From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 10/10] ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flags
Date: Tue, 11 Sep 2007 23:42:08 +0200 [thread overview]
Message-ID: <200709112342.09074.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports()
to set drive->{io_32bit,unmask} for both drives on the interface. Convert
amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags.
While at it:
* Add IDE_HFLAGS_AMD define (amd74xx host driver).
* Add IDE_HFLAGS_VIA define (via82cxxx host driver).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/amd74xx.c | 25 ++++++++++---------------
drivers/ide/pci/sl82c105.c | 12 ++++--------
drivers/ide/pci/via82cxxx.c | 31 ++++++++++++++-----------------
drivers/ide/setup-pci.c | 10 ++++++++++
include/linux/ide.h | 4 ++++
5 files changed, 42 insertions(+), 40 deletions(-)
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -242,19 +242,12 @@ static unsigned int __devinit init_chips
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
- int i;
-
if (hwif->irq == 0) /* 0 is bogus but will do for now */
hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
- for (i = 0; i < 2; i++) {
- hwif->drives[i].io_32bit = 1;
- hwif->drives[i].unmask = 1;
- }
-
if (!hwif->dma_base)
return;
@@ -270,16 +263,21 @@ static void __devinit init_hwif_amd74xx(
}
}
+#define IDE_HFLAGS_AMD \
+ (IDE_HFLAG_PIO_NO_BLACKLIST | \
+ IDE_HFLAG_PIO_NO_DOWNGRADE | \
+ IDE_HFLAG_POST_SET_MODE | \
+ IDE_HFLAG_IO_32BIT | \
+ IDE_HFLAG_UNMASK_IRQS | \
+ IDE_HFLAG_BOOTABLE)
+
#define DECLARE_AMD_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | \
- IDE_HFLAG_PIO_NO_DOWNGRADE | \
- IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_BOOTABLE, \
+ .host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
@@ -291,10 +289,7 @@ static void __devinit init_hwif_amd74xx(
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | \
- IDE_HFLAG_PIO_NO_DOWNGRADE | \
- IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_BOOTABLE, \
+ .host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -361,13 +361,6 @@ static void __devinit init_hwif_sl82c105
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
- /*
- * We support 32-bit I/O on this interface, and
- * it doesn't have problems with interrupts.
- */
- hwif->drives[0].io_32bit = hwif->drives[1].io_32bit = 1;
- hwif->drives[0].unmask = hwif->drives[1].unmask = 1;
-
if (!hwif->dma_base)
return;
@@ -399,7 +392,10 @@ static ide_pci_device_t sl82c105_chipset
.init_chipset = init_chipset_sl82c105,
.init_hwif = init_hwif_sl82c105,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
- .host_flags = IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAG_IO_32BIT |
+ IDE_HFLAG_UNMASK_IRQS |
+ IDE_HFLAG_NO_AUTODMA |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
};
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -421,17 +421,9 @@ static u8 __devinit via82cxxx_cable_dete
static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
{
- struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
- int i;
-
hwif->set_pio_mode = &via_set_pio_mode;
hwif->set_dma_mode = &via_set_drive;
- for (i = 0; i < 2; i++) {
- hwif->drives[i].io_32bit = 1;
- hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
- }
-
if (!hwif->dma_base)
return;
@@ -439,17 +431,20 @@ static void __devinit init_hwif_via82cxx
hwif->cbl = via82cxxx_cable_detect(hwif);
}
+#define IDE_HFLAGS_VIA \
+ (IDE_HFLAG_PIO_NO_BLACKLIST | \
+ IDE_HFLAG_PIO_NO_DOWNGRADE | \
+ IDE_HFLAG_POST_SET_MODE | \
+ IDE_HFLAG_IO_32BIT | \
+ IDE_HFLAG_BOOTABLE)
+
static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
{ /* 0 */
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
- IDE_HFLAG_PIO_NO_DOWNGRADE |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_VIA | IDE_HFLAG_NO_AUTODMA,
.pio_mask = ATA_PIO5,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
@@ -458,10 +453,7 @@ static ide_pci_device_t via82cxxx_chipse
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
- IDE_HFLAG_PIO_NO_DOWNGRADE |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_BOOTABLE,
+ .host_flags = IDE_HFLAGS_VIA,
.pio_mask = ATA_PIO5,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
@@ -484,6 +476,11 @@ static int __devinit via_init_one(struct
return -ENODEV;
}
+ if (via_config->flags & VIA_NO_UNMASK)
+ d->host_flags &= ~IDE_HFLAG_UNMASK_IRQS;
+ else
+ d->host_flags |= IDE_HFLAG_UNMASK_IRQS;
+
#ifdef CONFIG_PPC_CHRP
if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
d->host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -573,6 +573,16 @@ void ide_pci_setup_ports(struct pci_dev
if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
+ if (d->host_flags & IDE_HFLAG_IO_32BIT) {
+ hwif->drives[0].io_32bit = 1;
+ hwif->drives[1].io_32bit = 1;
+ }
+
+ if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) {
+ hwif->drives[0].unmask = 1;
+ hwif->drives[1].unmask = 1;
+ }
+
if (hwif->dma_base) {
hwif->swdma_mask = d->swdma_mask;
hwif->mwdma_mask = d->mwdma_mask;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1272,6 +1272,10 @@ enum {
IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
/* limit LBA48 requests to 256 sectors */
IDE_HFLAG_RQSIZE_256 = (1 << 23),
+ /* use 32-bit I/O ops */
+ IDE_HFLAG_IO_32BIT = (1 << 24),
+ /* unmask IRQs */
+ IDE_HFLAG_UNMASK_IRQS = (1 << 25),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
reply other threads:[~2007-09-11 21:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709112342.09074.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.