All of lore.kernel.org
 help / color / mirror / Atom feed
From: Olof Johansson <olof@lixom.net>
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org
Subject: [PATCH] [5/6] pasemi_mac: don't enable rx before there are buffers on the ring
Date: Wed, 26 Sep 2007 16:24:42 -0500	[thread overview]
Message-ID: <20070926212442.GF24168@lixom.net> (raw)
In-Reply-To: <20070926212200.GA24168@lixom.net>

pasemi_mac: don't enable rx before there are buffers on the ring

Reorder initialization of the DMA channels and the interface. Before there
was a time window when the interface was enabled before DMA was enabled.
Also, now there will always be RX buffers available at the time the
MAC interface is enabled, to avoid temporary out-of-buffer errors for the
very first packets (on busy networks).


Signed-off-by: Olof Johansson <olof@lixom.net>


Index: 2.6.23/drivers/net/pasemi_mac.c
===================================================================
--- 2.6.23.orig/drivers/net/pasemi_mac.c
+++ 2.6.23/drivers/net/pasemi_mac.c
@@ -791,14 +791,6 @@ static int pasemi_mac_open(struct net_de
 
 	write_mac_reg(mac, PAS_MAC_CFG_TXP, flags);
 
-	flags = PAS_MAC_CFG_PCFG_S1 | PAS_MAC_CFG_PCFG_PE |
-		PAS_MAC_CFG_PCFG_PR | PAS_MAC_CFG_PCFG_CE;
-
-	if (mac->type == MAC_TYPE_GMAC)
-		flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
-	else
-		flags |= PAS_MAC_CFG_PCFG_TSR_10G | PAS_MAC_CFG_PCFG_SPD_10G;
-
 	write_iob_reg(mac, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch),
 			   PAS_IOB_DMA_RXCH_CFG_CNTTH(0));
 
@@ -813,8 +805,6 @@ static int pasemi_mac_open(struct net_de
 	write_iob_reg(mac, PAS_IOB_DMA_COM_TIMEOUTCFG,
 			   PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0xffffff));
 
-	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
-
 	ret = pasemi_mac_setup_rx_resources(dev);
 	if (ret)
 		goto out_rx_resources;
@@ -842,6 +832,17 @@ static int pasemi_mac_open(struct net_de
 
 	pasemi_mac_replenish_rx_ring(dev);
 
+	flags = PAS_MAC_CFG_PCFG_S1 | PAS_MAC_CFG_PCFG_PE |
+		PAS_MAC_CFG_PCFG_PR | PAS_MAC_CFG_PCFG_CE;
+
+	if (mac->type == MAC_TYPE_GMAC)
+		flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
+	else
+		flags |= PAS_MAC_CFG_PCFG_TSR_10G | PAS_MAC_CFG_PCFG_SPD_10G;
+
+	/* Enable interface in MAC */
+	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
+
 	ret = pasemi_mac_phy_init(dev);
 	/* Some configs don't have PHYs (XAUI etc), so don't complain about
 	 * failed init due to -ENODEV.

  parent reply	other threads:[~2007-09-26 21:21 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-26 21:22 [PATCH] [0/6] Bugfixes for pasemi_mac Olof Johansson
2007-09-26 21:22 ` [PATCH] [1/6] pasemi_mac: fix build break in pasemi_mac_probe() Olof Johansson
2007-09-26 21:22   ` David Miller
2007-09-26 21:23 ` [PATCH] [2/6] pasemi_mac: fix build break in pasemi_mac_clean_rx() Olof Johansson
2007-09-26 21:24   ` David Miller
2007-09-26 21:23 ` [PATCH] [3/6] pasemi_mac: set interface speed correctly on XAUI ports Olof Johansson
2007-09-29  4:45   ` Jeff Garzik
2007-09-26 21:23 ` [PATCH] [5/6] pasemi_mac: flags as passed to spin_*_irqsave() should be unsigned long Olof Johansson
2007-09-26 21:24 ` Olof Johansson [this message]
2007-09-26 21:25 ` [PATCH] [6/6] pasemi_mac: pass in count of buffers to replenish rx ring with Olof Johansson
2007-09-26 21:26 ` [PATCH] [0/6] Bugfixes for pasemi_mac David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070926212442.GF24168@lixom.net \
    --to=olof@lixom.net \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.