From: Ursula Braun <braunu@de.ibm.com>
To: jgarzik@pobox.com, netdev@vger.kernel.org, linux-s390@vger.kernel.org
Cc: frank.blaschka@de.ibm.com
Subject: [patch 4/7] s390: Announce tx checksumming for qeth devices in TSO/EDDP mode
Date: Wed, 29 Aug 2007 11:26:55 +0200 [thread overview]
Message-ID: <20070829101849.213027000@linux.vnet.ibm.com> (raw)
In-Reply-To: 20070829092651.411517000@linux.vnet.ibm.com
[-- Attachment #1: 706-qeth-tx-chksum.diff --]
[-- Type: text/plain, Size: 5129 bytes --]
From: Frank Blaschka <frank.blaschka@de.ibm.com>
TSO requires tx checksumming. For non GSO frames in TSO/EDDP mode we
have to manually calculate the checksum.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
---
Subject: [patch 4/7] [PATCH] qeth: Announce tx checksumming for qeth devices in TSO/EDDP mode
From: Frank Blaschka <frank.blaschka@de.ibm.com>
TSO requires tx checksumming. For non GSO frames in TSO/EDDP mode we
have to manually calculate the checksum.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
---
drivers/s390/net/qeth_main.c | 82 +++++++++++++++++++++++++++++++++++--------
1 file changed, 68 insertions(+), 14 deletions(-)
Index: linux-2.6-uschi/drivers/s390/net/qeth_main.c
===================================================================
--- linux-2.6-uschi.orig/drivers/s390/net/qeth_main.c
+++ linux-2.6-uschi/drivers/s390/net/qeth_main.c
@@ -4555,6 +4555,53 @@ qeth_get_elements_no(struct qeth_card *c
return elements_needed;
}
+static void qeth_tx_csum(struct sk_buff *skb)
+{
+ int tlen;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ tlen = ntohs(ip_hdr(skb)->tot_len) - (ip_hdr(skb)->ihl << 2);
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ tcp_hdr(skb)->check = 0;
+ tcp_hdr(skb)->check = csum_tcpudp_magic(
+ ip_hdr(skb)->saddr, ip_hdr(skb)->daddr,
+ tlen, ip_hdr(skb)->protocol,
+ skb_checksum(skb, skb_transport_offset(skb),
+ tlen, 0));
+ break;
+ case IPPROTO_UDP:
+ udp_hdr(skb)->check = 0;
+ udp_hdr(skb)->check = csum_tcpudp_magic(
+ ip_hdr(skb)->saddr, ip_hdr(skb)->daddr,
+ tlen, ip_hdr(skb)->protocol,
+ skb_checksum(skb, skb_transport_offset(skb),
+ tlen, 0));
+ break;
+ }
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ switch (ipv6_hdr(skb)->nexthdr) {
+ case IPPROTO_TCP:
+ tcp_hdr(skb)->check = 0;
+ tcp_hdr(skb)->check = csum_ipv6_magic(
+ &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
+ ipv6_hdr(skb)->payload_len,
+ ipv6_hdr(skb)->nexthdr,
+ skb_checksum(skb, skb_transport_offset(skb),
+ ipv6_hdr(skb)->payload_len, 0));
+ break;
+ case IPPROTO_UDP:
+ udp_hdr(skb)->check = 0;
+ udp_hdr(skb)->check = csum_ipv6_magic(
+ &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
+ ipv6_hdr(skb)->payload_len,
+ ipv6_hdr(skb)->nexthdr,
+ skb_checksum(skb, skb_transport_offset(skb),
+ ipv6_hdr(skb)->payload_len, 0));
+ break;
+ }
+ }
+}
static int
qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
@@ -4640,6 +4687,10 @@ qeth_send_packet(struct qeth_card *card,
elements_needed += elems;
}
+ if ((large_send == QETH_LARGE_SEND_NO) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL))
+ qeth_tx_csum(new_skb);
+
if (card->info.type != QETH_CARD_TYPE_IQD)
rc = qeth_do_send_packet(card, queue, new_skb, hdr,
elements_needed, ctx);
@@ -6387,20 +6438,18 @@ qeth_deregister_addr_entry(struct qeth_c
static u32
qeth_ethtool_get_tx_csum(struct net_device *dev)
{
- /* We may need to say that we support tx csum offload if
- * we do EDDP or TSO. There are discussions going on to
- * enforce rules in the stack and in ethtool that make
- * SG and TSO depend on HW_CSUM. At the moment there are
- * no such rules....
- * If we say yes here, we have to checksum outbound packets
- * any time. */
- return 0;
+ return (dev->features & NETIF_F_HW_CSUM) != 0;
}
static int
qeth_ethtool_set_tx_csum(struct net_device *dev, u32 data)
{
- return -EINVAL;
+ if (data)
+ dev->features |= NETIF_F_HW_CSUM;
+ else
+ dev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
}
static u32
@@ -7414,7 +7463,8 @@ qeth_start_ipa_tso(struct qeth_card *car
}
if (rc && (card->options.large_send == QETH_LARGE_SEND_TSO)){
card->options.large_send = QETH_LARGE_SEND_NO;
- card->dev->features &= ~ (NETIF_F_TSO | NETIF_F_SG);
+ card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
+ NETIF_F_HW_CSUM);
}
return rc;
}
@@ -7554,22 +7604,26 @@ qeth_set_large_send(struct qeth_card *ca
card->options.large_send = type;
switch (card->options.large_send) {
case QETH_LARGE_SEND_EDDP:
- card->dev->features |= NETIF_F_TSO | NETIF_F_SG;
+ card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
+ NETIF_F_HW_CSUM;
break;
case QETH_LARGE_SEND_TSO:
if (qeth_is_supported(card, IPA_OUTBOUND_TSO)){
- card->dev->features |= NETIF_F_TSO | NETIF_F_SG;
+ card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
+ NETIF_F_HW_CSUM;
} else {
PRINT_WARN("TSO not supported on %s. "
"large_send set to 'no'.\n",
card->dev->name);
- card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
+ card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
+ NETIF_F_HW_CSUM);
card->options.large_send = QETH_LARGE_SEND_NO;
rc = -EOPNOTSUPP;
}
break;
default: /* includes QETH_LARGE_SEND_NO */
- card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
+ card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
+ NETIF_F_HW_CSUM);
break;
}
if (card->state == CARD_STATE_UP)
--
next prev parent reply other threads:[~2007-08-29 9:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-29 9:26 [patch 0/7] s390 - qeth patches for 2.6.23-rc3 (resend) Ursula Braun
2007-08-29 9:26 ` [patch 1/7] s390: ungrouping a device must not be interruptible Ursula Braun
2007-08-31 10:55 ` Jeff Garzik
2007-08-29 9:26 ` [patch 2/7] s390: enforce a rate limit for inbound scatter gather messages Ursula Braun
2007-08-29 9:26 ` [patch 3/7] s390: dont return the return values of void functions Ursula Braun
2007-08-29 9:26 ` Ursula Braun [this message]
2007-08-29 9:26 ` [patch 5/7] s390: crash during reboot after failing online setting Ursula Braun
2007-08-29 9:26 ` [patch 6/7] s390: provide specific message for OSA-adapters exclusively used Ursula Braun
2007-08-29 9:26 ` [patch 7/7] s390: Drop ARP packages on HiperSockets interface with NOARP attribute Ursula Braun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070829101849.213027000@linux.vnet.ibm.com \
--to=braunu@de.ibm.com \
--cc=frank.blaschka@de.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.