From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 8/10] ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flag
Date: Tue, 11 Sep 2007 23:40:21 +0200 [thread overview]
Message-ID: <200709112340.21552.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports()
to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI
and via82cxxx host drivers to use it.
While at it:
* Add IDE_HFLAGS_UMC define (generic IDE PCI host driver).
* Remove no longer needed init_hwif_generic() (generic IDE PCI host driver).
* Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/generic.c | 27 ++++++---------------------
drivers/ide/pci/via82cxxx.c | 20 +++++++++++---------
drivers/ide/setup-pci.c | 3 ++-
include/linux/ide.h | 2 ++
4 files changed, 21 insertions(+), 31 deletions(-)
Index: b/drivers/ide/pci/generic.c
===================================================================
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -54,25 +54,13 @@ __setup("all-generic-ide", ide_generic_a
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
-static void __devinit init_hwif_generic (ide_hwif_t *hwif)
-{
- switch(hwif->pci_dev->device) {
- case PCI_DEVICE_ID_UMC_UM8673F:
- case PCI_DEVICE_ID_UMC_UM8886A:
- case PCI_DEVICE_ID_UMC_UM8886BF:
- hwif->irq = hwif->channel ? 15 : 14;
- break;
- default:
- break;
- }
-}
+#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS)
-#define DECLARE_GENERIC_PCI_DEV(name_str, dma_setting) \
+#define DECLARE_GENERIC_PCI_DEV(name_str, extra_flags) \
{ \
.name = name_str, \
- .init_hwif = init_hwif_generic, \
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
- dma_setting | \
+ extra_flags | \
IDE_HFLAG_BOOTABLE, \
}
@@ -81,7 +69,6 @@ static ide_pci_device_t generic_chipsets
{ /* 1 */
.name = "NS87410",
- .init_hwif = init_hwif_generic,
.enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}},
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_BOOTABLE,
@@ -92,16 +79,15 @@ static ide_pci_device_t generic_chipsets
/* 2 */ DECLARE_GENERIC_PCI_DEV("SAMURAI", 0),
/* 3 */ DECLARE_GENERIC_PCI_DEV("HT6565", 0),
- /* 4 */ DECLARE_GENERIC_PCI_DEV("UM8673F", IDE_HFLAG_NO_DMA),
- /* 5 */ DECLARE_GENERIC_PCI_DEV("UM8886A", IDE_HFLAG_NO_DMA),
- /* 6 */ DECLARE_GENERIC_PCI_DEV("UM8886BF", IDE_HFLAG_NO_DMA),
+ /* 4 */ DECLARE_GENERIC_PCI_DEV("UM8673F", IDE_HFLAGS_UMC),
+ /* 5 */ DECLARE_GENERIC_PCI_DEV("UM8886A", IDE_HFLAGS_UMC),
+ /* 6 */ DECLARE_GENERIC_PCI_DEV("UM8886BF", IDE_HFLAGS_UMC),
/* 7 */ DECLARE_GENERIC_PCI_DEV("HINT_IDE", 0),
/* 8 */ DECLARE_GENERIC_PCI_DEV("VIA_IDE", IDE_HFLAG_NO_AUTODMA),
/* 9 */ DECLARE_GENERIC_PCI_DEV("OPTI621V", IDE_HFLAG_NO_AUTODMA),
{ /* 10 */
.name = "VIA8237SATA",
- .init_hwif = init_hwif_generic,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
@@ -115,7 +101,6 @@ static ide_pci_device_t generic_chipsets
{ /* 14 */
.name = "Revolution",
- .init_hwif = init_hwif_generic,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -427,12 +427,6 @@ static void __devinit init_hwif_via82cxx
hwif->set_pio_mode = &via_set_pio_mode;
hwif->set_dma_mode = &via_set_drive;
-#ifdef CONFIG_PPC_CHRP
- if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
- hwif->irq = hwif->channel ? 15 : 14;
- }
-#endif
-
for (i = 0; i < 2; i++) {
hwif->drives[i].io_32bit = 1;
hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
@@ -441,8 +435,6 @@ static void __devinit init_hwif_via82cxx
if (!hwif->dma_base)
return;
- hwif->ultra_mask = vdev->via_config->udma_mask;
-
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = via82cxxx_cable_detect(hwif);
}
@@ -478,8 +470,10 @@ static ide_pci_device_t via82cxxx_chipse
static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
+ ide_pci_device_t *d = &via82cxxx_chipsets[id->driver_data];
struct pci_dev *isa = NULL;
struct via_isa_bridge *via_config;
+
/*
* Find the ISA bridge and check we know what it is.
*/
@@ -489,7 +483,15 @@ static int __devinit via_init_one(struct
printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
return -ENODEV;
}
- return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
+
+#ifdef CONFIG_PPC_CHRP
+ if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
+ d->host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
+ d->udma_mask = via_config->udma_mask;
+
+ return ide_setup_pci_device(dev, d);
}
static const struct pci_device_id via_pci_tbl[] = {
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -563,7 +563,8 @@ void ide_pci_setup_ports(struct pci_dev
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(dev, d, hwif);
- if ((d->host_flags & IDE_HFLAG_LEGACY_IRQS) && hwif->irq == 0)
+ if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
+ (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
hwif->host_flags = d->host_flags;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1268,6 +1268,8 @@ enum {
IDE_HFLAG_SERIALIZE = (1 << 20),
/* use legacy IRQs */
IDE_HFLAG_LEGACY_IRQS = (1 << 21),
+ /* force use of legacy IRQs */
+ IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
reply other threads:[~2007-09-11 21:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709112340.21552.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.