From: Todd Troxell <xtat@rapidpacket.com>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data
Date: Sat, 21 Jul 2007 17:52:21 -0500 [thread overview]
Message-ID: <20070721225221.GA2092@rapidpacket.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 521 bytes --]
Hello,
I'm connecting latest CVS a2dpd to an Alpine KCA100BT. It connects ok, pin
exchange ok, but when it starts to stream, I get:
A2DPD[16:37:05.324]: pollfd_cb_avrcpfd: socket 13: Connection from
31:98:D1:55:0C:00, mtu=610 accepted at index 0
A2DPD[16:37:06.288]: stream_client_send_pointer_resp: (errno=32:Broken
pipe)Error while sending data^M
A2DPD[16:37:06.288]: disconnect_client:
Full debug log is attached. Let me know if you'd like any further data.
Thanks,
--
Todd Troxell
http://rapidpacket.com/~xtat
[-- Attachment #2: alpine-kca100bt-a2dp.log --]
[-- Type: text/plain, Size: 8199 bytes --]
A2DPD[16:36:52.780]: init_ipc: Selected IPC: unix, addr=127.0.0.1, bcst=127.0.0.255, port=21453
A2DPD[16:36:52.780]: make_daemon_process: a2dpd [Jul 17 2007 23:50:20] starting ...
A2DPD[16:36:52.780]: main: (errno=13:Permission denied)a2dpd addr=00:0C:55:D1:98:31 timer=0 us [Jul 17 2007 23:50:22]
A2DPD[16:36:52.780]: a2dpd_signal_init: Getting on DBUS
A2DPD[16:36:52.784]: a2dpd_signal_init: Installing watch
A2DPD[16:36:52.784]: add_dbus_watch: Added watch 0 0x80b4930 disabled
A2DPD[16:36:52.784]: add_dbus_watch: Added watch 1 0x80b4958 enabled
A2DPD[16:36:52.784]: a2dpd_signal_init: Registering object path: /com/access/a2dpd
A2DPD[16:36:52.784]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
A2DPD[16:36:52.785]: a2dpd_signal_init: OK
A2DPD[16:36:52.785]: a2dpd_signal_init: OK
A2DPD[16:36:52.785]: a2dpd_register_sdp: Start
A2DPD[16:36:52.785]: add_avrtg:
A2DPD[16:36:52.787]: add_a2source:
A2DPD[16:36:52.787]: a2dpd_register_sdp: OK
A2DPD[16:36:52.787]: main_loop:
A2DPD[16:36:52.787]: make_server_socket:
A2DPD[16:36:52.787]: a2dpd_signal_state: Started 00:0C:55:D1:98:31
A2DPD[16:36:52.787]: bta2dpdevicenew:
A2DPD[16:36:52.787]: a2dpd_signal_address_changed: 00:0C:55:D1:98:31
A2DPD[16:36:52.787]: a2dpd_signal_set_socket: Signal socket set to 7
A2DPD[16:36:52.789]: a2dpd_signal_state: Disconnected
A2DPD[16:36:52.789]: a2dp_alloc:
A2DPD[16:36:52.789]: a2dp_alloc: (a2dp = 0x80b8280)
A2DPD[16:36:52.789]: a2dp_new: 00:0C:55:D1:98:31, 44100
A2DPD[16:36:52.789]: a2dp_new: State AVDTP_STATE_DISCONNECTED
A2DPD[16:36:52.789]: alsa_new:
A2DPD[16:36:52.789]: alsa_new: device=plughw:0,0, framerate=44100
A2DPD[16:36:52.789]: alsa_new: State ALSA_STATE_DISCONNECTED
A2DPD[16:36:52.789]: alsa_new: returning 0x80ba418
A2DPD[16:36:52.789]: sco_new:
A2DPD[16:36:52.789]: sco_new: State SCO_STATE_DISCONNECTED
A2DPD[16:36:52.789]: sco_state_disconnect: Filtering state : already disconnected
A2DPD[16:36:52.789]: main_loop: Bluetooth Device Settings [44100 hz, 2 channels, 16 bits]
A2DPD[16:36:52.791]: avrcp_new: Listening for AVRCP on socket 9
A2DPD[16:36:52.791]: avrcp_new: 0x80ba558
A2DPD[16:36:58.900]: a2dp_reset_encoding_buffer:
A2DPD[16:36:58.900]: pollfd_cb_sockfd: Client 10 got index 0
A2DPD[16:36:58.907]: stream_client_state_streamingsetup: PLAYBACK thread client_index=0, socket=10, id=0 started (44100 Hz, 2 channels, 16 bits, ring 65536, threshold 65536)
A2DPD[16:36:59.031]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[16:36:59.031]: a2dp_state_machine: Role is INITIATOR
A2DPD[16:36:59.031]: a2dp_state_machine: (errno=115:Operation now in progress)SDP connection on socket 11
A2DPD[16:36:59.031]: a2dp_state_machine: State AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[16:36:59.031]: a2dpd_signal_state: Connecting 00:0C:55:D1:98:31
A2DPD[16:37:02.728]: a2dp_state_machine: SDP connection terminated
A2DPD[16:37:02.784]: get_avdtp_psm: Parsing results
A2DPD[16:37:02.784]: get_avdtp_psm: Record
A2DPD[16:37:02.784]: get_avdtp_psm: Service Search OK
A2DPD[16:37:02.819]: get_avdtp_psm: Checking non spec audio
A2DPD[16:37:02.819]: a2dp_state_machine: Found psm 25
A2DPD[16:37:02.819]: a2dp_state_machine: State AVDTP_STATEX_CTL_CONNECTING
A2DPD[16:37:02.819]: a2dp_state_machine: Socket is 11
A2DPD[16:37:02.819]: a2dp_state_machine: (errno=115:Operation now in progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT
A2DPD[16:37:03.140]: a2dp_state_machine: State AVDTP_STATE_IDLE
A2DPD[16:37:03.144]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING
A2DPD[16:37:03.144]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING_RESP
A2DPD[16:37:03.288]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_DISCOVER)
A2DPD[16:37:03.288]: a2dp_state_machine: AVDTP_DISCOVER success
A2DPD[16:37:03.288]: a2dp_state_machine: State AVDTP_STATEX_GETTING_CAPABILITIES
A2DPD[16:37:03.288]: a2dp_state_machine: Getting capabilities for SEID=1
A2DPD[16:37:03.288]: a2dp_state_machine: State AVDTP_STATEX_GETTING_CAPABILITIES_RESP
A2DPD[16:37:03.380]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_GET_CAPABILITIES)
A2DPD[16:37:03.380]: a2dp_state_machine: AVDTP_GET_CAPABILITIES success for seid 1
A2DPD[16:37:03.380]: a2dp_state_machine: servcap_cap=1, servcap_len=0,
A2DPD[16:37:03.380]: a2dp_state_machine: cap_type=7, length=6
A2DPD[16:37:03.380]: a2dp_state_machine: media_type=0, codec=0
A2DPD[16:37:03.380]: a2dp_state_machine: A2DPD Prefered bitpool 32
A2DPD[16:37:03.380]: a2dp_state_machine: Device Prefered bitpool 2 -> 60
A2DPD[16:37:03.380]: a2dp_state_machine: A2DPD Selected bitpool 32
A2DPD[16:37:03.380]: a2dp_state_machine: State AVDTP_STATEX_SETTING_CONFIGURATION
A2DPD[16:37:03.380]: a2dp_state_machine: State AVDTP_STATEX_SETTING_CONFIGURATION_RESP
A2DPD[16:37:03.556]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_SET_CONFIGURATION)
A2DPD[16:37:03.556]: a2dp_state_machine: AVDTP_SET_CONFIGURATION success
A2DPD[16:37:03.556]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING
A2DPD[16:37:03.556]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING_RESP
A2DPD[16:37:03.704]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_OPEN)
A2DPD[16:37:03.704]: a2dp_state_machine: AVDTP_OPEN success
A2DPD[16:37:03.704]: a2dp_state_machine: State AVDTP_STATE_CONFIGURED
A2DPD[16:37:03.704]: a2dp_state_machine: State AVDTP_STATEX_STREAM_CONNECTING
A2DPD[16:37:03.708]: a2dp_state_machine: Socket is 12
A2DPD[16:37:03.708]: a2dp_state_machine: (errno=115:Operation now in progress)State AVDTP_STATEX_STREAM_CONNECTING_WAIT
A2DPD[16:37:04.012]: a2dp_state_machine: Stream connected
A2DPD[16:37:04.012]: get_socket_omtu: Socket 12 imtu=672, omtu=895, flush_to=65535
A2DPD[16:37:04.012]: a2dp_state_machine: State AVDTP_STATE_OPEN_START_STREAMING
A2DPD[16:37:04.012]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING
A2DPD[16:37:04.012]: a2dpd_signal_state: Connected 00:0C:55:D1:98:31
A2DPD[16:37:04.013]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING_WAIT
A2DPD[16:37:04.248]: a2dp_handle_avdtp_message: Read non command packet (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_START)
A2DPD[16:37:04.248]: a2dp_state_machine: AVDTP_START success
A2DPD[16:37:04.248]: a2dp_state_machine: State AVDTP_STATE_STREAMING
A2DPD[16:37:04.248]: a2dp_transfer_raw: Samples starting
A2DPD[16:37:05.324]: get_socket_omtu: Socket 9 imtu=672, omtu=0, flush_to=65535
A2DPD[16:37:05.324]: pollfd_cb_avrcpfd: socket 13: Connection from 31:98:D1:55:0C:00, mtu=610 accepted at index 0
A2DPD[16:37:06.288]: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data
A2DPD[16:37:06.288]: disconnect_client:
[ctrl-c]
A2DPD[16:37:09.150]: sigint_handler: handling SIGINT
A2DPD[16:37:09.150]: main_loop: (errno=4:Interrupted system call)Poll ERROR
A2DPD[16:37:09.150]: a2dpd_signal_state: Ended
A2DPD[16:37:09.150]: alsa_destroy:
A2DPD[16:37:09.150]: alsa_state_disconnect: State ALSA_STATE_DISCONNECTED
A2DPD[16:37:09.150]: alsa_destroy: OK
A2DPD[16:37:09.150]: a2dp_destroy: a2dp = 0xbff37ba8
A2DPD[16:37:09.151]: a2dp_free: Disconnecting
A2DPD[16:37:09.151]: a2dp_disconnect:
A2DPD[16:37:09.151]: a2dp_stream_stop: Closing stream socket 12
A2DPD[16:37:09.151]: a2dp_stream_stop: Closed
A2DPD[16:37:09.151]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[16:37:09.151]: a2dp_disconnect: Closing ctl socket 11
A2DPD[16:37:09.151]: a2dp_disconnect: Closed
A2DPD[16:37:09.151]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[16:37:09.151]: a2dp_free: Freeing sbc
A2DPD[16:37:09.151]: a2dp_free: (a2dp = 0x80b8280)
A2DPD[16:37:09.151]: a2dp_free: OK
A2DPD[16:37:09.151]: sco_destroy: sco = 0xbff37bac
A2DPD[16:37:09.151]: sco_free: Disconnecting
A2DPD[16:37:09.151]: sco_free: (sco = 0x80ba528)
A2DPD[16:37:09.151]: avrcp_destroy: Closing socket 13
A2DPD[16:37:09.151]: avrcp_destroy: 0x80ba558
A2DPD[16:37:09.151]: a2dpd_signal_set_socket: Signal socket set to -1
A2DPD[16:37:09.151]: a2dpd_unregister_sdp: Start
A2DPD[16:37:09.152]: a2dpd_unregister_sdp: OK
A2DPD[16:37:09.152]: a2dpd_signal_kill: OK
A2DPD[16:37:09.152]: main: Terminated succesfully
[-- Attachment #3: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #4: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2007-07-21 22:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-21 22:52 Todd Troxell [this message]
2007-07-25 12:22 ` [Bluez-devel] a2dpd: stream_client_send_pointer_resp: (errno=32:Broken pipe)Error while sending data Frederic Dalleau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070721225221.GA2092@rapidpacket.com \
--to=xtat@rapidpacket.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.