From: Markus Brunner <super.firetwister@googlemail.com>
To: Paul Mundt <lethal@linux-sh.org>
Cc: Mark Jonas <toertel@gmail.com>,
linux-mtd@lists.infradead.org,
linux-sh <linuxsh-dev@lists.sourceforge.net>
Subject: [PATCH] Magic Panel MTD mapping update
Date: Mon, 17 Sep 2007 12:09:15 +0200 [thread overview]
Message-ID: <200709171209.16148.super.firetwister@gmail.com> (raw)
In-Reply-To: <1187595327.3137.3.camel@shinybook.infradead.org>
Hi Paul,
this update moves the flash mapping for the Magic Panel into the board setup.
It also removes references to the old MTD mapping option in the defconfig.
Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
---
boards/magicpanelr2/setup.c | 83 ++++++++++++++++++++++++++++++++++++++++-
configs/magicpanelr2_defconfig | 8 ++-
2 files changed, 86 insertions(+), 5 deletions(-)
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/magicpanelr2/setup.c
index c593065..854bcc6 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/magicpanelr2/setup.c
@@ -12,14 +12,19 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
#include <asm/magicpanelr2.h>
#include <asm/heartbeat.h>
#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+/* Prefer cmdline over RedBoot */
+static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
+
/* Wait until reset finished. Timeout is 100ms. */
static int __init ethernet_reset_finished(void)
{
@@ -270,13 +275,87 @@ static struct platform_device heartbeat_device = {
.resource = heartbeat_resources,
};
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition mpr2_partitions[] = {
+ /* Reserved for bootloader, read-only */
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000UL,
+ .size = MPR2_MTD_BOOTLOADER_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* Reserved for kernel image */
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MPR2_MTD_KERNEL_SIZE,
+ },
+ /* Rest is used for Flash FS */
+ {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x00000000,
+ .end = 0x2000000UL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+struct map_info mpr2_flash_map = {
+ .name = "Magic Panel R2 Flash",
+ .size = 0x2000000UL,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(){
+ int nr_parts = 0;
+ simple_map_init(&mpr2_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = mpr2_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+/*
+ * Add all resources to the platform_device
+ */
+
static struct platform_device *mpr2_devices[] __initdata = {
&heartbeat_device,
&smc911x_device,
+ &flash_device,
};
+
static int __init mpr2_devices_setup(void)
{
+ set_mtd_partitions();
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
}
device_initcall(mpr2_devices_setup);
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index ce4e764..f8398a5 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -185,7 +185,7 @@ CONFIG_SH_MAGIC_PANEL_R2=y
#
# Magic Panel R2 options
#
-CONFIG_SH_MAGIC_PANEL_R2_VERSION=2
+CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
#
# Timer and clock configuration
@@ -404,9 +404,11 @@ CONFIG_MTD_CFI_UTIL=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_SOLUTIONENGINE is not set
-CONFIG_MTD_MAGICPANELR2=y
# CONFIG_MTD_PLATRAM is not set
#
next prev parent reply other threads:[~2007-09-17 10:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-20 6:37 [PATCH] Magic Panel (SH3-DSP board) MTD mapping Markus Brunner
2007-08-20 7:35 ` David Woodhouse
2007-08-21 20:12 ` Markus Brunner
2007-09-17 10:09 ` Markus Brunner [this message]
2007-09-21 6:25 ` [PATCH] Magic Panel MTD mapping update Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709171209.16148.super.firetwister@gmail.com \
--to=super.firetwister@googlemail.com \
--cc=lethal@linux-sh.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxsh-dev@lists.sourceforge.net \
--cc=toertel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.