From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Timur Tabi <timur@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v3] qe: miscellaneous code improvements and fixes to the QE library
Date: Wed, 3 Oct 2007 17:30:32 +0400 [thread overview]
Message-ID: <20071003133032.GA2417@localhost.localdomain> (raw)
In-Reply-To: <11903212461510-git-send-email-timur@freescale.com>
Hi Timur,
On Thu, Sep 20, 2007 at 03:47:26PM -0500, Timur Tabi wrote:
> This patch makes numerous miscellaneous code improvements to the QE library.
...and also breaks MPC8568E-MDS. ;-) Board hangs just after ip-config stuff.
Commit 589ffa1c520355e37d5868 in galak/powerpc.git.
Unfortunately it isn't split, thus it will take time to track faulty bit.
But so far... maybe you have any ideas?
...
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:fd
eth0: Running with NAPI enabled
eth0: 256/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd
eth1: Running with NAPI enabled
eth1: 256/256 RX/TX BD ring size
UCC Ethernet Controller MII Bus: probed
ucc_geth: QE UCC Gigabit Ethernet Controller
ucc_geth: UCC1 at 0xe0082000 (irq = 32)
ucc_geth: UCC2 at 0xe0083000 (irq = 33)
PCI: Enabling device 0001:02:00.0 (0000 -> 0003)
sky2 0001:02:00.0: v1.18 addr 0xa0000000 irq 18 Yukon-EC (0xb6) rev 1
sky2 eth4: addr 00:00:5a:71:75:fe
Marvell 88E1101: Registered new driver
Marvell 88E1112: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
netconsole: not configured, aborting
i2c /dev entries driver
rtc-ds1374 0-0068: rtc core: registered rtc-ds1374 as rtc0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-ds1374 0-0068: setting the system clock to 2007-01-02 22:23:42 (1167776622)
sky2 eth4: enabling interface
Sending DHCP requests .<6>PHY: e0024520:02 - Link is Up - 100/Full
PHY: e0024520:03 - Link is Up - 100/Full
PHY: e0024520:01 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 10.0.0.2, my address is 10.0.0.99
Thanks,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2007-10-03 13:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-20 20:47 [PATCH v3] qe: miscellaneous code improvements and fixes to the QE library Timur Tabi
2007-09-20 21:30 ` Timur Tabi
2007-09-20 21:44 ` Kumar Gala
2007-10-03 13:30 ` Anton Vorontsov [this message]
2007-10-03 14:16 ` Timur Tabi
2007-10-03 14:34 ` Anton Vorontsov
2007-10-03 14:39 ` Timur Tabi
2007-10-03 14:43 ` Kumar Gala
2007-10-03 15:01 ` Timur Tabi
2007-10-03 16:29 ` Anton Vorontsov
2007-10-03 16:33 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071003133032.GA2417@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.