From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Sun, 07 Oct 2007 09:31:11 +0000 Subject: [lm-sensors] lm-sensors 3.0.0-rc2 to be released soon Message-Id: <20071007113111.2e0a275f@hyperion.delvare> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi all, I plan to release lm-sensors 3.0.0-rc2 tomorrow or the day after. The changes from rc1 are as follows (from CHANGES): Makefile: Add sensors-conf-convert to make install libsensors: Notify the caller when writing a value fails Differentiate between different read error types Report I/O errors as such sensord: Log the error code on failure Drop the configuration file search path mechanism (#2259) Manual page update sensors: Fix spurious critical temperature alarm Print error messages to stderr Make error messages more helpful and consistent Better handling of the fault flags sensors-conf-convert: Add a short help text sensors-detect: Fix SMSC SCH311x detection I am not yet sure if this will be the last release candidate before the final release. On the one hand, it seems to work really well, but on the other hand I really would like at least one additional application to be ported to the new libsensors API to confirm that it is OK. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors