From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
To: gregkh@suse.de, linux-usb-users@lists.sourceforge.net,
linux-usb-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Subject: [PATCH 1/2] ELAN U132 Host Controller Driver: convert sw_lock to mutex
Date: Thu, 6 Sep 2007 23:18:15 +0200 [thread overview]
Message-ID: <20070906211815.GD3081@traven> (raw)
In-Reply-To: <20070906210922.GC3081@traven>
The ELAN U132 Host Controller Driver uses the semaphore sw_lock as
mutex. Use the mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index b88eb3c..1201ca4 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -184,7 +184,7 @@ struct u132_ring {
struct u132 {
struct kref kref;
struct list_head u132_list;
- struct semaphore sw_lock;
+ struct mutex sw_lock;
struct semaphore scheduler_lock;
struct u132_platform_data *board;
struct platform_device *platform_dev;
@@ -493,20 +493,20 @@ static void u132_hcd_monitor_work(struct work_struct *work)
return;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = read_roothub_info(u132);
if (retval) {
struct usb_hcd *hcd = u132_to_hcd(u132);
u132_disable(u132);
u132->going = 1;
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_hc_died(hcd);
ftdi_elan_gone_away(u132->platform_dev);
u132_monitor_put_kref(u132);
return;
} else {
u132_monitor_requeue_work(u132, 500);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
}
@@ -1805,10 +1805,10 @@ static void u132_hcd_stop(struct usb_hcd *hcd)
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
} else {
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(100);
u132_power(u132, 0);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
}
}
@@ -1830,7 +1830,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
(pdev->dev.platform_data))->vendor;
u16 device = ((struct u132_platform_data *)
(pdev->dev.platform_data))->device;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(10);
if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
u132->flags = OHCI_QUIRK_AMD756;
@@ -1845,7 +1845,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
u132->going = 1;
}
msleep(100);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
} else {
dev_err(&u132->platform_dev->dev, "platform_device missing\n");
@@ -1865,13 +1865,13 @@ static int u132_hcd_reset(struct usb_hcd *hcd)
return -ESHUTDOWN;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = u132_init(u132);
if (retval) {
u132_disable(u132);
u132->going = 1;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
@@ -2805,7 +2805,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
return -ESHUTDOWN;
} else {
int retval = 0;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
@@ -2868,7 +2868,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
stall:retval = -EPIPE;
break;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
@@ -3004,7 +3004,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
dev_err(&u132->platform_dev->dev, "removing device u132"
".%d\n", u132->sequence_num);
msleep(100);
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
u132_monitor_cancel_work(u132);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3017,7 +3017,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
u132->going += 1;
printk(KERN_INFO "removing device u132.%d\n",
u132->sequence_num);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_remove_hcd(hcd);
u132_u132_put_kref(u132);
return 0;
@@ -3037,7 +3037,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
u132->platform_dev = pdev;
u132->power = 0;
u132->reset = 0;
- init_MUTEX(&u132->sw_lock);
+ mutex_init(&u132->sw_lock);
init_MUTEX(&u132->scheduler_lock);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3047,7 +3047,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
ring->curr_endp = NULL;
INIT_DELAYED_WORK(&ring->scheduler,
u132_hcd_ring_work_scheduler);
- } down(&u132->sw_lock);
+ } mutex_lock(&u132->sw_lock);
INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
while (ports-- > 0) {
struct u132_port *port = &u132->port[ports];
@@ -3077,7 +3077,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
while (endps-- > 0) {
u132->endp[endps] = NULL;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
If you don't know where you are going,
you will probably end up somewhere else
(Laurence J. Peter)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
next prev parent reply other threads:[~2007-09-06 21:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-06 21:09 [PATCH 0/2] Use mutexes instead of semaphores in the ELAN U132 Host Controller Driver Matthias Kaehlcke
2007-09-06 21:18 ` Matthias Kaehlcke [this message]
2007-09-06 22:08 ` [PATCH 1/2] ELAN U132 Host Controller Driver: convert sw_lock to mutex Oleg Verych
2007-09-07 6:14 ` Matthias Kaehlcke
2007-09-06 21:19 ` [PATCH 2/2] ELAN U132 Host Controller Driver: convert scheduler_lock " Matthias Kaehlcke
2007-09-07 13:10 ` Matthias Kaehlcke
2007-09-09 16:41 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070906211815.GD3081@traven \
--to=matthias.kaehlcke@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=linux-usb-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.