From: Christoph Hellwig <hch@lst.de>
To: leubner@adaptec.com, jeff@garzik.org, linux-scsi@vger.kernel.org
Subject: [PATCH 2/7] gdth: split out eisa probing
Date: Sat, 21 Jul 2007 19:01:46 +0200 [thread overview]
Message-ID: <20070721170146.GC4150@lst.de> (raw)
Split eisa probing into it's own helper, and do proper error unwinding.
Protect EISA probind by the proper CONFIG_EISA symbol.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Index: linux-2.6/drivers/scsi/gdth.c
===================================================================
--- linux-2.6.orig/drivers/scsi/gdth.c 2007-07-21 12:16:55.000000000 +0200
+++ linux-2.6/drivers/scsi/gdth.c 2007-07-21 12:17:57.000000000 +0200
@@ -479,6 +479,9 @@ static void gdth_scsi_done(struct scsi_c
#ifdef CONFIG_ISA
static int gdth_isa_probe_one(struct scsi_host_template *, ulong32);
#endif
+#ifdef CONFIG_EISA
+static int gdth_eisa_probe_one(struct scsi_host_template *, ushort);
+#endif
#ifdef DEBUG_GDTH
static unchar DebugState = DEBUG_GDTH;
@@ -4335,129 +4338,14 @@ static int __init gdth_detect(Scsi_Host_
gdth_isa_probe_one(shtp, isa_bios);
}
#endif
-
- for (eisa_slot=0x1000; eisa_slot<=0x8000; eisa_slot+=0x1000) {
- dma_addr_t scratch_dma_handle;
- scratch_dma_handle = 0;
-
- if (gdth_ctr_count >= MAXHA)
- break;
- if (gdth_search_eisa(eisa_slot)) { /* controller found */
- shp = scsi_register(shtp,sizeof(gdth_ext_str));
- if (shp == NULL)
- continue;
-
- ha = HADATA(shp);
- if (!gdth_init_eisa(eisa_slot,ha)) {
- scsi_unregister(shp);
- continue;
- }
- /* controller found and initialized */
- printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
- eisa_slot>>12,ha->irq);
-
- if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
- printk("GDT-EISA: Unable to allocate IRQ\n");
- scsi_unregister(shp);
- continue;
- }
- shp->unchecked_isa_dma = 0;
- shp->irq = ha->irq;
- shp->dma_channel = 0xff;
- hanum = gdth_ctr_count;
- gdth_ctr_tab[gdth_ctr_count++] = shp;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
-
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum= 0;
- TRACE2(("EISA detect Bus 0: hanum %d\n",
- NUMDATA(shp)->hanum));
-
- ha->pccb = CMDDATA(shp);
- ha->ccb_phys = 0L;
-
- ha->pdev = NULL;
- ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
- &scratch_dma_handle);
- ha->scratch_phys = scratch_dma_handle;
- ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
- &scratch_dma_handle);
- ha->msg_phys = scratch_dma_handle;
-#ifdef INT_COAL
- ha->coal_stat = (gdth_coal_status *)
- pci_alloc_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, &scratch_dma_handle);
- ha->coal_stat_phys = scratch_dma_handle;
-#endif
- ha->ccb_phys =
- pci_map_single(ha->pdev,ha->pccb,
- sizeof(gdth_cmd_str),PCI_DMA_BIDIRECTIONAL);
- ha->scratch_busy = FALSE;
- ha->req_first = NULL;
- ha->tid_cnt = MAX_HDRIVES;
- if (max_ids > 0 && max_ids < ha->tid_cnt)
- ha->tid_cnt = max_ids;
- for (i=0; i<GDTH_MAXCMDS; ++i)
- ha->cmd_tab[i].cmnd = UNUSED_CMND;
- ha->scan_mode = rescan ? 0x10 : 0;
-
- if (ha->pscratch == NULL || ha->pmsg == NULL ||
- !gdth_search_drives(hanum)) {
- printk("GDT-EISA: Error during device scan\n");
- --gdth_ctr_count;
- --gdth_ctr_vcount;
-#ifdef INT_COAL
- if (ha->coal_stat)
- pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, ha->coal_stat,
- ha->coal_stat_phys);
-#endif
- if (ha->pscratch)
- pci_free_consistent(ha->pdev, GDTH_SCRATCH,
- ha->pscratch, ha->scratch_phys);
- if (ha->pmsg)
- pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
- ha->pmsg, ha->msg_phys);
- if (ha->ccb_phys)
- pci_unmap_single(ha->pdev,ha->ccb_phys,
- sizeof(gdth_cmd_str),PCI_DMA_BIDIRECTIONAL);
- free_irq(ha->irq,ha);
- scsi_unregister(shp);
- continue;
- }
- if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
- hdr_channel = ha->bus_cnt;
- ha->virt_bus = hdr_channel;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) && \
- LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- shp->highmem_io = 0;
-#endif
- if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
- shp->max_cmd_len = 16;
-
- shp->max_id = ha->tid_cnt;
- shp->max_lun = MAXLUN;
- shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
- if (virt_ctr) {
- virt_ctr = 1;
- /* register addit. SCSI channels as virtual controllers */
- for (b = 1; b < ha->bus_cnt + 1; ++b) {
- shp = scsi_register(shtp,sizeof(gdth_num_str));
- shp->unchecked_isa_dma = 0;
- shp->irq = ha->irq;
- shp->dma_channel = 0xff;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum = b;
- }
- }
-
- spin_lock_init(&ha->smp_lock);
- gdth_enable_int(hanum);
- }
- }
+#ifdef CONFIG_EISA
+ for (eisa_slot = 0x1000; eisa_slot <= 0x8000; eisa_slot += 0x1000) {
+ if (gdth_ctr_count >= MAXHA)
+ break;
+ gdth_eisa_probe_one(shtp, eisa_slot);
+ }
}
+#endif
/* scanning for PCI controllers */
cnt = gdth_search_pci(pcistr);
@@ -5695,6 +5583,148 @@ static int gdth_isa_probe_one(struct scs
}
#endif /* CONFIG_ISA */
+#ifdef CONFIG_EISA
+static int gdth_eisa_probe_one(struct scsi_host_template *shtp,
+ ushort eisa_slot)
+{
+ struct Scsi_Host *shp;
+ gdth_ha_str *ha;
+ dma_addr_t scratch_dma_handle = 0;
+ int error, hanum, i;
+ u8 b;
+
+ if (!gdth_search_eisa(eisa_slot))
+ return -ENXIO;
+
+ shp = scsi_register(shtp,sizeof(gdth_ext_str));
+ if (!shp)
+ return -ENOMEM;
+ ha = HADATA(shp);
+
+ error = -ENODEV;
+ if (!gdth_init_eisa(eisa_slot,ha))
+ goto out_host_put;
+
+ /* controller found and initialized */
+ printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
+ eisa_slot >> 12, ha->irq);
+
+ error = request_irq(ha->irq, gdth_interrupt, IRQF_DISABLED, "gdth", ha);
+ if (error) {
+ printk("GDT-EISA: Unable to allocate IRQ\n");
+ goto out_host_put;
+ }
+
+ shp->unchecked_isa_dma = 0;
+ shp->irq = ha->irq;
+ shp->dma_channel = 0xff;
+ hanum = gdth_ctr_count;
+ gdth_ctr_tab[gdth_ctr_count++] = shp;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum= 0;
+ TRACE2(("EISA detect Bus 0: hanum %d\n",
+ NUMDATA(shp)->hanum));
+
+ ha->pccb = CMDDATA(shp);
+ ha->ccb_phys = 0L;
+
+ error = -ENOMEM;
+
+ ha->pdev = NULL;
+ ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
+ &scratch_dma_handle);
+ if (!ha->pscratch)
+ goto out_free_irq;
+ ha->scratch_phys = scratch_dma_handle;
+
+ ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
+ &scratch_dma_handle);
+ if (!ha->pmsg)
+ goto out_free_pscratch;
+ ha->msg_phys = scratch_dma_handle;
+
+#ifdef INT_COAL
+ ha->coal_stat = pci_alloc_consistent(ha->pdev,
+ sizeof(gdth_coal_status) * MAXOFFSETS,
+ &scratch_dma_handle);
+ if (!ha->coal_stat)
+ goto out_free_pmsg;
+ ha->coal_stat_phys = scratch_dma_handle;
+#endif
+
+ ha->ccb_phys = pci_map_single(ha->pdev,ha->pccb,
+ sizeof(gdth_cmd_str), PCI_DMA_BIDIRECTIONAL);
+ if (!ha->ccb_phys)
+ goto out_free_coal_stat;
+
+ ha->scratch_busy = FALSE;
+ ha->req_first = NULL;
+ ha->tid_cnt = MAX_HDRIVES;
+ if (max_ids > 0 && max_ids < ha->tid_cnt)
+ ha->tid_cnt = max_ids;
+ for (i = 0; i < GDTH_MAXCMDS; ++i)
+ ha->cmd_tab[i].cmnd = UNUSED_CMND;
+ ha->scan_mode = rescan ? 0x10 : 0;
+
+ if (!gdth_search_drives(hanum)) {
+ printk("GDT-EISA: Error during device scan\n");
+ error = -ENODEV;
+ goto out_free_ccb_phys;
+ }
+
+ if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
+ hdr_channel = ha->bus_cnt;
+ ha->virt_bus = hdr_channel;
+
+ if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
+ shp->max_cmd_len = 16;
+
+ shp->max_id = ha->tid_cnt;
+ shp->max_lun = MAXLUN;
+ shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
+ if (virt_ctr) {
+ virt_ctr = 1;
+ /* register addit. SCSI channels as virtual controllers */
+ for (b = 1; b < ha->bus_cnt + 1; ++b) {
+ shp = scsi_register(shtp,sizeof(gdth_num_str));
+ shp->unchecked_isa_dma = 0;
+ shp->irq = ha->irq;
+ shp->dma_channel = 0xff;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum = b;
+ }
+ }
+
+ spin_lock_init(&ha->smp_lock);
+ gdth_enable_int(hanum);
+ return 0;
+
+ out_free_ccb_phys:
+ pci_unmap_single(ha->pdev,ha->ccb_phys, sizeof(gdth_cmd_str),
+ PCI_DMA_BIDIRECTIONAL);
+ out_free_coal_stat:
+#ifdef INT_COAL
+ pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) * MAXOFFSETS,
+ ha->coal_stat, ha->coal_stat_phys);
+ out_free_pmsg:
+#endif
+ pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
+ ha->pmsg, ha->msg_phys);
+ out_free_pscratch:
+ pci_free_consistent(ha->pdev, GDTH_SCRATCH,
+ ha->pscratch, ha->scratch_phys);
+ out_free_irq:
+ free_irq(ha->irq, ha);
+ gdth_ctr_count--;
+ gdth_ctr_vcount--;
+ out_host_put:
+ scsi_unregister(shp);
+ return error;
+}
+#endif /* CONFIG_EISA */
#include "scsi_module.c"
#ifndef MODULE
reply other threads:[~2007-07-21 17:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070721170146.GC4150@lst.de \
--to=hch@lst.de \
--cc=jeff@garzik.org \
--cc=leubner@adaptec.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.