From: Ursula Braun <braunu@de.ibm.com>
To: linux-s390@vger.kernel.org, linux-netdev@vger.kernel.org
Subject: [patch 6/7] qeth: provide specific message for OSA-adapters exclusively used
Date: Mon, 27 Aug 2007 17:27:37 +0000 [thread overview]
Message-ID: <20070827173102.462675000@linux.vnet.ibm.com> (raw)
From: Ursula Braun <braunu@de.ibm.com>
Exclusive usage of OSA-cards has been introduced. Even though Linux
does not make use of it, qeth should be prepared to receive a bad RC
for some initialization steps. A meaningful message is now given,
if an OSA-device is set online, even though the OSA-adapter is already
exclusively used by another host.
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
---
drivers/s390/net/qeth_main.c | 28 +++++++++++++++++++---------
drivers/s390/net/qeth_mpc.h | 1 +
2 files changed, 20 insertions(+), 9 deletions(-)
Index: linux-2.6-uschi/drivers/s390/net/qeth_main.c
===================================================================
--- linux-2.6-uschi.orig/drivers/s390/net/qeth_main.c
+++ linux-2.6-uschi/drivers/s390/net/qeth_main.c
@@ -1541,16 +1541,21 @@ qeth_idx_write_cb(struct qeth_channel *c
card = CARD_FROM_CDEV(channel->ccwdev);
if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) {
- PRINT_ERR("IDX_ACTIVATE on write channel device %s: negative "
- "reply\n", CARD_WDEV_ID(card));
+ if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19)
+ PRINT_ERR("IDX_ACTIVATE on write channel device %s: "
+ "adapter exclusively used by another host\n",
+ CARD_WDEV_ID(card));
+ else
+ PRINT_ERR("IDX_ACTIVATE on write channel device %s: "
+ "negative reply\n", CARD_WDEV_ID(card));
goto out;
}
memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2);
if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) {
PRINT_WARN("IDX_ACTIVATE on write channel device %s: "
- "function level mismatch "
- "(sent: 0x%x, received: 0x%x)\n",
- CARD_WDEV_ID(card), card->info.func_level, temp);
+ "function level mismatch "
+ "(sent: 0x%x, received: 0x%x)\n",
+ CARD_WDEV_ID(card), card->info.func_level, temp);
goto out;
}
channel->state = CH_STATE_UP;
@@ -1596,8 +1601,13 @@ qeth_idx_read_cb(struct qeth_channel *ch
goto out;
}
if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) {
- PRINT_ERR("IDX_ACTIVATE on read channel device %s: negative "
- "reply\n", CARD_RDEV_ID(card));
+ if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19)
+ PRINT_ERR("IDX_ACTIVATE on read channel device %s: "
+ "adapter exclusively used by another host\n",
+ CARD_RDEV_ID(card));
+ else
+ PRINT_ERR("IDX_ACTIVATE on read channel device %s: "
+ "negative reply\n", CARD_RDEV_ID(card));
goto out;
}
@@ -1612,8 +1622,8 @@ qeth_idx_read_cb(struct qeth_channel *ch
memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2);
if (temp != qeth_peer_func_level(card->info.func_level)) {
PRINT_WARN("IDX_ACTIVATE on read channel device %s: function "
- "level mismatch (sent: 0x%x, received: 0x%x)\n",
- CARD_RDEV_ID(card), card->info.func_level, temp);
+ "level mismatch (sent: 0x%x, received: 0x%x)\n",
+ CARD_RDEV_ID(card), card->info.func_level, temp);
goto out;
}
memcpy(&card->token.issuer_rm_r,
Index: linux-2.6-uschi/drivers/s390/net/qeth_mpc.h
===================================================================
--- linux-2.6-uschi.orig/drivers/s390/net/qeth_mpc.h
+++ linux-2.6-uschi/drivers/s390/net/qeth_mpc.h
@@ -565,6 +565,7 @@ extern unsigned char IDX_ACTIVATE_WRITE[
#define QETH_IDX_ACT_QDIO_DEV_REALADDR(buffer) (buffer+0x20)
#define QETH_IS_IDX_ACT_POS_REPLY(buffer) (((buffer)[0x08]&3)==2)
#define QETH_IDX_REPLY_LEVEL(buffer) (buffer+0x12)
+#define QETH_IDX_ACT_CAUSE_CODE(buffer) (buffer)[0x09]
#define PDU_ENCAPSULATION(buffer) \
(buffer + *(buffer + (*(buffer+0x0b)) + \
--
reply other threads:[~2007-08-27 17:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070827173102.462675000@linux.vnet.ibm.com \
--to=braunu@de.ibm.com \
--cc=linux-netdev@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.