All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Siewior <cbe-oss-dev@ml.breakpoint.cc>
To: cbe-oss-dev@ozlabs.org
Cc: <herbert@gondor.apana.org.au>, <arnd@arndb.de>, <jk@ozlabs.org>,
	linux-crypto@vger.kernel.org,
	Sebastian Siewior <sebastian@breakpoint.cc>
Subject: [patch 10/10] cryptoapi: async speed test
Date: Thu, 16 Aug 2007 22:01:15 +0200	[thread overview]
Message-ID: <20070816200138.277096000@ml.breakpoint.cc> (raw)
In-Reply-To: 20070816200105.735608000@ml.breakpoint.cc

[-- Attachment #1: limi_speed_async.diff --]
[-- Type: text/plain, Size: 6087 bytes --]

This was used to test the async AES algo. trcypt is working as well but does
enqueue that much :-)

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -468,6 +468,12 @@ config CRYPTO_TEST
 	help
 	  Quick & dirty crypto test module.
 
+config CRYPTO_LIMI_SPEED_ASYNC
+	tristate "Crypto algorithm speed test with msec resolution"
+	help
+	  insmod/modprobe the module, and watch dmesg for results.
+	  Test is for aes only, see modinfo for options
+
 source "drivers/crypto/Kconfig"
 
 endif	# if CRYPTO
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich
 obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
 
 obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+obj-$(CONFIG_CRYPTO_LIMI_SPEED_ASYNC) += limi-speeda.o
 
 #
 # generic algorithms and the async_tx api
--- /dev/null
+++ b/crypto/limi-speeda.c
@@ -0,0 +1,191 @@
+/*
+ * Code derived von crypt/tcrypt.h
+ *
+ * Small speed test with time resolution in msec.
+ * Author: Sebastian Siewior (sebastian _at_ breakpoint.cc)
+ * License: GPL v2
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+#include <linux/jiffies.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+static unsigned int buff_size = 16 * 1024;
+module_param(buff_size, uint, 0444);
+MODULE_PARM_DESC(buff_size, "Buffer allocated by kmalloc()");
+
+static unsigned int keylen = 16;
+module_param(keylen, uint, 0444);
+MODULE_PARM_DESC(keylen, "Length of the key (16,24 or 32 bits");
+
+static unsigned int mode = 0;
+module_param(mode, uint, 0444);
+MODULE_PARM_DESC(mode, "0 -> encryption else decryption");
+
+static unsigned int big_loops = 10;
+module_param(big_loops, uint, 0444);
+MODULE_PARM_DESC(big_loops, "Number of mensurations.");
+
+static unsigned int small_loops = 10000;
+module_param(small_loops, uint, 0444);
+MODULE_PARM_DESC(small_loops, "loops within one mesurement.");
+
+static unsigned int alg = 1;
+module_param(alg, uint, 0444);
+MODULE_PARM_DESC(alg, "0 -> ecb(aes), else -> cbc(aes)");
+
+static atomic_t req_pending;
+
+static void request_complete(struct crypto_async_request *req, int err)
+{
+	wait_queue_head_t *complete_wq = req->data;
+	struct ablkcipher_request *ablk_req = ablkcipher_request_cast(req);
+
+	atomic_dec(&req_pending);
+	ablkcipher_request_free(ablk_req);
+	wake_up_all(complete_wq);
+}
+
+static int __init init(void)
+{
+	struct scatterlist sg[1];
+	unsigned char iv[16];
+	struct crypto_ablkcipher *tfm;
+	static char *in;
+	unsigned int i;
+	unsigned int ret;
+	unsigned long start, end;
+	unsigned long total = 0;
+	unsigned long size_kb;
+	unsigned char key[32] = { 1, 2, 3, 4, 5, 6 };
+	const unsigned char *algname;
+	struct ablkcipher_request *ablk_req = NULL;
+	wait_queue_head_t complete_wq;
+	DEFINE_WAIT(wait_for_request);
+
+	algname = alg ? "cbc(aes)" : "ecb(aes)";
+	printk("Limi-speed: %s buff_size: %u, keylen: %d, mode: %s\n", algname, buff_size, keylen,
+			mode ? "decryption" : "encryption");
+	printk("loops: %d, iterations: %d, ", big_loops, small_loops);
+	size_kb = small_loops * buff_size / 1024;
+	printk("=> %lu kb or %lu mb a loop\n", size_kb, size_kb/1024);
+
+	if (keylen != 16 && keylen != 24 && keylen != 32) {
+		printk("Invalid keysize\n");
+		return -EINVAL;
+	}
+
+	in = kmalloc(buff_size, GFP_KERNEL);
+	if (in == NULL) {
+		printk("Failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+	printk("'Alloc' in %d @%p\n", buff_size, in);
+	memset(in, 0x24, buff_size);
+	sg_set_buf(sg, in, buff_size);
+
+	tfm = crypto_alloc_ablkcipher(algname, 0, 0 /* CRYPTO_ALG_ASYNC */);
+
+	if (IS_ERR(tfm)) {
+		printk("failed to load transform for %s: %ld\n", algname, PTR_ERR(tfm));
+		goto leave;
+	}
+
+	ret = crypto_ablkcipher_setkey(tfm, key, keylen);
+	if (ret) {
+		printk("setkey() failed\n");
+		goto out_tfm;
+	}
+
+	init_waitqueue_head(&complete_wq);
+	atomic_set(&req_pending, 0);
+
+	for (i=0 ; i<big_loops; i++) {
+		int j;
+		ret = 0;
+		start = jiffies;
+
+		for (j=0; j < small_loops; j++) {
+			while (1) {
+
+				prepare_to_wait(&complete_wq, &wait_for_request, TASK_INTERRUPTIBLE);
+				ablk_req = ablkcipher_request_alloc(tfm, GFP_KERNEL);
+				if (likely(ablk_req))
+					break;
+				printk("ablkcipher_request_alloc() failed\n");
+				schedule();
+			}
+			atomic_inc(&req_pending);
+
+			ablkcipher_request_set_callback(ablk_req, CRYPTO_TFM_REQ_MAY_BACKLOG, request_complete, &complete_wq);
+			ablkcipher_request_set_crypt(ablk_req, sg, sg, buff_size, &iv);
+
+			if (!mode)
+				ret = crypto_ablkcipher_encrypt(ablk_req);
+			else
+				ret = crypto_ablkcipher_decrypt(ablk_req);
+
+			if (unlikely(ret == -EBUSY)) {
+				schedule();
+
+			} else if (unlikely(ret == 0)) {
+				printk("Process in SYNC mode, this is not cool\n");
+				ablkcipher_request_free(ablk_req);
+				goto out_tfm;
+			} else if (unlikely(ret != -EINPROGRESS)) {
+				printk("encryption failed: %d after (i,j) (%u,%u) iterations\n", ret, i, j);
+				ablkcipher_request_free(ablk_req);
+				goto out_tfm;
+			}
+
+			if (signal_pending(current)) {
+				printk("signal catched\n");
+				break;
+			}
+
+		}
+
+		while (1) {
+//clean_up_exit:
+			prepare_to_wait(&complete_wq, &wait_for_request, TASK_INTERRUPTIBLE);
+			if (atomic_read(&req_pending) == 0)
+				break;
+			schedule();
+		}
+
+		end = jiffies;
+		finish_wait(&complete_wq, &wait_for_request);
+
+		if ( !time_after(start, end)) {
+			printk("Run: %u msec\n", jiffies_to_msecs(end - start));
+			total += jiffies_to_msecs(end - start);
+		} else {
+			printk("Run: %u msec\n", jiffies_to_msecs(start - end));
+			total += jiffies_to_msecs(start - end);
+		}
+		if (signal_pending(current))
+			break;
+	}
+
+	total /= big_loops;
+	size_kb *= 1000;
+	size_kb /= total;
+	printk("Average: %lu msec, approx. %lu kb/sec || %lu mb/sec  \n", total,
+			size_kb, size_kb/1024);
+out_tfm:
+	crypto_free_ablkcipher(tfm);
+leave:
+	kfree(in);
+	return -ENODEV;
+}
+
+static void __exit fini(void) { }
+
+module_init(init);
+module_exit(fini);
+
+MODULE_LICENSE("GPL");

-- 

      parent reply	other threads:[~2007-08-16 20:05 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-16 20:01 [patch 00/10] KSPU API + AES offloaded to SPU + testing module Sebastian Siewior
2007-08-16 20:01 ` [patch 01/10] t add cast to regain ablkcipher_request from private ctx Sebastian Siewior
2007-08-17  8:55   ` Herbert Xu
2007-08-16 20:01 ` [patch 02/10] crypto: retrieve private ctx aligned Sebastian Siewior
2007-08-16 20:01 ` [patch 03/10] spufs: kspu documentation Sebastian Siewior
2007-08-16 20:01 ` [patch 04/10] spufs: kspu doc skeleton Sebastian Siewior
2007-08-16 20:01 ` [patch 05/10] spufs: kspu add required declarations Sebastian Siewior
2007-08-16 20:01 ` [patch 06/10] spufs: add kspu_alloc_context() Sebastian Siewior
2007-08-16 20:01 ` [patch 07/10] spufs: add kernel support for spu task Sebastian Siewior
2007-08-18 16:48   ` Arnd Bergmann
2007-08-16 20:01 ` [patch 08/10] spufs: SPE side implementation of kspu Sebastian Siewior
2007-08-16 20:01 ` [patch 09/10] spufs: SPU-AES support (kernel side) Sebastian Siewior
     [not found]   ` <20070828154637.GA21007@Chamillionaire.breakpoint.cc>
2007-08-29  7:15     ` [patch 1/1] spufs: SPU-AES support (kspu+ablkcipher user) Herbert Xu
2007-08-29  9:28       ` Sebastian Siewior
     [not found]     ` <18132.43463.753224.982580@cargo.ozlabs.ibm.com>
2007-08-29  9:09       ` [Cbe-oss-dev] " Sebastian Siewior
2007-08-16 20:01 ` Sebastian Siewior [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070816200138.277096000@ml.breakpoint.cc \
    --to=cbe-oss-dev@ml.breakpoint.cc \
    --cc=arnd@arndb.de \
    --cc=cbe-oss-dev@ozlabs.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=jk@ozlabs.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=sebastian@breakpoint.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.