All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
To: akpm@linux-foundation.org, linux-kernel@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>,
	Christoph Hellwig <hch@infradead.org>
Subject: [patch 6/8] Immediate Values - Powerpc Optimization
Date: Mon, 20 Aug 2007 16:24:01 -0400	[thread overview]
Message-ID: <20070820202538.765121428@polymtl.ca> (raw)
In-Reply-To: 20070820202355.684760993@polymtl.ca

[-- Attachment #1: immediate-values-powerpc-optimization.patch --]
[-- Type: text/plain, Size: 8389 bytes --]

PowerPC optimization of the immediate values which uses a li instruction,
patched with an immediate value.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Christoph Hellwig <hch@infradead.org>
---
 arch/powerpc/kernel/Makefile    |    1 
 arch/powerpc/kernel/immediate.c |  103 ++++++++++++++++++++++++++++++++
 include/asm-powerpc/immediate.h |  127 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 231 insertions(+)

Index: linux-2.6-lttng/include/asm-powerpc/immediate.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-lttng/include/asm-powerpc/immediate.h	2007-08-07 13:33:13.000000000 -0400
@@ -0,0 +1,127 @@
+#ifndef _ASM_POWERPC_IMMEDIATE_H
+#define _ASM_POWERPC_IMMEDIATE_H
+
+/*
+ * Immediate values. PowerPC architecture optimizations.
+ *
+ * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#include <asm/asm-compat.h>
+
+struct module;
+
+struct __immediate {
+	long var;		/* Identifier variable of the immediate value */
+	long immediate;		/*
+				 * Pointer to the memory location that holds
+				 * the immediate value within the load immediate
+				 * instruction.
+				 */
+	long size;		/* Type size. */
+};
+
+/**
+ * immediate_read - read immediate variable
+ * @var: pointer of type immediate_*_t
+ *
+ * Reads the value of @var.
+ * Optimized version of the immediate.
+ * Do not use in __init and __exit functions. Use _immediate_read() instead.
+ * Makes sure the 2 bytes update will be atomic by aligning the immediate
+ * value. Use a normal memory read for the 4 bytes immediate because there is no
+ * way to atomically update it without using a seqlock read side, which would
+ * cost more in term of total i-cache and d-cache space than a simple memory
+ * read.
+ */
+#define immediate_read(var)						\
+	({								\
+		__typeof__((var)->value) value;				\
+		switch (sizeof(value)) {				\
+		case 1:							\
+			asm (	".section __immediate, \"a\", @progbits;\n\t" \
+					PPC_LONG "%1, ((0f)+3), 1;\n\t"	\
+					".previous;\n\t"		\
+					"0:\n\t"			\
+					"li %0,%2;\n\t"			\
+				: "=r" (value)				\
+				: "i" (&(var)->value),			\
+				  "i" (0));				\
+			break;						\
+		case 2:							\
+			asm (	".section __immediate, \"a\", @progbits;\n\t" \
+					PPC_LONG "%1, ((0f)+2), 2;\n\t"	\
+					".previous;\n\t"		\
+					".align 2\n\t"			\
+					"0:\n\t"			\
+					"li %0,%2;\n\t"			\
+				: "=r" (value)				\
+				: "i" (&(var)->value),			\
+				  "i" (0));				\
+			break;						\
+		default:						\
+			value = (var)->value;				\
+			break;						\
+		};							\
+		value;							\
+	})
+
+/**
+ * immediate_set - set immediate variable (with locking)
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var, taking the module_mutex if required by
+ * the architecture.
+ */
+#define immediate_set(var, i) \
+	(var)->value = (i); \
+	immediate_update(1);
+
+/**
+ * _immediate_set - set immediate variable (without locking)
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var. Must be called with module_mutex held.
+ */
+#define _immediate_set(var, i) \
+	(var)->value = (i); \
+	immediate_update(0);
+
+/**
+ * immediate_set_early - set immediate variable at early boot
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var. Should be used for early boot updates.
+ */
+#define immediate_set_early(var, i) \
+	(var)->value = (i); \
+	immediate_update_early();
+
+/**
+ * immediate_if - if () statement depending on an immediate value
+ * @var: pointer of type immediate_*_t
+ *
+ * Use as an if () statement depending on an immediate value.
+ * Do not use in __init and __exit functions. Use _immediate_if() instead.
+ * Branch depending on an immediate value. Could eventually be optimized further
+ * by improving gcc to give the ability to patch a jump instruction instead of
+ * the value it depends on.
+ */
+#define immediate_if(var)	if (unlikely(immediate_read(var)))
+
+/*
+ * Internal update functions.
+ */
+extern void immediate_update(int lock);
+extern void module_immediate_setup(struct module *mod);
+extern void immediate_update_early(void);
+extern int arch_immediate_update(const struct __immediate *immediate);
+extern void arch_immediate_update_early(const struct __immediate *immediate);
+
+#endif /* _ASM_POWERPC_IMMEDIATE_H */
Index: linux-2.6-lttng/arch/powerpc/kernel/Makefile
===================================================================
--- linux-2.6-lttng.orig/arch/powerpc/kernel/Makefile	2007-08-07 13:32:35.000000000 -0400
+++ linux-2.6-lttng/arch/powerpc/kernel/Makefile	2007-08-07 13:32:53.000000000 -0400
@@ -103,3 +103,4 @@ obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
+obj-$(CONFIG_IMMEDIATE)		+= immediate.o
Index: linux-2.6-lttng/arch/powerpc/kernel/immediate.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-lttng/arch/powerpc/kernel/immediate.c	2007-08-07 13:33:20.000000000 -0400
@@ -0,0 +1,103 @@
+/*
+ * Powerpc optimized immediate values enabling/disabling.
+ *
+ * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ */
+
+#include <linux/module.h>
+#include <linux/immediate.h>
+#include <linux/string.h>
+#include <linux/kprobes.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+#define LI_OPCODE_LEN	2
+
+/**
+ * arch_immediate_update - update one immediate value
+ * @immediate: pointer of type const struct __immediate to update
+ *
+ * Update one immediate value. Must be called with immediate_mutex held.
+ */
+int arch_immediate_update(const struct __immediate *immediate)
+{
+#ifdef CONFIG_KPROBES
+	kprobe_opcode_t *insn;
+	/*
+	 * Fail if a kprobe has been set on this instruction.
+	 * (TODO: we could eventually do better and modify all the (possibly
+	 * nested) kprobes for this site if kprobes had an API for this.
+	 */
+	switch (immediate->size) {
+		case 1:	/* The uint8_t points to the 3rd byte of the
+			 * instruction */
+			insn = (void*)(immediate->immediate - 1 - LI_OPCODE_LEN);
+			break;
+		case 2:	insn = (void*)(immediate->immediate - LI_OPCODE_LEN);
+			break;
+		default:
+		return -EINVAL;
+	}
+
+	if (unlikely(*insn == BREAKPOINT_INSTRUCTION)) {
+		printk(KERN_WARNING "Immediate value in conflict with kprobe. "
+				    "Variable at %p, "
+				    "instruction at %p, size %lu\n",
+				    (void*)immediate->immediate,
+				    (void*)immediate->var, immediate->size);
+		return -EBUSY;
+	}
+#endif
+
+	/*
+	 * If the variable and the instruction have the same value, there is
+	 * nothing to do.
+	 */
+	switch (immediate->size) {
+		case 1:	if (*(uint8_t*)immediate->immediate
+					== *(uint8_t*)immediate->var)
+				return 0;
+			break;
+		case 2:	if (*(uint16_t*)immediate->immediate
+					== *(uint16_t*)immediate->var)
+				return 0;
+			break;
+		default:return -EINVAL;
+	}
+	memcpy((void*)immediate->immediate, (void*)immediate->var,
+			immediate->size);
+	flush_icache_range((unsigned long)immediate->immediate,
+				immediate->size);
+	return 0;
+}
+
+/**
+ * arch_immediate_update_early - update one immediate value at boot time
+ * @immediate: pointer of type const struct __immediate to update
+ *
+ * Update one immediate value at boot time.
+ * We can use flush_icache_range, since the cpu identification has been done in
+ * the early_init stage.
+ */
+void __init arch_immediate_update_early(const struct __immediate *immediate)
+{
+	/*
+	 * If the variable and the instruction have the same value, there is
+	 * nothing to do.
+	 */
+	switch (immediate->size) {
+		case 1:	if (*(uint8_t*)immediate->immediate
+					== *(uint8_t*)immediate->var)
+				return;
+			break;
+		case 2:	if (*(uint16_t*)immediate->immediate
+					== *(uint16_t*)immediate->var)
+				return;
+			break;
+		default:return;
+	}
+	memcpy((void*)immediate->immediate, (void*)immediate->var,
+			immediate->size);
+	flush_icache_range((unsigned long)immediate->immediate,
+				immediate->size);
+}

-- 
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

  parent reply	other threads:[~2007-08-20 20:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-20 20:23 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-20 20:23 ` [patch 1/8] Immediate Values - Global Modules List and Module Mutex Mathieu Desnoyers
2007-08-20 20:23 ` [patch 2/8] Immediate Values - Architecture Independent Code Mathieu Desnoyers
2007-08-20 20:23 ` [patch 3/8] Immediate Values - Kconfig menu in EMBEDDED Mathieu Desnoyers
2007-08-20 20:23 ` [patch 4/8] Immediate Values - Move Kprobes i386 restore_interrupt to kdebug.h Mathieu Desnoyers
2007-08-20 20:24 ` [patch 5/8] Immediate Values - i386 Optimization Mathieu Desnoyers
2007-08-20 20:24 ` Mathieu Desnoyers [this message]
2007-08-28 20:40   ` [PATCH] Immediate Values - Powerpc Optimization Fix Mathieu Desnoyers
2007-08-28 20:42     ` Christoph Hellwig
2007-08-20 20:24 ` [patch 7/8] Immediate Values - Documentation Mathieu Desnoyers
2007-08-20 20:24 ` [patch 8/8] Scheduler Profiling - Use Immediate Values Mathieu Desnoyers
  -- strict thread matches above, loose matches on Subject: below --
2007-11-13 18:58 [patch 0/8] Immediate Values (now with merged x86 support) Mathieu Desnoyers
2007-11-13 18:58 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-09-06 20:02 [patch 0/8] Immediate Values for 2.6.23-rc4-mm1 Mathieu Desnoyers
2007-09-06 20:02 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-08-27 15:59 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-27 15:59 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-08-12 15:07 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-12 15:07 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070820202538.765121428@polymtl.ca \
    --to=mathieu.desnoyers@polymtl.ca \
    --cc=akpm@linux-foundation.org \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.