All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Subject: [PATCH 2/10] ide: use I/O ops directly part #2
Date: Wed, 29 Aug 2007 23:18:23 +0200	[thread overview]
Message-ID: <200708292318.23393.bzolnier@gmail.com> (raw)


Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c   |   43 ++++++++++++++++++++-----------------------
 drivers/ide/pci/piix.c     |    4 ++--
 drivers/ide/pci/tc86c001.c |   12 ++++++------
 3 files changed, 28 insertions(+), 31 deletions(-)

Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -658,12 +658,11 @@ static int hpt3xx_quirkproc(ide_drive_t 
 
 static void hpt3xx_intrproc(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = HWIF(drive);
-
 	if (drive->quirk_list)
 		return;
+
 	/* drives in the quirk_list may not like intr setups/cleanups */
-	hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
+	outb(drive->ctl | 2, IDE_CONTROL_REG);
 }
 
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
@@ -691,8 +690,8 @@ static void hpt3xx_maskproc(ide_drive_t 
 				enable_irq (hwif->irq);
 		}
 	} else
-		hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
-			   IDE_CONTROL_REG);
+		outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
+		     IDE_CONTROL_REG);
 }
 
 /*
@@ -732,9 +731,9 @@ static void hpt370_irq_timeout(ide_drive
 	printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
 
 	/* get DMA command mode */
-	dma_cmd = hwif->INB(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_command);
 	/* stop DMA */
-	hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command);
+	outb(dma_cmd & ~0x1, hwif->dma_command);
 	hpt370_clear_engine(drive);
 }
 
@@ -749,12 +748,12 @@ static void hpt370_ide_dma_start(ide_dri
 static int hpt370_ide_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8  dma_stat		= hwif->INB(hwif->dma_status);
+	u8  dma_stat		= inb(hwif->dma_status);
 
 	if (dma_stat & 0x01) {
 		/* wait a little */
 		udelay(20);
-		dma_stat = hwif->INB(hwif->dma_status);
+		dma_stat = inb(hwif->dma_status);
 		if (dma_stat & 0x01)
 			hpt370_irq_timeout(drive);
 	}
@@ -815,34 +814,32 @@ static int hpt374_ide_dma_end(ide_drive_
 
 static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
 {
-	u8 scr2 = hwif->INB(hwif->dma_master + 0x7b);
+	u8 scr2 = inb(hwif->dma_master + 0x7b);
 
 	if ((scr2 & 0x7f) == mode)
 		return;
 
 	/* Tristate the bus */
-	hwif->OUTB(0x80, hwif->dma_master + 0x73);
-	hwif->OUTB(0x80, hwif->dma_master + 0x77);
+	outb(0x80, hwif->dma_master + 0x73);
+	outb(0x80, hwif->dma_master + 0x77);
 
 	/* Switch clock and reset channels */
-	hwif->OUTB(mode, hwif->dma_master + 0x7b);
-	hwif->OUTB(0xc0, hwif->dma_master + 0x79);
+	outb(mode, hwif->dma_master + 0x7b);
+	outb(0xc0, hwif->dma_master + 0x79);
 
 	/*
 	 * Reset the state machines.
 	 * NOTE: avoid accidentally enabling the disabled channels.
 	 */
-	hwif->OUTB(hwif->INB(hwif->dma_master + 0x70) | 0x32,
-		   hwif->dma_master + 0x70);
-	hwif->OUTB(hwif->INB(hwif->dma_master + 0x74) | 0x32,
-		   hwif->dma_master + 0x74);
+	outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
+	outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
 
 	/* Complete reset */
-	hwif->OUTB(0x00, hwif->dma_master + 0x79);
+	outb(0x00, hwif->dma_master + 0x79);
 
 	/* Reconnect channels to bus */
-	hwif->OUTB(0x00, hwif->dma_master + 0x73);
-	hwif->OUTB(0x00, hwif->dma_master + 0x77);
+	outb(0x00, hwif->dma_master + 0x73);
+	outb(0x00, hwif->dma_master + 0x77);
 }
 
 /**
@@ -1332,7 +1329,7 @@ static void __devinit init_dma_hpt366(id
 	u8 dma_new	= 0, dma_old	= 0;
 	unsigned long flags;
 
-	dma_old = hwif->INB(dmabase + 2);
+	dma_old = inb(dmabase + 2);
 
 	local_irq_save(flags);
 
@@ -1343,7 +1340,7 @@ static void __devinit init_dma_hpt366(id
 	if (masterdma & 0x30)	dma_new |= 0x20;
 	if ( slavedma & 0x30)	dma_new |= 0x40;
 	if (dma_new != dma_old)
-		hwif->OUTB(dma_new, dmabase + 2);
+		outb(dma_new, dmabase + 2);
 
 	local_irq_restore(flags);
 
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -318,9 +318,9 @@ static void piix_dma_clear_irq(ide_drive
 	u8 dma_stat;
 
 	/* clear the INTR & ERROR bits */
-	dma_stat = hwif->INB(hwif->dma_status);
+	dma_stat = inb(hwif->dma_status);
 	/* Should we force the bit as well ? */
-	hwif->OUTB(dma_stat, hwif->dma_status);
+	outb(dma_stat, hwif->dma_status);
 }
 
 struct ich_laptop {
Index: b/drivers/ide/pci/tc86c001.c
===================================================================
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -17,7 +17,7 @@ static void tc86c001_set_mode(ide_drive_
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
-	u16 mode, scr		= hwif->INW(scr_port);
+	u16 mode, scr		= inw(scr_port);
 
 	switch (speed) {
 		case XFER_UDMA_4:	mode = 0x00c0; break;
@@ -65,7 +65,7 @@ static int tc86c001_timer_expiry(ide_dri
 	ide_hwif_t *hwif	= HWIF(drive);
 	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
 	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
-	u8 dma_stat		= hwif->INB(hwif->dma_status);
+	u8 dma_stat		= inb(hwif->dma_status);
 
 	/* Restore a higher level driver's expiry handler first. */
 	hwgroup->expiry	= expiry;
@@ -73,7 +73,7 @@ static int tc86c001_timer_expiry(ide_dri
 	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
 		unsigned long sc_base	= hwif->config_data;
 		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
-		u8 dma_cmd		= hwif->INB(hwif->dma_command);
+		u8 dma_cmd		= inb(hwif->dma_command);
 
 		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
 		       "attempting recovery...\n", drive->name);
@@ -135,7 +135,7 @@ static int tc86c001_busproc(ide_drive_t 
 	u16 scr1;
 
 	/* System Control 1 Register bit 11 (ATA Hard Reset) read */
-	scr1 = hwif->INW(sc_base + 0x00);
+	scr1 = inw(sc_base + 0x00);
 
 	switch (state) {
 		case BUSSTATE_ON:
@@ -165,7 +165,7 @@ static int tc86c001_busproc(ide_drive_t 
 static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
 {
 	unsigned long sc_base	= pci_resource_start(hwif->pci_dev, 5);
-	u16 scr1		= hwif->INW(sc_base + 0x00);;
+	u16 scr1		= inw(sc_base + 0x00);
 
 	/* System Control 1 Register bit 15 (Soft Reset) set */
 	outw(scr1 |  0x8000, sc_base + 0x00);
@@ -205,7 +205,7 @@ static void __devinit init_hwif_tc86c001
 		 * System Control  1 Register bit 13 (PDIAGN):
 		 * 0=80-pin cable, 1=40-pin cable
 		 */
-		scr1 = hwif->INW(sc_base + 0x00);
+		scr1 = inw(sc_base + 0x00);
 		hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 	}
 }

             reply	other threads:[~2007-08-29 21:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-29 21:18 Bartlomiej Zolnierkiewicz [this message]
2007-09-01 16:31 ` [PATCH 2/10] ide: use I/O ops directly part #2 Sergei Shtylyov
2007-09-05 20:43   ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200708292318.23393.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=sshtylyov@ru.mvista.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.