From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarxik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 2/3] sky2: only bring up watchdog if link is active
Date: Tue, 21 Aug 2007 14:34:03 -0700 [thread overview]
Message-ID: <20070821213456.627533707@linux-foundation.org> (raw)
In-Reply-To: 20070821213401.543412708@linux-foundation.org
[-- Attachment #1: sky2-timer-power.patch --]
[-- Type: text/plain, Size: 4909 bytes --]
This fixes the extra timer overhead that people were whining about
as a 2.6.23 regression.
Running the watchdog timer all the time is unneeded. Change it
to run only if link is up, and reduce frequency to save power.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
--- a/drivers/net/sky2.c 2007-08-21 09:53:50.000000000 -0700
+++ b/drivers/net/sky2.c 2007-08-21 09:54:15.000000000 -0700
@@ -99,10 +99,6 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-static int idle_timeout = 100;
-module_param(idle_timeout, int, 0);
-MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
-
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
@@ -1624,6 +1620,9 @@ static int sky2_down(struct net_device *
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+ if (netif_carrier_ok(dev) && --hw->active == 0)
+ del_timer(&hw->watchdog_timer);
+
/* Stop more packets from being queued */
netif_stop_queue(dev);
@@ -1744,6 +1743,10 @@ static void sky2_link_up(struct sky2_por
netif_carrier_on(sky2->netdev);
+ if (hw->active++ == 0)
+ mod_timer(&hw->watchdog_timer, jiffies + 1);
+
+
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
@@ -1795,6 +1798,11 @@ static void sky2_link_down(struct sky2_p
netif_carrier_off(sky2->netdev);
+ /* Stop watchdog if both ports are not active */
+ if (--hw->active == 0)
+ del_timer(&hw->watchdog_timer);
+
+
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
@@ -2426,25 +2434,20 @@ static void sky2_le_error(struct sky2_hw
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
}
-/* If idle then force a fake soft NAPI poll once a second
- * to work around cases where sharing an edge triggered interrupt.
- */
-static inline void sky2_idle_start(struct sky2_hw *hw)
-{
- if (idle_timeout > 0)
- mod_timer(&hw->idle_timer,
- jiffies + msecs_to_jiffies(idle_timeout));
-}
-
-static void sky2_idle(unsigned long arg)
+/* Check for lost IRQ once a second */
+static void sky2_watchdog(unsigned long arg)
{
struct sky2_hw *hw = (struct sky2_hw *) arg;
- struct net_device *dev = hw->dev[0];
- if (__netif_rx_schedule_prep(dev))
- __netif_rx_schedule(dev);
+ if (sky2_read32(hw, B0_ISRC)) {
+ struct net_device *dev = hw->dev[0];
+
+ if (__netif_rx_schedule_prep(dev))
+ __netif_rx_schedule(dev);
+ }
- mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
+ if (hw->active > 0)
+ mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
}
/* Hardware/software error handling */
@@ -2732,8 +2735,6 @@ static void sky2_restart(struct work_str
struct net_device *dev;
int i, err;
- del_timer_sync(&hw->idle_timer);
-
rtnl_lock();
sky2_write32(hw, B0_IMSK, 0);
sky2_read32(hw, B0_IMSK);
@@ -2762,8 +2763,6 @@ static void sky2_restart(struct work_str
}
}
- sky2_idle_start(hw);
-
rtnl_unlock();
}
@@ -4030,11 +4029,9 @@ static int __devinit sky2_probe(struct p
sky2_show_addr(dev1);
}
- setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+ setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
INIT_WORK(&hw->restart_work, sky2_restart);
- sky2_idle_start(hw);
-
pci_set_drvdata(pdev, hw);
return 0;
@@ -4069,7 +4066,7 @@ static void __devexit sky2_remove(struct
if (!hw)
return;
- del_timer_sync(&hw->idle_timer);
+ del_timer_sync(&hw->watchdog_timer);
flush_scheduled_work();
@@ -4113,7 +4110,6 @@ static int sky2_suspend(struct pci_dev *
if (!hw)
return 0;
- del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
for (i = 0; i < hw->ports; i++) {
@@ -4179,7 +4175,7 @@ static int sky2_resume(struct pci_dev *p
}
netif_poll_enable(hw->dev[0]);
- sky2_idle_start(hw);
+
return 0;
out:
dev_err(&pdev->dev, "resume failed (%d)\n", err);
@@ -4196,7 +4192,6 @@ static void sky2_shutdown(struct pci_dev
if (!hw)
return;
- del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
for (i = 0; i < hw->ports; i++) {
--- a/drivers/net/sky2.h 2007-08-20 16:32:28.000000000 -0700
+++ b/drivers/net/sky2.h 2007-08-21 09:53:53.000000000 -0700
@@ -2045,12 +2045,13 @@ struct sky2_hw {
u8 chip_rev;
u8 pmd_type;
u8 ports;
+ u8 active;
struct sky2_status_le *st_le;
u32 st_idx;
dma_addr_t st_dma;
- struct timer_list idle_timer;
+ struct timer_list watchdog_timer;
struct work_struct restart_work;
int msi;
wait_queue_head_t msi_wait;
--
Stephen Hemminger <shemminger@linux-foundation.org>
next prev parent reply other threads:[~2007-08-21 21:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-21 21:34 [PATCH 0/3] sky2 update for 2.6.23 Stephen Hemminger
2007-08-21 21:34 ` [PATCH 1/3] sky2: clear PCI power control reg at startup Stephen Hemminger
2007-08-21 21:34 ` Stephen Hemminger [this message]
2007-08-21 21:34 ` [PATCH 3/3] sky2 1.17 Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070821213456.627533707@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=jgarxik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.