From: Vitaly Bordug <vitb@kernel.crashing.org>
To: Scott Wood <scottwood@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 7/9] 8xx: mpc885ads cleanup
Date: Thu, 30 Aug 2007 02:03:40 +0400 [thread overview]
Message-ID: <20070830020340.2e93ed6a@localhost.localdomain> (raw)
In-Reply-To: <20070828201909.GH24260@ld0162-tx32.am.freescale.net>
On Tue, 28 Aug 2007 15:19:09 -0500
Scott Wood wrote:
> It now uses the new CPM binding and the generic pin/clock functions,
> and has assorted fixes and cleanup.
>
good work, thanks.
> Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
> ---
> arch/powerpc/boot/dts/mpc885ads.dts | 192 ++++++-----
> arch/powerpc/configs/mpc885_ads_defconfig | 445
> +++++++++++---------------
> arch/powerpc/platforms/8xx/Kconfig | 1 +
> arch/powerpc/platforms/8xx/mpc885ads.h | 38 ---
> arch/powerpc/platforms/8xx/mpc885ads_setup.c | 455
> +++++++++----------------- 5 files changed, 455 insertions(+), 676
> deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc885ads.dts
> b/arch/powerpc/boot/dts/mpc885ads.dts index dc7ab9c..76c0a06 100644
> --- a/arch/powerpc/boot/dts/mpc885ads.dts
> +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> @@ -2,6 +2,7 @@
> * MPC885 ADS Device Tree Source
> *
> * Copyright 2006 MontaVista Software, Inc.
> + * Copyright 2007 Freescale Semiconductor, Inc.
> *
> * This program is free software; you can redistribute it and/or
> modify it
> * under the terms of the GNU General Public License as published
> by the @@ -12,7 +13,7 @@
>
> / {
> model = "MPC885ADS";
> - compatible = "mpc8xx";
> + compatible = "fsl,mpc885ads";
> #address-cells = <1>;
> #size-cells = <1>;
>
> @@ -23,161 +24,180 @@
> PowerPC,885@0 {
> device_type = "cpu";
> reg = <0>;
> - d-cache-line-size = <20>; // 32 bytes
> - i-cache-line-size = <20>; // 32 bytes
> - d-cache-size = <2000>; // L1,
> 8K
> - i-cache-size = <2000>; // L1,
> 8K
> + d-cache-line-size = <d#16>;
> + i-cache-line-size = <d#16>;
> + d-cache-size = <d#8192>;
> + i-cache-size = <d#8192>;
> timebase-frequency = <0>;
> bus-frequency = <0>;
> clock-frequency = <0>;
> - 32-bit;
> interrupts = <f 2>; // decrementer
> interrupt
> - interrupt-parent = <&Mpc8xx_pic>;
> + interrupt-parent = <&PIC>;
> };
> };
>
> memory {
> device_type = "memory";
> - reg = <00000000 800000>;
> + reg = <0 0>;
> };
>
> - soc885@ff000000 {
> + chipselect {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash@fe000000 {
> + device_type = "rom";
> + compatible = "direct-mapped";
> + reg = <fe000000 800000>;
> + probe-type = "JEDEC";
> + bank-width = <4>;
> + };
> +
> + board-control@ff080000 {
> + reg = <ff080000 20 ff0a0300 4>;
> + compatible = "fsl,mpc885ads-bcsr";
> + };
> + };
> +
> + soc@ff000000 {
> + compatible = "fsl,mpc885", "fsl,pq1-soc";
> #address-cells = <1>;
> #size-cells = <1>;
> - #interrupt-cells = <2>;
> device_type = "soc";
> - ranges = <0 ff000000 00100000>;
> - reg = <ff000000 00000200>;
> + ranges = <0 ff000000 00004000>;
> bus-frequency = <0>;
> - mdio@e80 {
> - device_type = "mdio";
> - compatible = "fs_enet";
> - reg = <e80 8>;
> +
> + mdio@e00 {
> + compatible = "fsl,mpc885-fec-mdio",
> "fsl,pq1-fec-mdio";
> + reg = <e00 188>;
> #address-cells = <1>;
> #size-cells = <0>;
> - Phy0: ethernet-phy@0 {
> +
> + PHY0: ethernet-phy@0 {
> reg = <0>;
> device_type = "ethernet-phy";
> };
> - Phy1: ethernet-phy@1 {
> +
> + PHY1: ethernet-phy@1 {
> reg = <1>;
> device_type = "ethernet-phy";
> };
> - Phy2: ethernet-phy@2 {
> +
> + PHY2: ethernet-phy@2 {
> reg = <2>;
> device_type = "ethernet-phy";
> };
> };
>
> - fec@e00 {
> + ethernet@e00 {
> device_type = "network";
> - compatible = "fs_enet";
> - model = "FEC";
> - device-id = <1>;
> + compatible = "fsl,mpc885-fec-enet",
> + "fsl,pq1-fec-enet";
> reg = <e00 188>;
> - mac-address = [ 00 00 0C 00 01 FD ];
> + local-mac-address = [ 00 00 00 00 00 00 ];
> interrupts = <3 1>;
> - interrupt-parent = <&Mpc8xx_pic>;
> - phy-handle = <&Phy1>;
> + interrupt-parent = <&PIC>;
> + phy-handle = <&PHY0>;
> + linux,network-index = <0>;
> };
>
> - fec@1e00 {
> + ethernet@1e00 {
> device_type = "network";
> - compatible = "fs_enet";
> - model = "FEC";
> - device-id = <2>;
> + compatible = "fsl,mpc885-fec-enet",
> + "fsl,pq1-fec-enet";
> reg = <1e00 188>;
> - mac-address = [ 00 00 0C 00 02 FD ];
> + local-mac-address = [ 00 00 00 00 00 00 ];
> interrupts = <7 1>;
> - interrupt-parent = <&Mpc8xx_pic>;
> - phy-handle = <&Phy2>;
> + interrupt-parent = <&PIC>;
> + phy-handle = <&PHY1>;
> + linux,network-index = <1>;
> };
>
> - Mpc8xx_pic: pic@ff000000 {
> + PIC: interrupt-controller@0 {
> interrupt-controller;
> - #address-cells = <0>;
> #interrupt-cells = <2>;
> reg = <0 24>;
> - built-in;
> - device_type = "mpc8xx-pic";
> - compatible = "CPM";
> + compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
> };
>
> - pcmcia@0080 {
> + pcmcia@80 {
> #address-cells = <3>;
> #interrupt-cells = <1>;
> #size-cells = <2>;
> compatible = "fsl,pq-pcmcia";
> device_type = "pcmcia";
> reg = <80 80>;
> - interrupt-parent = <&Mpc8xx_pic>;
> + interrupt-parent = <&PIC>;
> interrupts = <d 1>;
> };
>
> - cpm@ff000000 {
> + cpm@9c0 {
> #address-cells = <1>;
> #size-cells = <1>;
> - #interrupt-cells = <2>;
> - device_type = "cpm";
> - model = "CPM";
> - ranges = <0 0 4000>;
> - reg = <860 f0>;
> + compatible = "fsl,mpc885-cpm", "fsl,cpm1";
> command-proc = <9c0>;
> - brg-frequency = <0>;
> - interrupts = <0 2>; // cpm error
> interrupt
> - interrupt-parent = <&Cpm_pic>;
> + fsl,brg-frequency = <0>;
> + interrupts = <0>; // cpm error
> interrupt
> + interrupt-parent = <&CPM_PIC>;
> + reg = <9c0 40 2000 1c00>;
> + ranges;
>
> - Cpm_pic: pic@930 {
> + brg@9f0 {
> + compatible = "fsl,mpc885-brg",
> + "fsl,cpm1-brg",
> + "fsl,cpm-brg";
> + reg = <9f0 10>;
> + };
> +
> + CPM_PIC: interrupt-controller@930 {
> interrupt-controller;
> - #address-cells = <0>;
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> interrupts = <5 2 0 2>;
> - interrupt-parent = <&Mpc8xx_pic>;
> + interrupt-parent = <&PIC>;
> reg = <930 20>;
> - built-in;
> - device_type = "cpm-pic";
> - compatible = "CPM";
> + compatible = "fsl,mpc885-cpm-pic",
> + "fsl,cpm1-pic";
> };
>
> - smc@a80 {
> + serial@a80 {
> device_type = "serial";
> - compatible = "cpm_uart";
> - model = "SMC";
> - device-id = <1>;
> + compatible = "fsl,mpc885-smc-uart",
> + "fsl,cpm1-smc-uart";
> reg = <a80 10 3e80 40>;
> - clock-setup = <00ffffff 0>;
> - rx-clock = <1>;
> - tx-clock = <1>;
> - current-speed = <0>;
> - interrupts = <4 3>;
> - interrupt-parent = <&Cpm_pic>;
> + interrupts = <4>;
> + interrupt-parent = <&CPM_PIC>;
> + fsl,cpm-brg = <1>;
> + fsl,cpm-command = <0090>;
> };
>
> - smc@a90 {
> + serial@a90 {
> device_type = "serial";
> - compatible = "cpm_uart";
> - model = "SMC";
> - device-id = <2>;
> - reg = <a90 20 3f80 40>;
> - clock-setup = <ff00ffff 90000>;
> - rx-clock = <2>;
> - tx-clock = <2>;
> - current-speed = <0>;
> - interrupts = <3 3>;
> - interrupt-parent = <&Cpm_pic>;
> + compatible = "fsl,mpc885-smc-uart",
> + "fsl,cpm1-smc-uart";
> + reg = <a90 10 3f80 40>;
> + interrupts = <3>;
> + interrupt-parent = <&CPM_PIC>;
> + fsl,cpm-brg = <2>;
> + fsl,cpm-command = <00d0>;
> };
>
> - scc@a40 {
> + ethernet@a40 {
> device_type = "network";
> - compatible = "fs_enet";
> - model = "SCC";
> - device-id = <3>;
> - reg = <a40 18 3e00 80>;
> - mac-address = [ 00 00 0C 00 03 FD ];
> - interrupts = <1c 3>;
> - interrupt-parent = <&Cpm_pic>;
> - phy-handle = <&Phy2>;
> + compatible = "fsl,mpc885-scc-enet",
> + "fsl,cpm1-scc-enet";
> + reg = <a40 18 3e00 100>;
> + local-mac-address = [ 00 00 00 00 00
> 00 ];
> + interrupts = <1c>;
> + interrupt-parent = <&CPM_PIC>;
> + phy-handle = <&PHY2>;
> + fsl,cpm-command = <0080>;
> + linux,network-index = <2>;
> };
> };
> };
> +
> + chosen {
> + linux,stdout-path = "/soc/cpm/serial@a80";
> + };
> };
> diff --git a/arch/powerpc/configs/mpc885_ads_defconfig
> b/arch/powerpc/configs/mpc885_ads_defconfig index fc4f9b7..482d99d
> 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig
> +++ b/arch/powerpc/configs/mpc885_ads_defconfig
> @@ -1,9 +1,22 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.22-rc7
> -# Sun Jul 1 23:57:01 2007
> +# Linux kernel version: 2.6.23-rc3
> +# Mon Aug 27 15:23:16 2007
> #
> # CONFIG_PPC64 is not set
> +
> +#
> +# Processor support
> +#
> +# CONFIG_6xx is not set
> +# CONFIG_PPC_85xx is not set
> +CONFIG_PPC_8xx=y
> +# CONFIG_40x is not set
> +# CONFIG_44x is not set
> +# CONFIG_E200 is not set
> +CONFIG_8xx=y
> +# CONFIG_PPC_MM_SLICES is not set
> +CONFIG_NOT_COHERENT_CACHE=y
> CONFIG_PPC32=y
> CONFIG_PPC_MERGE=y
> CONFIG_MMU=y
> @@ -14,56 +27,38 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
> CONFIG_PPC=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_NVRAM=y
> CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_PPC_OF=y
> +CONFIG_OF=y
> # CONFIG_PPC_UDBG_16550 is not set
> # CONFIG_GENERIC_TBSYNC is not set
> CONFIG_AUDIT_ARCH=y
> +CONFIG_GENERIC_BUG=y
> # CONFIG_DEFAULT_UIMAGE is not set
> -
> -#
> -# Processor support
> -#
> -# CONFIG_CLASSIC32 is not set
> -# CONFIG_PPC_82xx is not set
> -# CONFIG_PPC_83xx is not set
> -# CONFIG_PPC_85xx is not set
> -# CONFIG_PPC_86xx is not set
> -CONFIG_PPC_8xx=y
> -# CONFIG_40x is not set
> -# CONFIG_44x is not set
> -# CONFIG_E200 is not set
> -CONFIG_8xx=y
> # CONFIG_PPC_DCR_NATIVE is not set
> # CONFIG_PPC_DCR_MMIO is not set
> -# CONFIG_PPC_MM_SLICES is not set
> -CONFIG_NOT_COHERENT_CACHE=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> -# Code maturity level options
> +# General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> -
> -#
> -# General setup
> -#
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> # CONFIG_SWAP is not set
> CONFIG_SYSVIPC=y
> -# CONFIG_IPC_NS is not set
> CONFIG_SYSVIPC_SYSCTL=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_TASKSTATS is not set
> -# CONFIG_UTS_NS is not set
> +# CONFIG_USER_NS is not set
> # CONFIG_AUDIT is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=14
> @@ -75,52 +70,46 @@ CONFIG_SYSCTL=y
> CONFIG_EMBEDDED=y
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_KALLSYMS=y
> +# CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> -# CONFIG_HOTPLUG is not set
> +CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> -# CONFIG_BUG is not set
> -CONFIG_ELF_CORE=y
> +CONFIG_BUG=y
> +# CONFIG_ELF_CORE is not set
> # CONFIG_BASE_FULL is not set
> -CONFIG_FUTEX=y
> +# CONFIG_FUTEX is not set
> CONFIG_ANON_INODES=y
> -# CONFIG_EPOLL is not set
> +CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> # CONFIG_VM_EVENT_COUNTERS is not set
> -CONFIG_SLAB=y
> -# CONFIG_SLUB is not set
> +CONFIG_SLUB_DEBUG=y
> +# CONFIG_SLAB is not set
> +CONFIG_SLUB=y
> # CONFIG_SLOB is not set
> -CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=1
> -
> -#
> -# Loadable module support
> -#
> # CONFIG_MODULES is not set
> -
> -#
> -# Block layer
> -#
> CONFIG_BLOCK=y
> # CONFIG_LBD is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_LSF is not set
> +# CONFIG_BLK_DEV_BSG is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> -CONFIG_IOSCHED_AS=y
> +# CONFIG_IOSCHED_AS is not set
> CONFIG_IOSCHED_DEADLINE=y
> -CONFIG_IOSCHED_CFQ=y
> -CONFIG_DEFAULT_AS=y
> -# CONFIG_DEFAULT_DEADLINE is not set
> +# CONFIG_IOSCHED_CFQ is not set
> +# CONFIG_DEFAULT_AS is not set
> +CONFIG_DEFAULT_DEADLINE=y
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> -CONFIG_DEFAULT_IOSCHED="anticipatory"
> +CONFIG_DEFAULT_IOSCHED="deadline"
>
> #
> # Platform support
> @@ -133,6 +122,7 @@ CONFIG_CPM1=y
> # CONFIG_MPC8XXFADS is not set
> # CONFIG_MPC86XADS is not set
> CONFIG_MPC885ADS=y
> +# CONFIG_PPC_EP88XC is not set
>
> #
> # Freescale Ethernet driver platform-specific options
> @@ -150,6 +140,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
> #
> CONFIG_8xx_COPYBACK=y
> # CONFIG_8xx_CPU6 is not set
> +CONFIG_8xx_CPU15=y
> CONFIG_NO_UCODE_PATCH=y
> # CONFIG_USB_SOF_UCODE_PATCH is not set
> # CONFIG_I2C_SPI_UCODE_PATCH is not set
> @@ -166,22 +157,23 @@ CONFIG_NO_UCODE_PATCH=y
> # CONFIG_GENERIC_IOMAP is not set
> # CONFIG_CPU_FREQ is not set
> # CONFIG_CPM2 is not set
> +CONFIG_PPC_CPM_NEW_BINDING=y
>
> #
> # Kernel options
> #
> # CONFIG_HIGHMEM is not set
> -# CONFIG_HZ_100 is not set
> +CONFIG_HZ_100=y
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> -CONFIG_HZ_1000=y
> -CONFIG_HZ=1000
> +# CONFIG_HZ_1000 is not set
> +CONFIG_HZ=100
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> -CONFIG_MATH_EMULATION=y
> +# CONFIG_MATH_EMULATION is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> @@ -195,11 +187,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> # CONFIG_RESOURCES_64BIT is not set
> CONFIG_ZONE_DMA_FLAG=1
> -# CONFIG_PROC_DEVICETREE is not set
> +CONFIG_BOUNCE=y
> +CONFIG_VIRT_TO_BUS=y
> +CONFIG_PROC_DEVICETREE=y
> # CONFIG_CMDLINE_BOOL is not set
> # CONFIG_PM is not set
> # CONFIG_SECCOMP is not set
> -# CONFIG_WANT_DEVICE_TREE is not set
> +CONFIG_WANT_DEVICE_TREE=y
> +CONFIG_DEVICE_TREE="mpc885ads.dts"
> CONFIG_ISA_DMA_API=y
>
> #
> @@ -209,12 +204,14 @@ CONFIG_ZONE_DMA=y
> CONFIG_FSL_SOC=y
> # CONFIG_PCI is not set
> # CONFIG_PCI_DOMAINS is not set
> +# CONFIG_PCI_SYSCALL is not set
> # CONFIG_PCI_QSPAN is not set
> # CONFIG_ARCH_SUPPORTS_MSI is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> +# CONFIG_PCCARD is not set
>
> #
> # Advanced setup
> @@ -243,10 +240,6 @@ CONFIG_NET=y
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> -CONFIG_XFRM=y
> -# CONFIG_XFRM_USER is not set
> -# CONFIG_XFRM_SUB_POLICY is not set
> -# CONFIG_XFRM_MIGRATE is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> @@ -266,9 +259,9 @@ CONFIG_SYN_COOKIES=y
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> # CONFIG_INET_TUNNEL is not set
> -CONFIG_INET_XFRM_MODE_TRANSPORT=y
> -CONFIG_INET_XFRM_MODE_TUNNEL=y
> -CONFIG_INET_XFRM_MODE_BEET=y
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> @@ -317,6 +310,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
> # CONFIG_MAC80211 is not set
> # CONFIG_IEEE80211 is not set
> # CONFIG_RFKILL is not set
> +# CONFIG_NET_9P is not set
>
> #
> # Device Drivers
> @@ -327,40 +321,91 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> +# CONFIG_FW_LOADER is not set
> +# CONFIG_DEBUG_DRIVER is not set
> +# CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> -
> -#
> -# Connector - unified userspace <-> kernelspace linker
> -#
> # CONFIG_CONNECTOR is not set
> -# CONFIG_MTD is not set
> -
> -#
> -# Parallel port support
> -#
> +CONFIG_MTD=y
> +# CONFIG_MTD_DEBUG is not set
> +# CONFIG_MTD_CONCAT is not set
> +# CONFIG_MTD_PARTITIONS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +# CONFIG_MTD_CFI is not set
> +CONFIG_MTD_JEDECPROBE=y
> +CONFIG_MTD_GEN_PROBE=y
> +CONFIG_MTD_CFI_ADV_OPTIONS=y
> +CONFIG_MTD_CFI_NOSWAP=y
> +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> +CONFIG_MTD_CFI_GEOMETRY=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +# CONFIG_MTD_CFI_I1 is not set
> +# CONFIG_MTD_CFI_I2 is not set
> +CONFIG_MTD_CFI_I4=y
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_OTP is not set
> +# CONFIG_MTD_CFI_INTELEXT is not set
> +CONFIG_MTD_CFI_AMDSTD=y
> +# CONFIG_MTD_CFI_STAA is not set
> +CONFIG_MTD_CFI_UTIL=y
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_PHYSMAP is not set
> +CONFIG_MTD_PHYSMAP_OF=y
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +# CONFIG_MTD_NAND is not set
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# UBI - Unsorted block images
> +#
> +# CONFIG_MTD_UBI is not set
> +CONFIG_OF_DEVICE=y
> # CONFIG_PARPORT is not set
> -
> -#
> -# Plug and Play support
> -#
> -# CONFIG_PNPACPI is not set
> -
> -#
> -# Block devices
> -#
> -# CONFIG_BLK_DEV_FD is not set
> -# CONFIG_BLK_DEV_COW_COMMON is not set
> -CONFIG_BLK_DEV_LOOP=y
> -# CONFIG_BLK_DEV_CRYPTOLOOP is not set
> -# CONFIG_BLK_DEV_NBD is not set
> -# CONFIG_BLK_DEV_RAM is not set
> -# CONFIG_CDROM_PKTCDVD is not set
> -# CONFIG_ATA_OVER_ETH is not set
> -
> -#
> -# Misc devices
> -#
> -# CONFIG_BLINK is not set
> +# CONFIG_BLK_DEV is not set
> +# CONFIG_MISC_DEVICES is not set
> # CONFIG_IDE is not set
>
> #
> @@ -368,21 +413,16 @@ CONFIG_BLK_DEV_LOOP=y
> #
> # CONFIG_RAID_ATTRS is not set
> # CONFIG_SCSI is not set
> +# CONFIG_SCSI_DMA is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_ATA is not set
> -
> -#
> -# Multi-device support (RAID and LVM)
> -#
> # CONFIG_MD is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> -
> -#
> -# Network device support
> -#
> CONFIG_NETDEVICES=y
> +# CONFIG_NETDEVICES_MULTIQUEUE is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> +# CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> CONFIG_PHYLIB=y
> @@ -398,21 +438,16 @@ CONFIG_DAVICOM_PHY=y
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_BROADCOM_PHY is not set
> -CONFIG_FIXED_PHY=y
> -CONFIG_FIXED_MII_10_FDX=y
> -# CONFIG_FIXED_MII_100_FDX is not set
> -
> -#
> -# Ethernet (10 or 100Mbit)
> -#
> +# CONFIG_ICPLUS_PHY is not set
> +# CONFIG_FIXED_PHY is not set
> +# CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> -# CONFIG_FEC_8XX is not set
> CONFIG_FS_ENET=y
> -CONFIG_FS_ENET_HAS_SCC=y
> +# CONFIG_FS_ENET_HAS_SCC is not set
> CONFIG_FS_ENET_HAS_FEC=y
> -CONFIG_NETDEV_1000=y
> -CONFIG_NETDEV_10000=y
> +# CONFIG_NETDEV_1000 is not set
> +# CONFIG_NETDEV_10000 is not set
>
> #
> # Wireless LAN
> @@ -426,69 +461,18 @@ CONFIG_NETDEV_10000=y
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> -
> -#
> -# ISDN subsystem
> -#
> # CONFIG_ISDN is not set
> -
> -#
> -# Telephony Support
> -#
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> -CONFIG_INPUT=y
> -# CONFIG_INPUT_FF_MEMLESS is not set
> -# CONFIG_INPUT_POLLDEV is not set
> -
> -#
> -# Userland interfaces
> -#
> -CONFIG_INPUT_MOUSEDEV=y
> -CONFIG_INPUT_MOUSEDEV_PSAUX=y
> -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> -# CONFIG_INPUT_JOYDEV is not set
> -# CONFIG_INPUT_TSDEV is not set
> -# CONFIG_INPUT_EVDEV is not set
> -# CONFIG_INPUT_EVBUG is not set
> -
> -#
> -# Input Device Drivers
> -#
> -CONFIG_INPUT_KEYBOARD=y
> -CONFIG_KEYBOARD_ATKBD=y
> -# CONFIG_KEYBOARD_SUNKBD is not set
> -# CONFIG_KEYBOARD_LKKBD is not set
> -# CONFIG_KEYBOARD_XTKBD is not set
> -# CONFIG_KEYBOARD_NEWTON is not set
> -# CONFIG_KEYBOARD_STOWAWAY is not set
> -CONFIG_INPUT_MOUSE=y
> -CONFIG_MOUSE_PS2=y
> -CONFIG_MOUSE_PS2_ALPS=y
> -CONFIG_MOUSE_PS2_LOGIPS2PP=y
> -CONFIG_MOUSE_PS2_SYNAPTICS=y
> -CONFIG_MOUSE_PS2_LIFEBOOK=y
> -CONFIG_MOUSE_PS2_TRACKPOINT=y
> -# CONFIG_MOUSE_PS2_TOUCHKIT is not set
> -# CONFIG_MOUSE_SERIAL is not set
> -# CONFIG_MOUSE_VSXXXAA is not set
> -# CONFIG_INPUT_JOYSTICK is not set
> -# CONFIG_INPUT_TABLET is not set
> -# CONFIG_INPUT_TOUCHSCREEN is not set
> -# CONFIG_INPUT_MISC is not set
> +# CONFIG_INPUT is not set
>
> #
> # Hardware I/O ports
> #
> -CONFIG_SERIO=y
> -CONFIG_SERIO_I8042=y
> -CONFIG_SERIO_SERPORT=y
> -CONFIG_SERIO_LIBPS2=y
> -# CONFIG_SERIO_RAW is not set
> +# CONFIG_SERIO is not set
> # CONFIG_GAMEPORT is not set
>
> #
> @@ -518,10 +502,6 @@ CONFIG_SERIAL_CPM_SMC1=y
> CONFIG_SERIAL_CPM_SMC2=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> -
> -#
> -# IPMI
> -#
> # CONFIG_IPMI_HANDLER is not set
> # CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> @@ -530,10 +510,6 @@ CONFIG_GEN_RTC=y
> # CONFIG_GEN_RTC_X is not set
> # CONFIG_R3964 is not set
> # CONFIG_RAW_DRIVER is not set
> -
> -#
> -# TPM devices
> -#
> # CONFIG_TCG_TPM is not set
> # CONFIG_I2C is not set
>
> @@ -542,21 +518,9 @@ CONFIG_GEN_RTC=y
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
> -
> -#
> -# Dallas's 1-wire bus
> -#
> # CONFIG_W1 is not set
> -CONFIG_HWMON=y
> -# CONFIG_HWMON_VID is not set
> -# CONFIG_SENSORS_ABITUGURU is not set
> -# CONFIG_SENSORS_F71805F is not set
> -# CONFIG_SENSORS_PC87427 is not set
> -# CONFIG_SENSORS_SMSC47M1 is not set
> -# CONFIG_SENSORS_SMSC47B397 is not set
> -# CONFIG_SENSORS_VT1211 is not set
> -# CONFIG_SENSORS_W83627HF is not set
> -# CONFIG_HWMON_DEBUG_CHIP is not set
> +# CONFIG_POWER_SUPPLY is not set
> +# CONFIG_HWMON is not set
>
> #
> # Multifunction device drivers
> @@ -580,6 +544,7 @@ CONFIG_DAB=y
> #
> # CONFIG_DISPLAY_SUPPORT is not set
> # CONFIG_VGASTATE is not set
> +# CONFIG_VIDEO_OUTPUT_CONTROL is not set
> # CONFIG_FB is not set
> # CONFIG_FB_IBM_GXT4500 is not set
>
> @@ -587,54 +552,10 @@ CONFIG_DAB=y
> # Sound
> #
> # CONFIG_SOUND is not set
> -
> -#
> -# HID Devices
> -#
> -CONFIG_HID=y
> -# CONFIG_HID_DEBUG is not set
> -
> -#
> -# USB support
> -#
> -# CONFIG_USB_ARCH_HAS_HCD is not set
> -# CONFIG_USB_ARCH_HAS_OHCI is not set
> -# CONFIG_USB_ARCH_HAS_EHCI is not set
> -
> -#
> -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> -#
> -
> -#
> -# USB Gadget Support
> -#
> -# CONFIG_USB_GADGET is not set
> +# CONFIG_USB_SUPPORT is not set
> # CONFIG_MMC is not set
> -
> -#
> -# LED devices
> -#
> # CONFIG_NEW_LEDS is not set
> -
> -#
> -# LED drivers
> -#
> -
> -#
> -# LED Triggers
> -#
> -
> -#
> -# InfiniBand support
> -#
> -
> -#
> -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> -#
> -
> -#
> -# Real Time Clock
> -#
> +# CONFIG_EDAC is not set
> # CONFIG_RTC_CLASS is not set
>
> #
> @@ -651,21 +572,16 @@ CONFIG_HID=y
> #
>
> #
> +# Userspace I/O
> +#
> +# CONFIG_UIO is not set
> +
> +#
> # File systems
> #
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT2_FS_XATTR=y
> -# CONFIG_EXT2_FS_POSIX_ACL is not set
> -# CONFIG_EXT2_FS_SECURITY is not set
> -# CONFIG_EXT2_FS_XIP is not set
> -CONFIG_EXT3_FS=y
> -CONFIG_EXT3_FS_XATTR=y
> -# CONFIG_EXT3_FS_POSIX_ACL is not set
> -# CONFIG_EXT3_FS_SECURITY is not set
> +# CONFIG_EXT2_FS is not set
> +# CONFIG_EXT3_FS is not set
> # CONFIG_EXT4DEV_FS is not set
> -CONFIG_JBD=y
> -# CONFIG_JBD_DEBUG is not set
> -CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_FS_POSIX_ACL is not set
> @@ -674,10 +590,9 @@ CONFIG_FS_MBCACHE=y
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> -CONFIG_INOTIFY=y
> -CONFIG_INOTIFY_USER=y
> +# CONFIG_INOTIFY is not set
> # CONFIG_QUOTA is not set
> -CONFIG_DNOTIFY=y
> +# CONFIG_DNOTIFY is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
> @@ -718,6 +633,7 @@ CONFIG_RAMFS=y
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> +# CONFIG_JFFS2_FS is not set
> CONFIG_CRAMFS=y
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> @@ -747,7 +663,6 @@ CONFIG_SUNRPC=y
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> -# CONFIG_9P_FS is not set
>
> #
> # Partition Types
> @@ -785,14 +700,13 @@ CONFIG_MSDOS_PARTITION=y
> #
> # Library routines
> #
> -CONFIG_BITREVERSE=y
> -CONFIG_CRC_CCITT=y
> +# CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> # CONFIG_CRC_ITU_T is not set
> -CONFIG_CRC32=y
> +# CONFIG_CRC32 is not set
> +# CONFIG_CRC7 is not set
> # CONFIG_LIBCRC32C is not set
> CONFIG_ZLIB_INFLATE=y
> -CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> @@ -807,12 +721,33 @@ CONFIG_HAS_DMA=y
> #
> # CONFIG_PRINTK_TIME is not set
> CONFIG_ENABLE_MUST_CHECK=y
> -# CONFIG_MAGIC_SYSRQ is not set
> +CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_HEADERS_CHECK is not set
> -# CONFIG_DEBUG_KERNEL is not set
> -# CONFIG_BOOTX_TEXT is not set
> +CONFIG_DEBUG_KERNEL=y
> +# CONFIG_DEBUG_SHIRQ is not set
> +CONFIG_DETECT_SOFTLOCKUP=y
> +CONFIG_SCHED_DEBUG=y
> +# CONFIG_SCHEDSTATS is not set
> +# CONFIG_TIMER_STATS is not set
> +# CONFIG_SLUB_DEBUG_ON is not set
> +# CONFIG_DEBUG_SPINLOCK is not set
> +# CONFIG_DEBUG_MUTEXES is not set
> +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> +# CONFIG_DEBUG_KOBJECT is not set
> +CONFIG_DEBUG_BUGVERBOSE=y
> +CONFIG_DEBUG_INFO=y
> +# CONFIG_DEBUG_VM is not set
> +# CONFIG_DEBUG_LIST is not set
> +CONFIG_FORCED_INLINING=y
> +# CONFIG_FAULT_INJECTION is not set
> +# CONFIG_DEBUG_STACKOVERFLOW is not set
> +# CONFIG_DEBUG_STACK_USAGE is not set
> +# CONFIG_DEBUG_PAGEALLOC is not set
> +# CONFIG_DEBUGGER is not set
> +# CONFIG_BDI_SWITCH is not set
> # CONFIG_PPC_EARLY_DEBUG is not set
>
> #
> @@ -820,8 +755,4 @@ CONFIG_ENABLE_MUST_CHECK=y
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> -
> -#
> -# Cryptographic options
> -#
> # CONFIG_CRYPTO is not set
> diff --git a/arch/powerpc/platforms/8xx/Kconfig
> b/arch/powerpc/platforms/8xx/Kconfig index b8dd515..4829378 100644
> --- a/arch/powerpc/platforms/8xx/Kconfig
> +++ b/arch/powerpc/platforms/8xx/Kconfig
> @@ -25,6 +25,7 @@ config MPC86XADS
> config MPC885ADS
> bool "MPC885ADS"
> select CPM1
> + select PPC_CPM_NEW_BINDING
> help
> Freescale Semiconductor MPC885 Application Development
> System (ADS). Also known as DUET.
> diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h
> b/arch/powerpc/platforms/8xx/mpc885ads.h index a21e528..a507666 100644
> --- a/arch/powerpc/platforms/8xx/mpc885ads.h
> +++ b/arch/powerpc/platforms/8xx/mpc885ads.h
> @@ -17,25 +17,10 @@
>
> #include <sysdev/fsl_soc.h>
>
> -/* U-Boot maps BCSR to 0xff080000 */
> -#define BCSR_ADDR ((uint)0xff080000)
> -#define BCSR_SIZE ((uint)32)
> -#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
> -#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
> -#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
> -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
> -#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
> -
> -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
> -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR +
> 0x300)) -
> #define MPC8xx_CPM_OFFSET (0x9c0)
> #define CPM_MAP_ADDR (get_immrbase() +
> MPC8xx_CPM_OFFSET) #define CPM_IRQ_OFFSET 16 //
> for compability with cpm_uart driver
> -#define PCMCIA_MEM_ADDR ((uint)0xff020000)
> -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
> -
> /* Bits of interest in the BCSRs.
> */
> #define BCSR1_ETHEN ((uint)0x20000000)
> @@ -64,28 +49,5 @@
> #define BCSR5_MII1_EN 0x02
> #define BCSR5_MII1_RST 0x01
>
> -/* Interrupt level assignments */
> -#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change
> interrupt */ -#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1
> interrupt */ -#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2
> interrupt */ -#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC
> interrupt */ -
> -/* We don't use the 8259 */
> -#define NR_8259_INTS 0
> -
> -/* CPM Ethernet through SCC3 */
> -#define PA_ENET_RXD ((ushort)0x0040)
> -#define PA_ENET_TXD ((ushort)0x0080)
> -#define PE_ENET_TCLK ((uint)0x00004000)
> -#define PE_ENET_RCLK ((uint)0x00008000)
> -#define PE_ENET_TENA ((uint)0x00000010)
> -#define PC_ENET_CLSN ((ushort)0x0400)
> -#define PC_ENET_RENA ((ushort)0x0800)
> -
> -/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
> - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
> -#define SICR_ENET_MASK ((uint)0x00ff0000)
> -#define SICR_ENET_CLKRT ((uint)0x002c0000)
> -
> #endif /* __ASM_MPC885ADS_H__ */
> #endif /* __KERNEL__ */
> diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index bb54268..f205978
> 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> @@ -1,11 +1,13 @@
> -/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
> - *
> +/*
> * Platform setup for the Freescale mpc885ads board
> *
> * Vitaly Bordug <vbordug@ru.mvista.com>
> *
> * Copyright 2005 MontaVista Software Inc.
> *
> + * Heavily modified by Scott Wood <scottwood@freescale.com>
> + * Copyright 2007 Freescale Semiconductor, Inc.
> + *
> * This file is licensed under the terms of the GNU General Public
> License
> * version 2. This program is licensed "as is" without any warranty
> of any
> * kind, whether express or implied.
> @@ -18,7 +20,6 @@
> #include <linux/ioport.h>
> #include <linux/device.h>
> #include <linux/delay.h>
> -#include <linux/root_dev.h>
>
> #include <linux/fs_enet_pd.h>
> #include <linux/fs_uart_pd.h>
> @@ -36,32 +37,26 @@
> #include <asm/8xx_immap.h>
> #include <asm/commproc.h>
> #include <asm/fs_pd.h>
> -#include <asm/prom.h>
> +#include <asm/of_platform.h>
> +#include <asm/udbg.h>
>
> -static void init_smc1_uart_ioports(struct fs_uart_platform_info
> *fpi); -static void init_smc2_uart_ioports(struct
> fs_uart_platform_info *fpi); -static void init_scc3_ioports(struct
> fs_platform_info *ptr); +#include <sysdev/cpm_common.h>
> +#include <sysdev/commproc.h>
> +
> +static u32 __iomem *bcsr, *bcsr5;
>
> #ifdef CONFIG_PCMCIA_M8XX
> static void pcmcia_hw_setup(int slot, int enable)
> {
> - unsigned *bcsr_io;
> -
> - bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> if (enable)
> - clrbits32(bcsr_io, BCSR1_PCCEN);
> + clrbits32(&bcsr[1], BCSR1_PCCEN);
> else
> - setbits32(bcsr_io, BCSR1_PCCEN);
> -
> - iounmap(bcsr_io);
> + setbits32(&bcsr[1], BCSR1_PCCEN);
> }
>
> static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> {
> u32 reg = 0;
> - unsigned *bcsr_io;
> -
> - bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
>
> switch (vcc) {
> case 0:
> @@ -96,330 +91,200 @@ static int pcmcia_set_voltage(int slot, int
> vcc, int vpp) }
>
> /* first, turn off all power */
> - clrbits32(bcsr_io, 0x00610000);
> + clrbits32(&bcsr[1], 0x00610000);
>
> /* enable new powersettings */
> - setbits32(bcsr_io, reg);
> + setbits32(&bcsr[1], reg);
>
> - iounmap(bcsr_io);
> return 0;
> }
> #endif
>
> -void __init mpc885ads_board_setup(void)
> -{
> - cpm8xx_t *cp;
> - unsigned int *bcsr_io;
> - u8 tmpval8;
> -
> -#ifdef CONFIG_FS_ENET
> - iop8xx_t *io_port;
> -#endif
> +struct cpm_pin {
> + int port, pin, flags;
> +};
>
> - bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> - cp = (cpm8xx_t *) immr_map(im_cpm);
> +static struct cpm_pin mpc885ads_pins[] = {
> + /* SMC1 */
> + {1, 24, CPM_PIN_INPUT}, /* RX */
> + {1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
>
> - if (bcsr_io == NULL) {
> - printk(KERN_CRIT "Could not remap BCSR\n");
> - return;
> - }
> -#ifdef CONFIG_SERIAL_CPM_SMC1
> - clrbits32(bcsr_io, BCSR1_RS232EN_1);
> - clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1
> */
> - tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX |
> SMCM_TX);
> - out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
> - clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN |
> SMCMR_TEN); /* brg1 */ -#else
> - setbits32(bcsr_io, BCSR1_RS232EN_1);
> - out_be16(&cp->cp_smc[0].smc_smcmr, 0);
> - out_8(&cp->cp_smc[0].smc_smce, 0);
> + /* SMC2 */
> +#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
> + {4, 21, CPM_PIN_INPUT}, /* RX */
> + {4, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
> #endif
>
> -#ifdef CONFIG_SERIAL_CPM_SMC2
> - clrbits32(bcsr_io, BCSR1_RS232EN_2);
> - clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
> - setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
> - tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX |
> SMCM_TX);
> - out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
> - clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
> -
> - init_smc2_uart_ioports(0);
> -#else
> - setbits32(bcsr_io, BCSR1_RS232EN_2);
> - out_be16(&cp->cp_smc[1].smc_smcmr, 0);
> - out_8(&cp->cp_smc[1].smc_smce, 0);
> -#endif
> - immr_unmap(cp);
> - iounmap(bcsr_io);
> -
> -#ifdef CONFIG_FS_ENET
> - /* use MDC for MII (common) */
> - io_port = (iop8xx_t *) immr_map(im_ioport);
> - setbits16(&io_port->iop_pdpar, 0x0080);
> - clrbits16(&io_port->iop_pddir, 0x0080);
> -
> - bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
> - clrbits32(bcsr_io, BCSR5_MII1_EN);
> - clrbits32(bcsr_io, BCSR5_MII1_RST);
> -#ifndef CONFIG_FC_ENET_HAS_SCC
> - clrbits32(bcsr_io, BCSR5_MII2_EN);
> - clrbits32(bcsr_io, BCSR5_MII2_RST);
> -
> + /* SCC3 */
> + {0, 9, CPM_PIN_INPUT}, /* RX */
> + {0, 8, CPM_PIN_INPUT}, /* TX */
> + {2, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /*
> RENA */
> + {2, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /*
> CLSN */
> + {4, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
> + {4, 17, CPM_PIN_INPUT}, /* CLK5 */
> + {4, 16, CPM_PIN_INPUT}, /* CLK6 */
> +
> + /* MII1 */
> + {0, 0, CPM_PIN_INPUT},
> + {0, 1, CPM_PIN_INPUT},
> + {0, 2, CPM_PIN_INPUT},
> + {0, 3, CPM_PIN_INPUT},
> + {0, 4, CPM_PIN_OUTPUT},
> + {0, 10, CPM_PIN_OUTPUT},
> + {0, 11, CPM_PIN_OUTPUT},
> + {1, 19, CPM_PIN_INPUT},
> + {1, 31, CPM_PIN_INPUT},
> + {2, 12, CPM_PIN_INPUT},
> + {2, 13, CPM_PIN_INPUT},
> + {4, 30, CPM_PIN_OUTPUT},
> + {4, 31, CPM_PIN_OUTPUT},
> +
> + /* MII2 */
> +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
> + {4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 16, CPM_PIN_OUTPUT},
> + {4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
> + {4, 21, CPM_PIN_OUTPUT},
> + {4, 22, CPM_PIN_OUTPUT},
> + {4, 23, CPM_PIN_OUTPUT},
> + {4, 24, CPM_PIN_OUTPUT},
> + {4, 25, CPM_PIN_OUTPUT},
> + {4, 26, CPM_PIN_OUTPUT},
> + {4, 27, CPM_PIN_OUTPUT},
> + {4, 28, CPM_PIN_OUTPUT},
> + {4, 29, CPM_PIN_OUTPUT},
> #endif
> - iounmap(bcsr_io);
> - immr_unmap(io_port);
> +};
>
> -#endif
> -
> -#ifdef CONFIG_PCMCIA_M8XX
> - /*Set up board specific hook-ups */
> - m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
> - m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
> -#endif
> -}
> -
> -static void init_fec1_ioports(struct fs_platform_info *ptr)
> +static void __init init_ioports(void)
> {
> - cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
> - iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
> -
> - /* configure FEC1 pins */
> - setbits16(&io_port->iop_papar, 0xf830);
> - setbits16(&io_port->iop_padir, 0x0830);
> - clrbits16(&io_port->iop_padir, 0xf000);
> -
> - setbits32(&cp->cp_pbpar, 0x00001001);
> - clrbits32(&cp->cp_pbdir, 0x00001001);
> + int i;
>
> - setbits16(&io_port->iop_pcpar, 0x000c);
> - clrbits16(&io_port->iop_pcdir, 0x000c);
> + for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
> + struct cpm_pin *pin = &mpc885ads_pins[i];
> + cpm1_set_pin(pin->port, pin->pin, pin->flags);
> + }
>
> - setbits32(&cp->cp_pepar, 0x00000003);
> - setbits32(&cp->cp_pedir, 0x00000003);
> - clrbits32(&cp->cp_peso, 0x00000003);
> - clrbits32(&cp->cp_cptr, 0x00000100);
> + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
> + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
> + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
> + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
>
> - immr_unmap(io_port);
> - immr_unmap(cp);
> + /* Set FEC1 and FEC2 to MII mode */
> + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
> }
>
> -static void init_fec2_ioports(struct fs_platform_info *ptr)
> +static void __init mpc885ads_setup_arch(void)
> {
> - cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
> - iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
> -
> - /* configure FEC2 pins */
> - setbits32(&cp->cp_pepar, 0x0003fffc);
> - setbits32(&cp->cp_pedir, 0x0003fffc);
> - clrbits32(&cp->cp_peso, 0x000087fc);
> - setbits32(&cp->cp_peso, 0x00037800);
> - clrbits32(&cp->cp_cptr, 0x00000080);
> -
> - immr_unmap(io_port);
> - immr_unmap(cp);
> -}
> + struct device_node *np;
>
> -void init_fec_ioports(struct fs_platform_info *fpi)
> -{
> - int fec_no = fs_get_fec_index(fpi->fs_no);
> + cpm_reset();
> + init_ioports();
>
> - switch (fec_no) {
> - case 0:
> - init_fec1_ioports(fpi);
> - break;
> - case 1:
> - init_fec2_ioports(fpi);
> - break;
> - default:
> - printk(KERN_ERR "init_fec_ioports: invalid FEC
> number\n");
> + np = of_find_compatible_node(NULL, NULL,
> "fsl,mpc885ads-bcsr");
> + if (!np) {
> + printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr
> node\n"); return;
> }
> -}
>
> -static void init_scc3_ioports(struct fs_platform_info *fpi)
> -{
> - unsigned *bcsr_io;
> - iop8xx_t *io_port;
> - cpm8xx_t *cp;
> + bcsr = of_iomap(np, 0);
> + bcsr5 = of_iomap(np, 1);
> + of_node_put(np);
>
> - bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
> - io_port = (iop8xx_t *) immr_map(im_ioport);
> - cp = (cpm8xx_t *) immr_map(im_cpm);
> -
> - if (bcsr_io == NULL) {
> + if (!bcsr || !bcsr5) {
> printk(KERN_CRIT "Could not remap BCSR\n");
> return;
> }
>
> - /* Enable the PHY.
> - */
> - clrbits32(bcsr_io + 4, BCSR4_ETH10_RST);
> - udelay(1000);
> - setbits32(bcsr_io + 4, BCSR4_ETH10_RST);
> - /* Configure port A pins for Txd and Rxd.
> - */
> - setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
> - clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
> + clrbits32(&bcsr[1], BCSR1_RS232EN_1);
> +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
> + setbits32(&bcsr[1], BCSR1_RS232EN_2);
> +#else
> + clrbits32(&bcsr[1], BCSR1_RS232EN_2);
> +#endif
>
> - /* Configure port C pins to enable CLSN and RENA.
> - */
> - clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
> - clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
> - setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
> + clrbits32(bcsr5, BCSR5_MII1_EN);
> + setbits32(bcsr5, BCSR5_MII1_RST);
> + udelay(1000);
> + clrbits32(bcsr5, BCSR5_MII1_RST);
>
> - /* Configure port E for TCLK and RCLK.
> - */
> - setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
> - clrbits32(&cp->cp_pepar, PE_ENET_TENA);
> - clrbits32(&cp->cp_pedir, PE_ENET_TCLK | PE_ENET_RCLK |
> PE_ENET_TENA);
> - clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
> - setbits32(&cp->cp_peso, PE_ENET_TENA);
> -
> - /* Configure Serial Interface clock routing.
> - * First, clear all SCC bits to zero, then set the ones we
> want.
> - */
> - clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
> - setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
> +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
> + clrbits32(bcsr5, BCSR5_MII2_EN);
> + setbits32(bcsr5, BCSR5_MII2_RST);
> + udelay(1000);
> + clrbits32(bcsr5, BCSR5_MII2_RST);
> +#else
> + setbits32(bcsr5, BCSR5_MII2_EN);
> +#endif
>
> - /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3
> eternet are used.
> - */
> - clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
> - /* On the MPC885ADS SCC ethernet PHY is initialized in the
> full duplex mode
> - * by H/W setting after reset. SCC ethernet controller
> support only half duplex.
> - * This discrepancy of modes causes a lot of carrier lost
> errors.
> - */
> +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> + clrbits32(&bcsr[4], BCSR4_ETH10_RST);
> + udelay(1000);
> + setbits32(&bcsr[4], BCSR4_ETH10_RST);
>
> - /* In the original SCC enet driver the following code is
> placed at
> - the end of the initialization */
> - setbits32(&cp->cp_pepar, PE_ENET_TENA);
> - clrbits32(&cp->cp_pedir, PE_ENET_TENA);
> - setbits32(&cp->cp_peso, PE_ENET_TENA);
> + setbits32(&bcsr[1], BCSR1_ETHEN);
>
> - setbits32(bcsr_io + 4, BCSR1_ETHEN);
> - iounmap(bcsr_io);
> - immr_unmap(io_port);
> - immr_unmap(cp);
> -}
> + np =
> of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80"); +#else
> + np =
> of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40"); +#endif
>
> -void init_scc_ioports(struct fs_platform_info *fpi)
> -{
> - int scc_no = fs_get_scc_index(fpi->fs_no);
> + /* The SCC3 enet registers overlap the SMC1 registers, so
> + * one of the two must be removed from the device tree.
> + */
>
> - switch (scc_no) {
> - case 2:
> - init_scc3_ioports(fpi);
> - break;
> - default:
> - printk(KERN_ERR "init_scc_ioports: invalid SCC
> number\n");
> - return;
> + if (np) {
> + of_detach_node(np);
> + of_node_put(np);
> }
> -}
> -
> -static void init_smc1_uart_ioports(struct fs_uart_platform_info *ptr)
> -{
> - unsigned *bcsr_io;
> - cpm8xx_t *cp;
> -
> - cp = (cpm8xx_t *) immr_map(im_cpm);
> - setbits32(&cp->cp_pepar, 0x000000c0);
> - clrbits32(&cp->cp_pedir, 0x000000c0);
> - clrbits32(&cp->cp_peso, 0x00000040);
> - setbits32(&cp->cp_peso, 0x00000080);
> - immr_unmap(cp);
> -
> - bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
>
> - if (bcsr_io == NULL) {
> - printk(KERN_CRIT "Could not remap BCSR1\n");
> - return;
> - }
> - clrbits32(bcsr_io, BCSR1_RS232EN_1);
> - iounmap(bcsr_io);
> +#ifdef CONFIG_PCMCIA_M8XX
> + /* Set up board specific hook-ups.*/
> + m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
> + m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
> +#endif
> }
>
> -static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi)
> +static int __init mpc885ads_probe(void)
> {
> - unsigned *bcsr_io;
> - cpm8xx_t *cp;
> -
> - cp = (cpm8xx_t *) immr_map(im_cpm);
> - setbits32(&cp->cp_pepar, 0x00000c00);
> - clrbits32(&cp->cp_pedir, 0x00000c00);
> - clrbits32(&cp->cp_peso, 0x00000400);
> - setbits32(&cp->cp_peso, 0x00000800);
> - immr_unmap(cp);
> -
> - bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> -
> - if (bcsr_io == NULL) {
> - printk(KERN_CRIT "Could not remap BCSR1\n");
> - return;
> - }
> - clrbits32(bcsr_io, BCSR1_RS232EN_2);
> - iounmap(bcsr_io);
> + unsigned long root = of_get_flat_dt_root();
> + return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
> }
>
> -void init_smc_ioports(struct fs_uart_platform_info *data)
> -{
> - int smc_no = fs_uart_id_fsid2smc(data->fs_no);
> -
> - switch (smc_no) {
> - case 0:
> - init_smc1_uart_ioports(data);
> - data->brg = data->clk_rx;
> - break;
> - case 1:
> - init_smc2_uart_ioports(data);
> - data->brg = data->clk_rx;
> - break;
> - default:
> - printk(KERN_ERR "init_scc_ioports: invalid SCC
> number\n");
> - return;
> - }
> -}
> +static struct of_device_id __initdata of_bus_ids[] = {
> + { .name = "soc", },
> + { .name = "cpm", },
> + { .name = "chipselect", },
> + {},
> +};
>
> -int platform_device_skip(const char *model, int id)
> +static int __init declare_of_platform_devices(void)
> {
> -#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
> - const char *dev = "FEC";
> - int n = 2;
> -#else
> - const char *dev = "SCC";
> - int n = 3;
> -#endif
> -
> - if (!strcmp(model, dev) && n == id)
> - return 1;
> + /* Publish the QE devices */
> + if (machine_is(mpc885_ads))
> + of_platform_bus_probe(NULL, of_bus_ids, NULL);
>
> return 0;
> }
> -
> -static void __init mpc885ads_setup_arch(void)
> -{
> - cpm_reset();
> -
> - mpc885ads_board_setup();
> -
> - ROOT_DEV = Root_NFS;
> -}
> -
> -static int __init mpc885ads_probe(void)
> -{
> - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
> - "model", NULL);
> - if (model == NULL)
> - return 0;
> - if (strcmp(model, "MPC885ADS"))
> - return 0;
> -
> - return 1;
> -}
> -
> -define_machine(mpc885_ads)
> -{
> -.name = "MPC885 ADS",.probe = mpc885ads_probe,.setup_arch =
> - mpc885ads_setup_arch,.init_IRQ =
> - m8xx_pic_init,.get_irq =
> - mpc8xx_get_irq,.restart = mpc8xx_restart,.calibrate_decr
> =
> - mpc8xx_calibrate_decr,.set_rtc_time =
> - mpc8xx_set_rtc_time,.get_rtc_time =
> mpc8xx_get_rtc_time,}; +device_initcall(declare_of_platform_devices);
> +
> +define_machine(mpc885_ads) {
> + .name = "Freescale MPC885 ADS",
> + .probe = mpc885ads_probe,
> + .setup_arch = mpc885ads_setup_arch,
> + .init_IRQ = m8xx_pic_init,
> + .get_irq = mpc8xx_get_irq,
> + .restart = mpc8xx_restart,
> + .calibrate_decr = mpc8xx_calibrate_decr,
> + .set_rtc_time = mpc8xx_set_rtc_time,
> + .get_rtc_time = mpc8xx_get_rtc_time,
> + .progress = udbg_progress,
> +};
> +
> +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> +u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)0xff002808;
> +#endif
--
Sincerely, Vitaly
next prev parent reply other threads:[~2007-08-30 20:08 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-28 20:11 [PATCH v3 1/8] Generic bitbanged MDIO library Scott Wood
2007-08-28 20:14 ` [PATCH v3 2/8] fs_enet: Whitespace cleanup Scott Wood
2007-08-28 20:14 ` [PATCH v3 3/8] fs_enet: Include linux/string.h from linux/fs_enet_pd.h Scott Wood
2007-08-28 20:14 ` [PATCH v3 4/8] fs_enet: Don't share the interrupt Scott Wood
2007-08-28 20:14 ` [PATCH v3 5/8] fs_enet: mac-fcc: Eliminate __fcc-* macros Scott Wood
2007-08-28 20:14 ` [PATCH v3 6/8] fs_enet: Align receive buffers Scott Wood
2007-08-28 20:14 ` [PATCH v3 7/8] fs_enet: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set Scott Wood
2007-08-28 20:14 ` [PATCH v3 8/8] fs_enet: sparse fixes Scott Wood
2007-08-28 20:16 ` [PATCH 1/3] fsl_soc.c cleanup Scott Wood
2007-08-29 5:30 ` David Gibson
2007-09-11 5:35 ` Kumar Gala
2007-09-11 13:57 ` Scott Wood
2007-09-11 15:48 ` Kumar Gala
2007-09-11 15:51 ` Scott Wood
2007-09-11 16:22 ` Kumar Gala
2007-09-11 16:24 ` Scott Wood
2007-09-11 16:45 ` SOC registers/immr determination from device tree (was Re: [PATCH 1/3] fsl_soc.c cleanup) Kumar Gala
2007-09-11 17:03 ` Scott Wood
2007-09-11 17:08 ` Josh Boyer
2007-09-11 17:54 ` Kumar Gala
2007-08-28 20:16 ` [PATCH 2/3] Introduce new CPM device bindings Scott Wood
2007-08-29 5:39 ` David Gibson
2007-08-29 13:58 ` Scott Wood
2007-08-30 0:55 ` David Gibson
2007-08-30 5:48 ` Scott Wood
2007-08-30 5:58 ` David Gibson
2007-08-30 14:10 ` Scott Wood
2007-08-31 2:48 ` David Gibson
2007-08-28 20:16 ` [PATCH 3/3] Add early debug console for CPM serial ports Scott Wood
2007-08-29 5:45 ` David Gibson
2007-08-29 14:02 ` Scott Wood
2007-08-29 19:58 ` Scott Wood
2007-08-30 0:58 ` David Gibson
2007-08-30 0:57 ` David Gibson
2007-08-28 20:16 ` [PATCH 1/4] ppc: Add clrbits8 and setbits8 Scott Wood
2007-08-28 20:16 ` [PATCH 2/4] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set Scott Wood
2007-08-28 20:16 ` [PATCH 3/4] cpm_uart: sparse fixes Scott Wood
2007-08-28 20:16 ` [PATCH 4/4] cpm_uart: Issue STOP_TX command before initializing console Scott Wood
2007-08-28 20:17 ` [PATCH 1/9] 8xx: Fix CONFIG_PIN_TLB Scott Wood
2007-08-29 21:09 ` Vitaly Bordug
2007-08-28 20:17 ` [PATCH 2/9] 8xx: Infrastructure code cleanup Scott Wood
2007-09-13 7:11 ` David Gibson
2007-09-13 8:16 ` Vitaly Bordug
2007-09-14 4:09 ` David Gibson
2007-09-14 8:21 ` Vitaly Bordug
2007-09-15 2:25 ` David Gibson
2007-09-13 14:40 ` Scott Wood
2007-08-28 20:17 ` [PATCH 3/9] 8xx: Add pin and clock setting functions Scott Wood
2007-08-29 21:38 ` Vitaly Bordug
2007-08-31 20:44 ` Scott Wood
2007-09-05 7:39 ` Vitaly Bordug
2007-09-05 17:37 ` Scott Wood
2007-08-28 20:17 ` [PATCH 4/9] 8xx: Work around CPU15 erratum Scott Wood
2007-08-28 20:17 ` [PATCH 5/9] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation Scott Wood
2007-08-28 20:17 ` [PATCH 6/9] 8xx: Set initial memory limit John Traill
2007-08-28 20:19 ` Scott Wood
2007-08-28 20:19 ` [PATCH 7/9] 8xx: mpc885ads cleanup Scott Wood
2007-08-29 22:03 ` Vitaly Bordug [this message]
2007-08-28 20:19 ` [PATCH 8/9] 8xx: Embedded Planet EP88xC support Scott Wood
2007-08-28 20:19 ` [PATCH 9/9] 8xx: Adder 875 support Scott Wood
2007-08-28 20:19 ` [PATCH 1/9] cpm2: Infrastructure code cleanup Scott Wood
2007-08-28 20:19 ` [PATCH 2/9] cpm2: Fix off-by-one error in setbrg() Scott Wood
2007-08-29 22:09 ` Vitaly Bordug
2007-08-30 20:13 ` Scott Wood
2007-08-30 21:52 ` Vitaly Bordug
2007-08-28 20:19 ` [PATCH 3/9] cpm2: Add SCCs to cpm2_clk_setup(), and cpm2_smc_clk_setup() Scott Wood
2007-08-29 22:25 ` Vitaly Bordug
2007-08-30 20:15 ` Scott Wood
2007-09-04 20:43 ` Vitaly Bordug
2007-08-28 20:19 ` [PATCH 4/9] cpm2: Add cpm2_set_pin() Scott Wood
2007-09-04 20:51 ` Vitaly Bordug
2007-08-28 20:19 ` [PATCH 5/9] mpc82xx: Remove a bunch of cruft that duplicates generic functionality Scott Wood
2007-08-28 20:19 ` [PATCH 6/9] mpc82xx: Rename mpc82xx_ads to mpc8272_ads Scott Wood
2007-08-29 5:55 ` David Gibson
2007-08-28 20:19 ` [PATCH 7/9] mpc8272ads: Change references from 82xx_ADS to 8272_ADS Scott Wood
2007-08-28 20:19 ` [PATCH 8/9] mpc82xx: Update mpc8272ads, and factor out PCI and reset Scott Wood
2007-08-29 22:41 ` Kumar Gala
2007-08-30 5:56 ` Scott Wood
2007-08-30 14:56 ` Kumar Gala
2007-08-30 15:17 ` Scott Wood
2007-08-28 20:19 ` [PATCH 9/9] mpc82xx: Add pq2fads board support Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2007-09-05 19:27 [PATCH 1/9] 8xx: Fix CONFIG_PIN_TLB Scott Wood
2007-09-05 19:28 ` [PATCH 7/9] 8xx: mpc885ads cleanup Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070830020340.2e93ed6a@localhost.localdomain \
--to=vitb@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.