From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934613AbXHWAIm (ORCPT ); Wed, 22 Aug 2007 20:08:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S934374AbXHWAIY (ORCPT ); Wed, 22 Aug 2007 20:08:24 -0400 Received: from canuck.infradead.org ([209.217.80.40]:53562 "EHLO canuck.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933887AbXHWAIV (ORCPT ); Wed, 22 Aug 2007 20:08:21 -0400 Date: Wed, 22 Aug 2007 17:06:44 -0700 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org, Andrew Morton , torvalds@linux-foundation.org, stable@kernel.org Subject: Re: Linux 2.6.22.5 Message-ID: <20070823000644.GB4845@kroah.com> References: <20070823000627.GA4845@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20070823000627.GA4845@kroah.com> User-Agent: Mutt/1.5.16 (2007-06-09) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index af50f9b..026e4e5 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -850,11 +850,6 @@ and is between 256 and 4096 characters. It is defined in the file lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:,irq: - legacy_serial.force [HW,IA-32,X86-64] - Probe for COM ports at legacy addresses even - if PNPBIOS or ACPI should describe them. This - is for working around firmware defects. - llsc*= [IA64] See function print_params() in arch/ia64/sn/kernel/llsc4.c. diff --git a/Makefile b/Makefile index f2a62ee..5d2a660 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 22 -EXTRAVERSION = .4 +EXTRAVERSION = .5 NAME = Holy Dancing Manatees, Batman! # *DOCUMENTATION* diff --git a/arch/i386/Makefile b/arch/i386/Makefile index bd28f9f..541b3ae 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -51,8 +51,8 @@ cflags-y += -maccumulate-outgoing-args CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 06da59f..e9297cb 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -35,7 +35,6 @@ obj-y += sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o -obj-$(CONFIG_SERIAL_8250) += legacy_serial.o obj-$(CONFIG_VM86) += vm86.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o diff --git a/arch/i386/kernel/cpu/perfctr-watchdog.c b/arch/i386/kernel/cpu/perfctr-watchdog.c index 4d26d51..996f6f8 100644 --- a/arch/i386/kernel/cpu/perfctr-watchdog.c +++ b/arch/i386/kernel/cpu/perfctr-watchdog.c @@ -346,7 +346,9 @@ static int setup_p6_watchdog(unsigned nmi_hz) perfctr_msr = MSR_P6_PERFCTR0; evntsel_msr = MSR_P6_EVNTSEL0; - wrmsrl(perfctr_msr, 0UL); + /* KVM doesn't implement this MSR */ + if (wrmsr_safe(perfctr_msr, 0, 0) < 0) + return 0; evntsel = P6_EVNTSEL_INT | P6_EVNTSEL_OS diff --git a/arch/i386/kernel/doublefault.c b/arch/i386/kernel/doublefault.c index 265c559..40978af 100644 --- a/arch/i386/kernel/doublefault.c +++ b/arch/i386/kernel/doublefault.c @@ -13,7 +13,7 @@ static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE]; #define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE) -#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + 0x1000000) +#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM) static void doublefault_fn(void) { @@ -23,23 +23,23 @@ static void doublefault_fn(void) store_gdt(&gdt_desc); gdt = gdt_desc.address; - printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); + printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); if (ptr_ok(gdt)) { gdt += GDT_ENTRY_TSS << 3; tss = *(u16 *)(gdt+2); tss += *(u8 *)(gdt+4) << 16; tss += *(u8 *)(gdt+7) << 24; - printk("double fault, tss at %08lx\n", tss); + printk(KERN_EMERG "double fault, tss at %08lx\n", tss); if (ptr_ok(tss)) { struct i386_hw_tss *t = (struct i386_hw_tss *)tss; - printk("eip = %08lx, esp = %08lx\n", t->eip, t->esp); + printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", t->eip, t->esp); - printk("eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", + printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", t->eax, t->ebx, t->ecx, t->edx); - printk("esi = %08lx, edi = %08lx\n", + printk(KERN_EMERG "esi = %08lx, edi = %08lx\n", t->esi, t->edi); } } @@ -63,6 +63,7 @@ struct tss_struct doublefault_tss __cacheline_aligned = { .cs = __KERNEL_CS, .ss = __KERNEL_DS, .ds = __USER_DS, + .fs = __KERNEL_PERCPU, .__cr3 = __pa(swapper_pg_dir) } diff --git a/arch/i386/kernel/legacy_serial.c b/arch/i386/kernel/legacy_serial.c deleted file mode 100644 index 2151011..0000000 --- a/arch/i386/kernel/legacy_serial.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Legacy COM port devices for x86 platforms without PNPBIOS or ACPI. - * Data taken from include/asm-i386/serial.h. - * - * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. - * Bjorn Helgaas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ) -#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ) -#else -#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) -#define COM4_FLAGS UPF_BOOT_AUTOCONF -#endif - -#define PORT(_base,_irq,_flags) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = _flags, \ - } - -static struct plat_serial8250_port x86_com_data[] = { - PORT(0x3F8, 4, COM_FLAGS), - PORT(0x2F8, 3, COM_FLAGS), - PORT(0x3E8, 4, COM_FLAGS), - PORT(0x2E8, 3, COM4_FLAGS), - { }, -}; - -static struct platform_device x86_com_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = x86_com_data, - }, -}; - -static int force_legacy_probe; -module_param_named(force, force_legacy_probe, bool, 0); -MODULE_PARM_DESC(force, "Force legacy serial port probe"); - -static int __init serial8250_x86_com_init(void) -{ - if (pnp_platform_devices && !force_legacy_probe) - return -ENODEV; - - return platform_device_register(&x86_com_device); -} - -module_init(serial8250_x86_com_init); - -MODULE_AUTHOR("Bjorn Helgaas"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module"); diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index ff4ee6f..6deb159 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -336,7 +336,9 @@ struct vm_area_struct *get_gate_vma(struct task_struct *tsk) int in_gate_area(struct task_struct *task, unsigned long addr) { - return 0; + const struct vm_area_struct *vma = get_gate_vma(task); + + return vma && addr >= vma->vm_start && addr < vma->vm_end; } int in_gate_area_no_task(unsigned long addr) diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 29617ae..fdab077 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -57,8 +57,8 @@ cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) cflags-y += -maccumulate-outgoing-args # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index de1de8a..4d94c51 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary.o tce.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o -obj-$(CONFIG_SERIAL_8250) += legacy_serial.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o obj-$(CONFIG_X86_VSMP) += vsmp.o @@ -50,7 +49,6 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o bootflag-y += ../../i386/kernel/bootflag.o -legacy_serial-y += ../../i386/kernel/legacy_serial.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/kernel/topology.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 1fab487..c63fc64 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -326,8 +326,7 @@ NEXT_PAGE(level2_kernel_pgt) /* 40MB kernel mapping. The kernel code cannot be bigger than that. When you change this change KERNEL_TEXT_SIZE in page.h too. */ /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ - PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, - KERNEL_TEXT_SIZE/PMD_SIZE) + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE) /* Module mapping starts here */ .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c index 902c287..361ebe6 100644 --- a/drivers/acpi/events/evgpeblk.c +++ b/drivers/acpi/events/evgpeblk.c @@ -586,6 +586,10 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt) flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); if (gpe_xrupt->previous) { gpe_xrupt->previous->next = gpe_xrupt->next; + } else { + /* No previous, update list head */ + + acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next; } if (gpe_xrupt->next) { diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 1285e91..002bb33 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -211,14 +211,17 @@ void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags) * DESCRIPTION: Get a local copy of the FADT and convert it to a common format. * Performs validation on some important FADT fields. * + * NOTE: We create a local copy of the FADT regardless of the version. + * ******************************************************************************/ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) { /* - * Check if the FADT is larger than what we know about (ACPI 2.0 version). - * Truncate the table, but make some noise. + * Check if the FADT is larger than the largest table that we expect + * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue + * a warning. */ if (length > sizeof(struct acpi_table_fadt)) { ACPI_WARNING((AE_INFO, @@ -227,10 +230,12 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) sizeof(struct acpi_table_fadt))); } - /* Copy the entire FADT locally. Zero first for tb_convert_fadt */ + /* Clear the entire local FADT */ ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt)); + /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */ + ACPI_MEMCPY(&acpi_gbl_FADT, table, ACPI_MIN(length, sizeof(struct acpi_table_fadt))); @@ -251,7 +256,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) * RETURN: None * * DESCRIPTION: Converts all versions of the FADT to a common internal format. - * -> Expand all 32-bit addresses to 64-bit. + * Expand all 32-bit addresses to 64-bit. * * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), * and must contain a copy of the actual FADT. @@ -292,8 +297,23 @@ static void acpi_tb_convert_fadt(void) } /* - * Expand the 32-bit V1.0 addresses to the 64-bit "X" generic address - * structures as necessary. + * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which + * should be zero are indeed zero. This will workaround BIOSs that + * inadvertently place values in these fields. + * + * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at + * offset 45, 55, 95, and the word located at offset 109, 110. + */ + if (acpi_gbl_FADT.header.revision < 3) { + acpi_gbl_FADT.preferred_profile = 0; + acpi_gbl_FADT.pstate_control = 0; + acpi_gbl_FADT.cst_control = 0; + acpi_gbl_FADT.boot_flags = 0; + } + + /* + * Expand the ACPI 1.0 32-bit V1.0 addresses to the ACPI 2.0 64-bit "X" + * generic address structures as necessary. */ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { target = @@ -349,18 +369,6 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.xpm1a_event_block.space_id; } - - /* - * For ACPI 1.0 FADTs, ensure that reserved fields (which should be zero) - * are indeed zero. This will workaround BIOSs that inadvertently placed - * values in these fields. - */ - if (acpi_gbl_FADT.header.revision < 3) { - acpi_gbl_FADT.preferred_profile = 0; - acpi_gbl_FADT.pstate_control = 0; - acpi_gbl_FADT.cst_control = 0; - acpi_gbl_FADT.boot_flags = 0; - } } /****************************************************************************** diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index ca5229d..3400b3e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -399,7 +399,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ - { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */ + { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */ + { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */ + { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */ /* VIA */ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 1e21c8c..c3e716e 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -585,6 +585,8 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) if ((err = device_create_file(dev, &dev_attr_alarms))) goto error_remove_files; + if ((err = device_create_file(dev, &dev_attr_name))) + goto error_remove_files; data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index f85b48f..c95909c 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -740,9 +740,9 @@ store_sensor(struct device *dev, struct device_attribute *da, static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_sensor, store_sensor, 0); static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, - show_sensor, store_sensor, 0); + show_sensor, store_sensor, 1); static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, - show_sensor, store_sensor, 0); + show_sensor, store_sensor, 2); /* I2C devices get this name attribute automatically, but for ISA devices we must create it by ourselves. */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index a361dba..4a7b5f4 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3067,8 +3067,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data) np->nic_poll_irq = np->irqmask; mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } - printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i); spin_unlock(&np->lock); + printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i); break; } @@ -3185,8 +3185,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data) np->nic_poll_irq = np->irqmask; mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } - printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i); spin_unlock(&np->lock); + printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i); break; } @@ -3232,8 +3232,8 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data) np->nic_poll_irq |= NVREG_IRQ_TX_ALL; mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } - printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i); spin_unlock_irqrestore(&np->lock, flags); + printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i); break; } @@ -3347,8 +3347,8 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data) np->nic_poll_irq |= NVREG_IRQ_RX_ALL; mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } - printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i); spin_unlock_irqrestore(&np->lock, flags); + printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i); break; } } @@ -3420,8 +3420,8 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data) np->nic_poll_irq |= NVREG_IRQ_OTHER; mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } - printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i); spin_unlock_irqrestore(&np->lock, flags); + printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i); break; } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 5ec7752..84958c8 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2649,14 +2649,16 @@ rtl8169_interrupt(int irq, void *dev_instance) rtl8169_check_link_status(dev, tp, ioaddr); #ifdef CONFIG_R8169_NAPI - RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event); - tp->intr_mask = ~rtl8169_napi_event; - - if (likely(netif_rx_schedule_prep(dev))) - __netif_rx_schedule(dev); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x taken in poll\n", - dev->name, status); + if (status & rtl8169_napi_event) { + RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event); + tp->intr_mask = ~rtl8169_napi_event; + + if (likely(netif_rx_schedule_prep(dev))) + __netif_rx_schedule(dev); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); + } } break; #else diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index fe01b96..d2646a8 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -96,7 +96,7 @@ static int disable_msi = 0; module_param(disable_msi, int, 0); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); -static int idle_timeout = 0; +static int idle_timeout = 100; module_param(idle_timeout, int, 0); MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)"); @@ -1234,6 +1234,8 @@ static int sky2_up(struct net_device *dev) if (netif_msg_ifup(sky2)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + netif_carrier_off(dev); + /* must be power of 2 */ sky2->tx_le = pci_alloc_consistent(hw->pdev, TX_RING_SIZE * @@ -1573,7 +1575,6 @@ static int sky2_down(struct net_device *dev) /* Stop more packets from being queued */ netif_stop_queue(dev); - netif_carrier_off(dev); /* Disable port IRQ */ imask = sky2_read32(hw, B0_IMSK); @@ -1625,6 +1626,8 @@ static int sky2_down(struct net_device *dev) sky2_phy_power(hw, port, 0); + netif_carrier_off(dev); + /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); @@ -1689,7 +1692,6 @@ static void sky2_link_up(struct sky2_port *sky2) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); netif_carrier_on(sky2->netdev); - netif_wake_queue(sky2->netdev); /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), @@ -1741,7 +1743,6 @@ static void sky2_link_down(struct sky2_port *sky2) gma_write16(hw, port, GM_GP_CTRL, reg); netif_carrier_off(sky2->netdev); - netif_stop_queue(sky2->netdev); /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); @@ -2064,6 +2065,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (!(status & GMR_FS_RX_OK)) goto resubmit; + if (status >> 16 != length) + goto len_mismatch; + if (length < copybreak) skb = receive_copy(sky2, re, length); else @@ -2073,6 +2077,11 @@ resubmit: return skb; +len_mismatch: + /* Truncation of overlength packets + causes PHY length to not match MAC length */ + ++sky2->net_stats.rx_length_errors; + error: ++sky2->net_stats.rx_errors; if (status & GMR_FS_RX_FF_OV) { @@ -2427,8 +2436,7 @@ static void sky2_err_intr(struct sky2_hw *hw, u32 status) static int sky2_poll(struct net_device *dev0, int *budget) { struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw; - int work_limit = min(dev0->quota, *budget); - int work_done = 0; + int work_done; u32 status = sky2_read32(hw, B0_Y2_SP_EISR); if (unlikely(status & Y2_IS_ERROR)) @@ -2440,18 +2448,25 @@ static int sky2_poll(struct net_device *dev0, int *budget) if (status & Y2_IS_IRQ_PHY2) sky2_phy_intr(hw, 1); - work_done = sky2_status_intr(hw, work_limit); - if (work_done < work_limit) { - netif_rx_complete(dev0); + work_done = sky2_status_intr(hw, min(dev0->quota, *budget)); + *budget -= work_done; + dev0->quota -= work_done; - /* end of interrupt, re-enables also acts as I/O synchronization */ - sky2_read32(hw, B0_Y2_SP_LISR); - return 0; - } else { - *budget -= work_done; - dev0->quota -= work_done; + /* More work? */ + if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX)) return 1; + + /* Bug/Errata workaround? + * Need to kick the TX irq moderation timer. + */ + if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) { + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); } + netif_rx_complete(dev0); + + sky2_read32(hw, B0_Y2_SP_LISR); + return 0; } static irqreturn_t sky2_intr(int irq, void *dev_id) @@ -3486,10 +3501,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - /* device is off until link detection */ - netif_carrier_off(dev); - netif_stop_queue(dev); - return dev; } diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 315ea99..a288de5 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -74,21 +74,17 @@ config SERIAL_8250_PCI depends on SERIAL_8250 && PCI default SERIAL_8250 help - Say Y here if you have PCI serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_pci. + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. config SERIAL_8250_PNP tristate "8250/16550 PNP device support" if EMBEDDED depends on SERIAL_8250 && PNP default SERIAL_8250 help - Say Y here if you have serial ports described by PNPBIOS or ACPI. - These are typically ports built into the system board. - - To compile this driver as a module, choose M here: the module - will be called 8250_pnp. + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. config SERIAL_8250_HP300 tristate diff --git a/fs/jffs2/write.c b/fs/jffs2/write.c index c9fe0ab..1b68a52 100644 --- a/fs/jffs2/write.c +++ b/fs/jffs2/write.c @@ -553,6 +553,9 @@ int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, struct jffs2_full_dirent **prev = &dir_f->dents; uint32_t nhash = full_name_hash(name, namelen); + /* We don't actually want to reserve any space, but we do + want to be holding the alloc_sem when we write to flash */ + down(&c->alloc_sem); down(&dir_f->sem); while ((*prev) && (*prev)->nhash <= nhash) { diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h index b9c2548..7ef3862 100644 --- a/include/asm-avr32/atomic.h +++ b/include/asm-avr32/atomic.h @@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u) " mov %1, 1\n" "1:" : "=&r"(tmp), "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "rKs21"(a), "rKs21"(u) + : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result) : "cc", "memory"); return result; @@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) " mov %1, 1\n" "1:" : "=&r"(tmp), "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "r"(a), "ir"(u) + : "m"(v->counter), "r"(a), "ir"(u), "1"(result) : "cc", "memory"); } diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h index 57a4306..bd67480 100644 --- a/include/asm-i386/serial.h +++ b/include/asm-i386/serial.h @@ -11,3 +11,19 @@ * megabits/second; but this requires the faster clock. */ #define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h index 8ebd765..b0496e0 100644 --- a/include/asm-x86_64/serial.h +++ b/include/asm-x86_64/serial.h @@ -11,3 +11,19 @@ * megabits/second; but this requires the faster clock. */ #define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index a3b7854..a686590 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -709,7 +709,8 @@ static void mark_nosave_pages(struct memory_bitmap *bm) region->end_pfn << PAGE_SHIFT); for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++) - memory_bm_set_bit(bm, pfn); + if (pfn_valid(pfn)) + memory_bm_set_bit(bm, pfn); } }