[PATCH 02/16] rt2x00: Remove radio check from rt2x00lib_toggle_rx

[Ivo van Doorn <ivdoorn@gmail.com>]

Don't check if the radio is enabled in rt2x00lib_toggle_rx,
this is required since the link tuner should be disabled
when shutting down the device. The remaining calls inside the
rt2x00lib_toggle_rx handler should deliver no problems when
called while the radio is done.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 0216096..b6a5c34 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -164,9 +164,6 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
 {
 	enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-		return;
-
 	/*
 	 * When we are disabling the RX, we should also stop the link tuner.
 	 */
-- 
1.5.3.4