From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 1/4] ide: fix hidden dependencies on CONFIG_IDE_GENERIC
Date: Thu, 9 Aug 2007 22:12:48 +0200 [thread overview]
Message-ID: <200708092212.49070.bzolnier@gmail.com> (raw)
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their
config options lack explicit dependencies on IDE_GENERIC. In the long-term
these host drivers should be fixed to do the probing themselves but for now
fix them by making their config options select CONFIG_IDE_GENERIC.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
arch/cris/arch-v10/drivers/Kconfig | 1 +
arch/cris/arch-v32/drivers/Kconfig | 1 +
drivers/ide/Kconfig | 9 +++++++++
3 files changed, 11 insertions(+)
Index: b/arch/cris/arch-v10/drivers/Kconfig
===================================================================
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -548,6 +548,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
+ select IDE_GENERIC
help
Enable this to get support for ATA/IDE.
You can't use parallel ports or SCSI ports
Index: b/arch/cris/arch-v32/drivers/Kconfig
===================================================================
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -592,6 +592,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
+ select IDE_GENERIC
help
Enables the ETRAX IDE driver.
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -304,6 +304,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
+ default H8300
help
If unsure, say N.
@@ -352,6 +353,7 @@ config BLK_DEV_CMD640_ENHANCED
config BLK_DEV_IDEPNP
bool "PNP EIDE support"
depends on PNP
+ select IDE_GENERIC
help
If you have a PnP (Plug and Play) compatible EIDE card and
would like the kernel to automatically detect and activate
@@ -858,6 +860,7 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
config IDE_ARM
def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+ select IDE_GENERIC
config BLK_DEV_IDE_ICSIDE
tristate "ICS IDE interface support"
@@ -891,6 +894,7 @@ config BLK_DEV_IDE_BAST
config BLK_DEV_GAYLE
bool "Amiga Gayle IDE interface support"
depends on AMIGA
+ select IDE_GENERIC
help
This is the IDE driver for the Amiga Gayle IDE interface. It supports
both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
@@ -922,6 +926,7 @@ config BLK_DEV_IDEDOUBLER
config BLK_DEV_BUDDHA
bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
+ select IDE_GENERIC
help
This is the IDE driver for the IDE interfaces on the Buddha,
Catweasel and X-Surf expansion boards. It supports up to two interfaces
@@ -934,6 +939,7 @@ config BLK_DEV_BUDDHA
config BLK_DEV_FALCON_IDE
bool "Falcon IDE interface support"
depends on ATARI
+ select IDE_GENERIC
help
This is the IDE driver for the builtin IDE interface on the Atari
Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
@@ -943,6 +949,7 @@ config BLK_DEV_FALCON_IDE
config BLK_DEV_MAC_IDE
bool "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
+ select IDE_GENERIC
help
This is the IDE driver for the builtin IDE interface on some m68k
Macintosh models. It supports both the `Quadra style' (used in
@@ -956,6 +963,7 @@ config BLK_DEV_MAC_IDE
config BLK_DEV_Q40IDE
bool "Q40/Q60 IDE interface support"
depends on Q40
+ select IDE_GENERIC
help
Enable the on-board IDE controller in the Q40/Q60. This should
normally be on; disable it only if you are running a custom hard
@@ -964,6 +972,7 @@ config BLK_DEV_Q40IDE
config BLK_DEV_MPC8xx_IDE
bool "MPC8xx IDE support"
depends on 8xx && IDE=y && BLK_DEV_IDE=y
+ select IDE_GENERIC
help
This option provides support for IDE on Motorola MPC8xx Systems.
Please see 'Type of MPC8xx IDE interface' for details.
reply other threads:[~2007-08-09 20:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200708092212.49070.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.