All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Bob Ham <rah@bash.sh>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>, linux-ide@vger.kernel.org
Subject: Re: hpt374 sata (Highpoint Rocket 1540)
Date: Tue, 31 Jul 2007 23:32:10 +0200	[thread overview]
Message-ID: <200707312332.10820.bzolnier@gmail.com> (raw)
In-Reply-To: <1185916925.8484.23.camel@orchid.arb.net>


Hi,

On Tuesday 31 July 2007, Bob Ham wrote:
> On Tue, 2007-07-31 at 21:52 +0400, Sergei Shtylyov wrote:
> > Hello, I wrote:
> > 
> > >> I've had a Highpoint Rocket 1540 (not "RocketRAID") SATA controller for
> > >> a while now, using a proprietary binary driver from Highpoint in a linux
> > >> 2.4 kernel.  The chipset is an hpt374.  The hpt366 driver freezes on
> > >> boot, as reported by others.
> > 
> > >    Can we see a bootlog please?
> > 
> >     ... and the output of 'lspci -v' too.
> 
> The machine locks hard when the driver is loaded so I can't give a full
> transcription, but here is the driver's output:
> 
> HPT374: IDE controller at PCI slot 0000:00:0d.0
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16
> HPT374: chipset revision 7
> HPT374: DPLL base: 48 MHz, f_CNT: 141, assuming 33 MHz PCI
> HPT374: using 50 MHz DPLL clock
> HPT374: 100% native mode on irq 16
>     ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA, hdf:pio
>     ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio
> ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 16 (level, low) -> IRQ 16
> HPT374: no clock data saved by BIOS
> HPT374: DPLL base: 48 MHz, f_CNT: 93, assuming 33 MHz PCI
> HPT374: using 50 MHz DPLL clock
>     ide4: BM-DMA at 0xed00-0xed07, BIOS settings: hdi:DMA, hdj:pio
>     ide5: BM-DMA at 0xed08-0xed0f, BIOS settings: hdk:DMA, hdl:pio
> 
> 
> The pata_hpt37x driver is refusing to work as well but it doesn't crash
> the machine.  Here is the relevant error message:
> 
> hpt37x: DPLL did not stabilize.
> pata_hpt37x: BIOS has not set timing clocks.
> hpt37x: DPLL did not stabilize.

Does this patch change anything?

[PATCH] hpt366: always tune PIO

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/hpt366.c		Version 1.10	Jun 29, 2007
+ * linux/drivers/ide/pci/hpt366.c		Version 1.11	Jul 29, 2007
  *
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -1265,10 +1265,10 @@ static void __devinit init_hwif_hpt366(i
 	if (new_mcr != old_mcr)
 		pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
 
-	if (!hwif->dma_base) {
-		hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+	if (hwif->dma_base == 0)
 		return;
-	}
 
 	hwif->ultra_mask = hwif->cds->udma_mask;
 	hwif->mwdma_mask = 0x07;

  reply	other threads:[~2007-07-31 21:41 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-31 11:08 hpt374 sata (Highpoint Rocket 1540) Bob Ham
2007-07-31 12:23 ` Alan Cox
2007-07-31 20:12   ` Bob Ham
2007-07-31 13:29 ` Sergei Shtylyov
2007-07-31 15:35   ` Brad Campbell
2007-07-31 17:52   ` Sergei Shtylyov
2007-07-31 21:22     ` Bob Ham
2007-07-31 21:32       ` Bartlomiej Zolnierkiewicz [this message]
2007-07-31 22:06         ` Bob Ham
2007-08-01 13:40         ` Sergei Shtylyov
2007-08-01 15:52           ` Bob Ham
2007-08-01 15:58             ` Sergei Shtylyov
2007-08-01 17:15               ` Bob Ham
2007-08-01 18:19                 ` Sergei Shtylyov
2007-08-01 22:43                   ` Alan Cox
2007-08-02 12:41                     ` Sergei Shtylyov
2007-08-02 13:12                       ` Alan Cox
2007-08-01 21:03               ` Bob Ham
2007-08-01 21:08                 ` Sergei Shtylyov
2007-08-01 22:42                   ` Alan Cox
2007-08-05 18:10                     ` Sergei Shtylyov
2007-08-01 21:07           ` Bartlomiej Zolnierkiewicz
2007-08-01 21:16             ` Sergei Shtylyov
2007-08-01 21:29               ` Bartlomiej Zolnierkiewicz
2007-08-01 16:14       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200707312332.10820.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=rah@bash.sh \
    --cc=sshtylyov@ru.mvista.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.