All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Krzysztof Oledzki <olel@ans.pl>, Greg KH <greg@kroah.com>
Cc: stable@kernel.org, netdev@vger.kernel.org
Subject: [PATCH 1/3] sky2: reduce impact of watchdog timer
Date: Fri, 28 Sep 2007 09:48:12 -0700	[thread overview]
Message-ID: <20070928164858.474820246@linux-foundation.org> (raw)
In-Reply-To: 20070928164811.387831540@linux-foundation.org

[-- Attachment #1: sky2-hw-watchdog.patch --]
[-- Type: text/plain, Size: 4147 bytes --]

This is the 2.6.22 version of a regression fix that is already
in 2.6.23.  Change the watchdog timer form 10 per second all the time,
to 1 per second and only if interface is up.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>


--- a/drivers/net/sky2.c	2007-09-17 10:39:47.000000000 -0700
+++ b/drivers/net/sky2.c	2007-09-28 09:13:38.000000000 -0700
@@ -96,10 +96,6 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
-static int idle_timeout = 100;
-module_param(idle_timeout, int, 0);
-MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
-
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
@@ -1693,6 +1689,8 @@ static void sky2_link_up(struct sky2_por
 
 	netif_carrier_on(sky2->netdev);
 
+	mod_timer(&hw->watchdog_timer, jiffies + 1);
+
 	/* Turn on link LED */
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
@@ -2384,25 +2382,25 @@ static void sky2_le_error(struct sky2_hw
 	sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
 }
 
-/* If idle then force a fake soft NAPI poll once a second
- * to work around cases where sharing an edge triggered interrupt.
- */
-static inline void sky2_idle_start(struct sky2_hw *hw)
-{
-	if (idle_timeout > 0)
-		mod_timer(&hw->idle_timer,
-			  jiffies + msecs_to_jiffies(idle_timeout));
-}
-
-static void sky2_idle(unsigned long arg)
+/* Force a fake soft NAPI poll to handle lost IRQ's */
+static void sky2_watchdog(unsigned long arg)
 {
 	struct sky2_hw *hw = (struct sky2_hw *) arg;
 	struct net_device *dev = hw->dev[0];
+	int i, active = 0;
 
 	if (__netif_rx_schedule_prep(dev))
 		__netif_rx_schedule(dev);
 
-	mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
+	for (i = 0; i < hw->ports; i++) {
+		dev = hw->dev[i];
+		if (!netif_running(dev))
+			continue;
+		++active;
+	}
+
+	if (active)
+		mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
 }
 
 /* Hardware/software error handling */
@@ -2692,8 +2690,6 @@ static void sky2_restart(struct work_str
 
 	dev_dbg(&hw->pdev->dev, "restarting\n");
 
-	del_timer_sync(&hw->idle_timer);
-
 	rtnl_lock();
 	sky2_write32(hw, B0_IMSK, 0);
 	sky2_read32(hw, B0_IMSK);
@@ -2722,8 +2718,6 @@ static void sky2_restart(struct work_str
 		}
 	}
 
-	sky2_idle_start(hw);
-
 	rtnl_unlock();
 }
 
@@ -3713,11 +3707,9 @@ static int __devinit sky2_probe(struct p
 			sky2_show_addr(dev1);
 	}
 
-	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+	setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
 	INIT_WORK(&hw->restart_work, sky2_restart);
 
-	sky2_idle_start(hw);
-
 	pci_set_drvdata(pdev, hw);
 
 	return 0;
@@ -3752,7 +3744,7 @@ static void __devexit sky2_remove(struct
 	if (!hw)
 		return;
 
-	del_timer_sync(&hw->idle_timer);
+	del_timer_sync(&hw->watchdog_timer);
 
 	flush_scheduled_work();
 
@@ -3796,7 +3788,7 @@ static int sky2_suspend(struct pci_dev *
 	if (!hw)
 		return 0;
 
-	del_timer_sync(&hw->idle_timer);
+	del_timer_sync(&hw->watchdog_timer);
 	netif_poll_disable(hw->dev[0]);
 
 	for (i = 0; i < hw->ports; i++) {
@@ -3862,7 +3854,7 @@ static int sky2_resume(struct pci_dev *p
 	}
 
 	netif_poll_enable(hw->dev[0]);
-	sky2_idle_start(hw);
+
 	return 0;
 out:
 	dev_err(&pdev->dev, "resume failed (%d)\n", err);
@@ -3879,7 +3871,6 @@ static void sky2_shutdown(struct pci_dev
 	if (!hw)
 		return;
 
-	del_timer_sync(&hw->idle_timer);
 	netif_poll_disable(hw->dev[0]);
 
 	for (i = 0; i < hw->ports; i++) {
--- a/drivers/net/sky2.h	2007-08-21 10:59:11.000000000 -0700
+++ b/drivers/net/sky2.h	2007-09-28 09:13:15.000000000 -0700
@@ -1921,7 +1921,7 @@ struct sky2_hw {
 	u32		     st_idx;
 	dma_addr_t   	     st_dma;
 
-	struct timer_list    idle_timer;
+	struct timer_list    watchdog_timer;
 	struct work_struct   restart_work;
 	int		     msi;
 	wait_queue_head_t    msi_wait;

-- 
Stephen Hemminger <shemminger@linux-foundation.org>


  reply	other threads:[~2007-09-28 16:52 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-28 16:48 [PATCH 0/3] sky2: patches for 2.6.22.y Stephen Hemminger
2007-09-28 16:48 ` Stephen Hemminger [this message]
2007-09-28 16:48 ` [PATCH 2/3] sky2: fix VLAN receive processing Stephen Hemminger
2007-09-28 18:40   ` Krzysztof Oledzki
2007-09-28 19:20   ` [stable] " Chris Wright
2007-09-28 19:36     ` Stephen Hemminger
2007-09-28 19:41       ` Chris Wright
2007-09-28 16:48 ` [PATCH 3/3] sky2: fix transmit state on resume Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070928164858.474820246@linux-foundation.org \
    --to=shemminger@linux-foundation.org \
    --cc=greg@kroah.com \
    --cc=netdev@vger.kernel.org \
    --cc=olel@ans.pl \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.