBSR,r10
-	/* restore state and get out */
-	lwz	r10,_CCR(r11)
-	lwz	r0,GPR0(r11)
-	lwz	r1,GPR1(r11)
-	mtcrf	0x80,r10
-	mtspr	SPRN_SRR2,r12
-	mtspr	SPRN_SRR3,r9
-	lwz	r9,GPR9(r11)
-	lwz	r12,GPR12(r11)
-	lwz	r10,crit_r10@l(0)
-	lwz	r11,crit_r11@l(0)
-	PPC405_ERR77_SYNC
-	rfci
-	b	.
-
-	/* continue normal handling for a critical exception... */
-2:	mfspr	r4,SPRN_DBSR
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
-		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
-	/* Damn, I came up one instruction too many to fit into the
-	 * exception space :-).  Both the instruction and data TLB
-	 * miss get to this point to load the TLB.
-	 * 	r10 - TLB_TAG value
-	 * 	r11 - Linux PTE
-	 *	r12, r9 - avilable to use
-	 *	PID - loaded with proper value when we get here
-	 *	Upon exit, we reload everything and RFI.
-	 * Actually, it will fit now, but oh well.....a common place
-	 * to load the TLB.
-	 */
-tlb_4xx_index:
-	.long	0
-finish_tlb_load:
-	/* load the next available TLB index.
-	*/
-	lwz	r9, tlb_4xx_index@l(0)
-	addi	r9, r9, 1
-	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
-	stw	r9, tlb_4xx_index@l(0)
-
-6:
-	/*
-	 * Clear out the software-only bits in the PTE to generate the
-	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
-	 * top 3 bits of the zone field, and M.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_GLOBAL(giveup_fpu)
-	blr
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
-	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-	b	.		/* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
-	sync			/* Flush to memory before changing TLB */
-	tlbia
-	isync			/* Flush shadow TLBs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	lis	r4,MSR_KERNEL@h
-	ori	r4,r4,MSR_KERNEL@l
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-	b	.		/* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 16 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-	isync
-
-	/* We should still be executing code at physical address 0x0000xxxx
-	 * at this point. However, start_here is at virtual address
-	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
-	 * translation is enabled.
-	 */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-	tophys(r4,r3)			/* Load the kernel physical address */
-
-	iccci	r0,r3			/* Invalidate the i-cache before use */
-
-	/* Load the kernel PID.
-	*/
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Configure and load two entries into TLB slots 62 and 63.
-	 * In case we are pinning TLBs, these are reserved in by the
-	 * other TLB functions.  If not reserving, then it doesn't
-	 * matter where they are loaded.
-	 */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
-
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
-	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
-
-	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
-	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
-
-	lis	r3,SERIAL_DEBUG_IO_BASE@h
-	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
-	mr	r4,r3
-	clrrwi	r4,r4,12
-	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
-
-	clrrwi	r3,r3,12
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
-
-	li	r0,0			/* TLB slot 0 */
-	tlbwe	r4,r0,TLB_DATA
-	tlbwe	r3,r0,TLB_TAG
-#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
-
-	isync
-
-	/* Establish the exception vector base
-	*/
-	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
-	tophys(r0,r4)			/* Use the physical address */
-	mtspr	SPRN_EVPR,r0
-
-	blr
-
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	sync
-	mtspr	SPRN_PID,r3
-	isync				/* Need an isync to flush shadow */
-					/* TLBs after changing PID */
-	blr
-
-/* We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
-/* This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
--- /dev/null
+++ linux-2.6/arch/powerpc/mm/40x_mmu.c
@@ -0,0 +1,135 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the 4xx's zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+
+        mtspr(SPRN_ZPR, 0x10000000);
+
+	flush_instruction_cache();
+
+	/*
+	 * Set up the real-mode cache parameters for the exception vector
+	 * handlers (which are run in real-mode).
+	 */
+
+        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
+
+        /*
+	 * Cache instruction and data space where the exception
+	 * vectors and the kernel live in real-mode.
+	 */
+
+        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
+        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M	(1<<24)
+#define LARGE_PAGE_SIZE_4M	(1<<22)
+
+unsigned long __init mmu_mapin_ram(void)
+{
+	unsigned long v, s;
+	phys_addr_t p;
+
+	v = KERNELBASE;
+	p = PPC_MEMSTART;
+	s = 0;
+
+	if (__map_without_ltlbs) {
+		return s;
+	}
+
+	while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+		pmd_t *pmdp;
+		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+		pmdp = pmd_offset(pgd_offset_k(v), v);
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+		pmd_val(*pmdp++) = val;
+
+		v += LARGE_PAGE_SIZE_16M;
+		p += LARGE_PAGE_SIZE_16M;
+		s += LARGE_PAGE_SIZE_16M;
+	}
+
+	while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+		pmd_t *pmdp;
+		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+		pmdp = pmd_offset(pgd_offset_k(v), v);
+		pmd_val(*pmdp) = val;
+
+		v += LARGE_PAGE_SIZE_4M;
+		p += LARGE_PAGE_SIZE_4M;
+		s += LARGE_PAGE_SIZE_4M;
+	}
+
+	return s;
+}
--- linux-2.6.orig/arch/powerpc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	/*
-	 * The Zone Protection Register (ZPR) defines how protection will
-	 * be applied to every page which is a member of a given zone. At
-	 * present, we utilize only two of the 4xx's zones.
-	 * The zone index bits (of ZSEL) in the PTE are used for software
-	 * indicators, except the LSB.  For user access, zone 1 is used,
-	 * for kernel access, zone 0 is used.  We set all but zone 1
-	 * to zero, allowing only kernel access as indicated in the PTE.
-	 * For zone 1, we set a 01 binary (a value of 10 will not work)
-	 * to allow user access as indicated in the PTE.  This also allows
-	 * kernel access as indicated in the PTE.
-	 */
-
-        mtspr(SPRN_ZPR, 0x10000000);
-
-	flush_instruction_cache();
-
-	/*
-	 * Set up the real-mode cache parameters for the exception vector
-	 * handlers (which are run in real-mode).
-	 */
-
-        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
-
-        /*
-	 * Cache instruction and data space where the exception
-	 * vectors and the kernel live in real-mode.
-	 */
-
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M	(1<<24)
-#define LARGE_PAGE_SIZE_4M	(1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long v, s;
-	phys_addr_t p;
-
-	v = KERNELBASE;
-	p = PPC_MEMSTART;
-	s = 0;
-
-	if (__map_without_ltlbs) {
-		return s;
-	}
-
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-
-		v += LARGE_PAGE_SIZE_16M;
-		p += LARGE_PAGE_SIZE_16M;
-		s += LARGE_PAGE_SIZE_16M;
-	}
-
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp) = val;
-
-		v += LARGE_PAGE_SIZE_4M;
-		p += LARGE_PAGE_SIZE_4M;
-		s += LARGE_PAGE_SIZE_4M;
-	}
-
-	return s;
-}
--- linux-2.6.orig/arch/powerpc/mm/Makefile
+++ linux-2.6/arch/powerpc/mm/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_PPC64)		+= init_64.o pgtabl
 				   hash_utils_64.o hash_low_64.o tlb_64.o \
 				   slb_low.o slb.o stab.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o hash_low_32.o tlb_32.o
-obj-$(CONFIG_40x)		+= 4xx_mmu.o
+obj-$(CONFIG_40x)		+= 40x_mmu.o
 obj-$(CONFIG_44x)		+= 44x_mmu.o
 obj-$(CONFIG_FSL_BOOKE)		+= fsl_booke_mmu.o
 obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/40x/Kconfig
@@ -0,0 +1,208 @@
+config 4xx
+	bool
+	depends on 40x || 44x
+	default y
+
+config BOOKE
+	bool
+	depends on 44x
+	default y
+
+menu "AMCC 40x options"
+	depends on 40x
+
+#config BUBINGA
+#	bool "Bubinga"
+#	depends on 40x
+#	default n
+#	select 405EP
+#	help
+#	  This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+#	bool "CPCI405"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the CPCI405 board.
+
+#config EP405
+#	bool "EP405/EP405PC"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+#	bool "EP405PC Support"
+#	depends on EP405
+#	default y
+#	help
+#	  This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+#	bool "Redwood-5"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+#	bool "Redwood-6"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+#	bool "Sycamore"
+#	depends on 40x
+#	default n
+#	select 405GPR
+#	help
+#	  This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+#	bool "Walnut"
+#	depends on 40x
+#	default y
+#	select 405GP
+#	help
+#	  This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+#	bool "Xilinx-ML300"
+#	depends on 40x
+#	default y
+#	select VIRTEX_II_PRO
+#	help
+#	  This option enables support for the Xilinx ML300 evaluation board.
+
+endmenu
+
+# 40x specific CPU modules, selected based on the board above.
+config NP405H
+	bool
+	#depends on ASH
+
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
+	bool
+	#depends on OAK
+	select IBM405_ERR51
+
+config 405GP
+	bool
+	select IBM405_ERR77
+	select IBM405_ERR51
+
+config 405EP
+	bool
+
+config 405GPR
+	bool
+
+config VIRTEX_II_PRO
+	bool
+	select IBM405_ERR77
+	select IBM405_ERR51
+
+config STB03xxx
+	bool
+	select IBM405_ERR77
+	select IBM405_ERR51
+
+# 40x errata/workaround config symbols, selected by the CPU models above
+
+# All 405-based cores up until the 405GPR and 405EP have this errata.
+config IBM405_ERR77
+	bool
+
+# All 40x-based cores, up until the 405GPR and 405EP have this errata.
+config IBM405_ERR51
+	bool
+
+menu "AMCC 44x options"
+	depends on 44x
+
+#config BAMBOO
+#	bool "Bamboo"
+#	depends on 44x
+#	default n
+#	select 440EP
+#	help
+#	  This option enables support for the IBM PPC440EP evaluation board.
+
+config EBONY
+	bool "Ebony"
+	depends on 44x
+	default y
+	select 440GP
+	help
+	  This option enables support for the IBM PPC440GP evaluation board.
+
+#config LUAN
+#	bool "Luan"
+#	depends on 44x
+#	default n
+#	select 440SP
+#	help
+#	  This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+#	bool "Ocotea"
+#	depends on 44x
+#	default n
+#	select 440GX
+#	help
+#	  This option enables support for the IBM PPC440GX evaluation board.
+
+endmenu
+
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
+	bool
+	select PPC_FPU
+	select IBM440EP_ERR42
+
+config 440GP
+	bool
+	select IBM_NEW_EMAC_ZMII
+
+config 440GX
+	bool
+
+config 440SP
+	bool
+
+config 440A
+	bool
+	depends on 440GX
+	default y
+
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
+	bool
+
+#config XILINX_OCP
+#	bool
+#	depends on XILINX_ML300
+#	default y
+
+#config BIOS_FIXUP
+#	bool
+#	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+#	default y
+
+#config PPC4xx_DMA
+#	bool "PPC4xx DMA controller support"
+#	depends on 4xx
+
+#config PPC4xx_EDMA
+#	bool
+#	depends on !STB03xxx && PPC4xx_DMA
+#	default y
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/40x/Makefile
@@ -0,0 +1 @@
+# empty makefile so make clean works
\ No newline at end of file
--- linux-2.6.orig/arch/powerpc/platforms/4xx/Kconfig
+++ /dev/null
@@ -1,208 +0,0 @@
-config 4xx
-	bool
-	depends on 40x || 44x
-	default y
-
-config BOOKE
-	bool
-	depends on 44x
-	default y
-
-menu "AMCC 40x options"
-	depends on 40x
-
-#config BUBINGA
-#	bool "Bubinga"
-#	depends on 40x
-#	default n
-#	select 405EP
-#	help
-#	  This option enables support for the IBM 405EP evaluation board.
-
-#config CPCI405
-#	bool "CPCI405"
-#	depends on 40x
-#	default n
-#	select 405GP
-#	help
-#	  This option enables support for the CPCI405 board.
-
-#config EP405
-#	bool "EP405/EP405PC"
-#	depends on 40x
-#	default n
-#	select 405GP
-#	help
-#	  This option enables support for the EP405/EP405PC boards.
-
-#config EP405PC
-#	bool "EP405PC Support"
-#	depends on EP405
-#	default y
-#	help
-#	  This option enables support for the extra features of the EP405PC board.
-
-#config REDWOOD_5
-#	bool "Redwood-5"
-#	depends on 40x
-#	default n
-#	select STB03xxx
-#	help
-#	  This option enables support for the IBM STB04 evaluation board.
-
-#config REDWOOD_6
-#	bool "Redwood-6"
-#	depends on 40x
-#	default n
-#	select STB03xxx
-#	help
-#	  This option enables support for the IBM STBx25xx evaluation board.
-
-#config SYCAMORE
-#	bool "Sycamore"
-#	depends on 40x
-#	default n
-#	select 405GPR
-#	help
-#	  This option enables support for the IBM PPC405GPr evaluation board.
-
-#config WALNUT
-#	bool "Walnut"
-#	depends on 40x
-#	default y
-#	select 405GP
-#	help
-#	  This option enables support for the IBM PPC405GP evaluation board.
-
-#config XILINX_ML300
-#	bool "Xilinx-ML300"
-#	depends on 40x
-#	default y
-#	select VIRTEX_II_PRO
-#	help
-#	  This option enables support for the Xilinx ML300 evaluation board.
-
-endmenu
-
-# 40x specific CPU modules, selected based on the board above.
-config NP405H
-	bool
-	#depends on ASH
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	#depends on OAK
-	select IBM405_ERR51
-
-config 405GP
-	bool
-	select IBM405_ERR77
-	select IBM405_ERR51
-
-config 405EP
-	bool
-
-config 405GPR
-	bool
-
-config VIRTEX_II_PRO
-	bool
-	select IBM405_ERR77
-	select IBM405_ERR51
-
-config STB03xxx
-	bool
-	select IBM405_ERR77
-	select IBM405_ERR51
-
-# 40x errata/workaround config symbols, selected by the CPU models above
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
-	bool
-
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
-	bool
-
-menu "AMCC 44x options"
-	depends on 44x
-
-#config BAMBOO
-#	bool "Bamboo"
-#	depends on 44x
-#	default n
-#	select 440EP
-#	help
-#	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	depends on 44x
-	default y
-	select 440GP
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-#config LUAN
-#	bool "Luan"
-#	depends on 44x
-#	default n
-#	select 440SP
-#	help
-#	  This option enables support for the IBM PPC440SP evaluation board.
-
-#config OCOTEA
-#	bool "Ocotea"
-#	depends on 44x
-#	default n
-#	select 440GX
-#	help
-#	  This option enables support for the IBM PPC440GX evaluation board.
-
-endmenu
-
-# 44x specific CPU modules, selected based on the board above.
-config 440EP
-	bool
-	select PPC_FPU
-	select IBM440EP_ERR42
-
-config 440GP
-	bool
-	select IBM_NEW_EMAC_ZMII
-
-config 440GX
-	bool
-
-config 440SP
-	bool
-
-config 440A
-	bool
-	depends on 440GX
-	default y
-
-# 44x errata/workaround config symbols, selected by the CPU models above
-config IBM440EP_ERR42
-	bool
-
-#config XILINX_OCP
-#	bool
-#	depends on XILINX_ML300
-#	default y
-
-#config BIOS_FIXUP
-#	bool
-#	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-#	default y
-
-#config PPC4xx_DMA
-#	bool "PPC4xx DMA controller support"
-#	depends on 4xx
-
-#config PPC4xx_EDMA
-#	bool
-#	depends on !STB03xxx && PPC4xx_DMA
-#	default y
--- linux-2.6.orig/arch/powerpc/platforms/4xx/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-# empty makefile so make clean works
\ No newline at end of file

--