From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 10 Aug 2007 14:06:54 +0200
Subject: [U-Boot-Users] What to do for adding NAND Support in Uboot-1.1.4
In-Reply-To: <012c01c7db45$92f0cef0$400dc70a@dlh.st.com>
References: <012c01c7db45$92f0cef0$400dc70a@dlh.st.com>
Message-ID: <200708101406.54538.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Subhash,

On Friday 10 August 2007, Subhash JADAVANI wrote:
> I need to add NAND flash support in Uboot-1.1.4.
> Please let me know is there any framework ready for the same or not?
>
> If complete support for the NAND in Uboot's newer versions than
> Uboot-1.1.4, can let me know.

Yes, please use latest the U-Boot version from the GIT repository. It has NAND 
support included.

> Also I need bad block handling for NAND flash in Uboot. If same is handled
> in Uboot then please guide me.

And of course bad block handling too. Without it NAND support would not make 
much sense. Just take a look at some of the boards that already work with 
NAND support.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================