From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 6/13] ide: add IDE_HFLAG_SERIALIZE host flag
Date: Wed, 5 Sep 2007 23:53:28 +0200 [thread overview]
Message-ID: <200709052353.28577.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set
hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers
to use it.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/aec62xx.c | 10 +++++-----
drivers/ide/pci/cs5530.c | 7 +++----
drivers/ide/pci/sc1200.c | 7 +++----
drivers/ide/setup-pci.c | 3 +++
include/linux/ide.h | 2 ++
5 files changed, 16 insertions(+), 13 deletions(-)
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -187,11 +187,9 @@ static void __devinit init_hwif_aec62xx(
hwif->set_pio_mode = &aec_set_pio_mode;
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
- if(hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
+ if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
- } else
+ else
hwif->set_dma_mode = &aec6260_set_mode;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
@@ -219,7 +217,9 @@ static ide_pci_device_t aec62xx_chipsets
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -245,9 +245,6 @@ static void __devinit init_hwif_cs5530 (
unsigned long basereg;
u32 d0_timings;
- if (hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
-
hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->set_dma_mode = &cs5530_set_dma_mode;
@@ -271,7 +268,9 @@ static ide_pci_device_t cs5530_chipset _
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
- .host_flags = IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -362,9 +362,6 @@ static int sc1200_resume (struct pci_dev
*/
static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
{
- if (hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
-
hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->set_dma_mode = &sc1200_set_dma_mode;
@@ -381,7 +378,9 @@ static void __devinit init_hwif_sc1200 (
static ide_pci_device_t sc1200_chipset __devinitdata = {
.name = "SC1200",
.init_hwif = init_hwif_sc1200,
- .host_flags = IDE_HFLAG_ABUSE_DMA_MODES | IDE_HFLAG_POST_SET_MODE |
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_ABUSE_DMA_MODES |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -565,6 +565,9 @@ void ide_pci_setup_ports(struct pci_dev
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
+ if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
+ hwif->mate->serialized = hwif->serialized = 1;
+
if (hwif->dma_base) {
hwif->swdma_mask = d->swdma_mask;
hwif->mwdma_mask = d->mwdma_mask;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1262,6 +1262,8 @@ enum {
IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
/* data FIFO is cleared by an error */
IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
+ /* serialize ports */
+ IDE_HFLAG_SERIALIZE = (1 << 20),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
reply other threads:[~2007-09-05 21:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709052353.28577.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.