From: Mikko Rapeli <mikko.rapeli@iki.fi>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, linux-ide@vger.kernel.org
Subject: Re: ST340823A disk size issue
Date: Thu, 2 Aug 2007 23:03:57 +0300 [thread overview]
Message-ID: <20070802200357.GA1178@nalle> (raw)
In-Reply-To: <200708020117.58916.bzolnier@gmail.com>
On Thu, Aug 02, 2007 at 01:17:58AM +0200, Bartlomiej Zolnierkiewicz wrote:
> Mikko, could you please revert any patches that you have applied, uncomment
> #define DEBUG in ide-disk.c, recompile and note the sectors count in the
>
> "hdd: reading: block=78165360 sectors=..."
>
> debug message?
Full log at http://bugzilla.kernel.org/attachment.cgi?id=12235
Here's a summary:
$ egrep hdd\|ide1\|current\ capacity\|native\ \ capacity
dmesg_ide_debug_26221.txt
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide1...
probing for hdd: present=0, media=32, probetype=ATA
hdd: ST340823A, ATA DISK drive
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hdd: max request size: 128KiB
ide1: start_request: current=0xc18f5c28
hdd: do_special: 0x03
ide1: start_request: current=0xc18f5c28
hdd: do_special: 0x02
ide1: start_request: current=0xc18f5c28
hdd: Host Protected Area detected.
current capacity is 78165360 sectors (40020 MB)
native capacity is 78165361 sectors (40020 MB)
ide1: start_request: current=0xc18f5c28
hdd: Host Protected Area disabled.
hdd: 78165361 sectors (40020 MB) w/1024KiB Cache, CHS=65535/16/63,
UDMA(33)
hdd: cache flushes not supported
hdd:ide1: start_request: current=0xc1e0b578
hdd: reading: block=0, sectors=8, buffer=0xc18b7000
hdd1 hdd2 hdd3
ide1: start_request: current=0xc1e0b578
hdd: reading: block=78165120, sectors=8, buffer=0xc1e54000
ide1: start_request: current=0xc1e0b578
hdd: reading: block=78165352, sectors=1, buffer=0xc1e2e000
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165353, sectors=7, buffer=0xc1e2e200
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
hdd: DMA disabled
ide1: reset: master: error (0x00?)
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x03
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=781
65360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: reset: master: error (0x00?)
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165296
...
next prev parent reply other threads:[~2007-08-02 20:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-01 9:29 ST340823A disk size issue Mikko Rapeli
2007-08-01 13:05 ` Alan Cox
2007-08-02 12:35 ` Mikko Rapeli
2007-08-01 20:34 ` Bartlomiej Zolnierkiewicz
2007-08-01 21:50 ` Mikko Rapeli
2007-08-01 22:19 ` Bartlomiej Zolnierkiewicz
2007-08-01 22:32 ` Alan Cox
2007-08-01 23:17 ` Bartlomiej Zolnierkiewicz
2007-08-02 11:33 ` Alan Cox
2007-08-02 12:27 ` Bartlomiej Zolnierkiewicz
2007-08-02 13:09 ` Alan Cox
2007-08-02 20:03 ` Mikko Rapeli [this message]
2007-08-02 20:42 ` Alan Cox
2007-08-02 22:34 ` Bartlomiej Zolnierkiewicz
2007-08-02 23:11 ` Mikko Rapeli
2007-08-02 23:35 ` Bartlomiej Zolnierkiewicz
2007-08-05 19:06 ` [PATCH] ST340823A, HPA and libata Mikko Rapeli
2007-08-05 19:32 ` Alan Cox
2007-08-08 13:25 ` Alan Cox
2007-08-15 13:56 ` Mikko Rapeli
2007-09-20 21:37 ` Jeff Garzik
2007-08-02 0:33 ` ST340823A disk size issue Bartlomiej Zolnierkiewicz
2007-08-02 12:17 ` Sergei Shtylyov
2007-08-02 12:38 ` Sergei Shtylyov
2007-08-01 22:25 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070802200357.GA1178@nalle \
--to=mikko.rapeli@iki.fi \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.