From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 7/13] ide: add IDE_HFLAG_LEGACY_IRQS host flag
Date: Wed, 5 Sep 2007 23:54:03 +0200 [thread overview]
Message-ID: <200709052354.03098.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.
While at it:
* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/atiixp.c | 8 +++-----
drivers/ide/pci/piix.c | 24 ++++++++++--------------
drivers/ide/pci/serverworks.c | 15 +++++++--------
drivers/ide/pci/sis5513.c | 6 ++----
drivers/ide/pci/slc90e66.c | 5 +----
drivers/ide/setup-pci.c | 3 +++
include/linux/ide.h | 2 ++
7 files changed, 28 insertions(+), 35 deletions(-)
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -172,9 +172,6 @@ static void __devinit init_hwif_atiixp(i
u8 ch = hwif->channel;
struct pci_dev *pdev = hwif->pci_dev;
- if (!hwif->irq)
- hwif->irq = ch ? 15 : 14;
-
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
hwif->drives[0].autotune = 1;
@@ -200,7 +197,7 @@ static ide_pci_device_t atiixp_pci_info[
.name = "ATIIXP",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -208,7 +205,8 @@ static ide_pci_device_t atiixp_pci_info[
.name = "SB600_PATA",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -341,16 +341,6 @@ static u8 __devinit piix_cable_detect(id
static void __devinit init_hwif_piix(ide_hwif_t *hwif)
{
-#ifndef CONFIG_IA64
- if (!hwif->irq)
- hwif->irq = hwif->channel ? 15 : 14;
-#endif /* CONFIG_IA64 */
-
- if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
- /* This is a painful system best to let it self tune for now */
- return;
- }
-
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->set_dma_mode = &piix_set_dma_mode;
@@ -378,12 +368,18 @@ static void __devinit init_hwif_ich(ide_
hwif->ide_dma_clear_irq = &piix_dma_clear_irq;
}
+#ifndef CONFIG_IA64
+ #define IDE_HFLAGS_PIIX (IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE)
+#else
+ #define IDE_HFLAGS_PIIX IDE_HFLAG_BOOTABLE
+#endif
+
#define DECLARE_PIIX_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_hwif = init_hwif_piix, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .host_flags = IDE_HFLAG_BOOTABLE, \
+ .host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
.mwdma_mask = ATA_MWDMA12_ONLY, \
@@ -396,7 +392,7 @@ static void __devinit init_hwif_ich(ide_
.init_chipset = init_chipset_ich, \
.init_hwif = init_hwif_ich, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .host_flags = IDE_HFLAG_BOOTABLE, \
+ .host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
.mwdma_mask = ATA_MWDMA12_ONLY, \
@@ -414,11 +410,11 @@ static ide_pci_device_t piix_pci_info[]
* of the bit 14 of the IDETIM register at offset 0x6c
*/
.name = "MPIIX",
- .init_hwif = init_hwif_piix,
.enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
.host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
- IDE_HFLAG_BOOTABLE,
+ IDE_HFLAGS_PIIX,
.pio_mask = ATA_PIO4,
+ /* This is a painful system best to let it self tune for now */
},
/* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */
Index: b/drivers/ide/pci/serverworks.c
===================================================================
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -359,9 +359,6 @@ static u8 __devinit ata66_svwks(ide_hwif
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
- if (!hwif->irq)
- hwif->irq = hwif->channel ? 15 : 14;
-
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
@@ -383,7 +380,7 @@ static ide_pci_device_t serverworks_chip
.name = "SvrWks OSB4",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* UDMA is problematic on OSB4 */
@@ -391,7 +388,7 @@ static ide_pci_device_t serverworks_chip
.name = "SvrWks CSB5",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -399,7 +396,7 @@ static ide_pci_device_t serverworks_chip
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -407,7 +404,8 @@ static ide_pci_device_t serverworks_chip
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
@@ -415,7 +413,8 @@ static ide_pci_device_t serverworks_chip
.name = "SvrWks HT1000",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -564,9 +564,6 @@ static void __devinit init_hwif_sis5513
{
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
- if (!hwif->irq)
- hwif->irq = hwif->channel ? 15 : 14;
-
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->set_dma_mode = &sis_set_dma_mode;
@@ -590,7 +587,8 @@ static ide_pci_device_t sis5513_chipset
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .host_flags = IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
};
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -133,9 +133,6 @@ static void __devinit init_hwif_slc90e66
u8 reg47 = 0;
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
- if (!hwif->irq)
- hwif->irq = hwif->channel ? 15 : 14;
-
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
@@ -156,7 +153,7 @@ static ide_pci_device_t slc90e66_chipset
.name = "SLC90E66",
.init_hwif = init_hwif_slc90e66,
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
- .host_flags = IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.swdma_mask = ATA_SWDMA2_ONLY,
.mwdma_mask = ATA_MWDMA12_ONLY,
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -562,6 +562,9 @@ void ide_pci_setup_ports(struct pci_dev
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(dev, d, hwif);
+ if ((d->host_flags & IDE_HFLAG_LEGACY_IRQS) && hwif->irq == 0)
+ hwif->irq = port ? 15 : 14;
+
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1264,6 +1264,8 @@ enum {
IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
/* serialize ports */
IDE_HFLAG_SERIALIZE = (1 << 20),
+ /* use legacy IRQs */
+ IDE_HFLAG_LEGACY_IRQS = (1 << 21),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
next reply other threads:[~2007-09-05 21:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-05 21:54 Bartlomiej Zolnierkiewicz [this message]
2007-10-09 20:20 ` [PATCH 7/13] ide: add IDE_HFLAG_LEGACY_IRQS host flag Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709052354.03098.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.