Re: [NEWBIE] Interrupt-problem mpc5200

["S. Fricke" <silvio.fricke@googlemail.com>]

[-- Attachment #1: Type: text/plain, Size: 1205 bytes --]

Hello,

> > I have looked up "kernel/irq/manage.c". "-ENOSYS" is returned on function
> > "setup_irq" because the used irq(MPC52xx_IRQ2) is the same as no_irq_chip.
> >
> > THE MPC52xx_IRQ2 is a excerpt from "include/ppc/mpc52xx.h" (per copy
> > paste), but mpc52xx is (now) a powerpc-arch. What is the desired value for
> > IRQ-2 on a mpc5200b?
> 
> The irq number you pass into request_irq is a system-wide irq number;
> it doesn't necessarily map directly onto the MPC52xx irq number.
> Typically, you'd have a node for your device in the device tree which
> has a phandle back to the interrupt node and you would use
> irq_of_parse_and_map() to map it back to a system-wide irq number.

The IRQ-pin-2 belongs to "PIN-configuration-nodes" described in
"booting-without-of.txt"? Than, what is the QE for my MPC5200B?

Can u give me an example with a single IRQ of a configuration-node for a
dts?


TIA:
Silvio

-- 
-- S. Fricke ----------------------------- MAILTO:silvio.fricke@gmail.com --
   Diplom-Informatiker (FH)
   Linux-Entwicklung                       JABBER:      fricke@jabber.org
----------------------------------------------------------------------------


[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]