From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 9/12] ide-disk: use struct ide_taskfile in __ide_do_rw_disk()
Date: Mon, 8 Oct 2007 23:15:49 +0200 [thread overview]
Message-ID: <200710082315.49176.bzolnier@gmail.com> (raw)
Based on the earlier work by Tejun Heo.
There should be no functionality changes caused by this patch.
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-disk.c | 87 ++++++++++++++++++++++++-------------------------
1 file changed, 43 insertions(+), 44 deletions(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -166,6 +166,7 @@ static ide_startstop_t __ide_do_rw_disk(
u8 lba48 = (drive->addressing == 1) ? 1 : 0;
u8 command = WIN_NOP;
ata_nsector_t nsectors;
+ struct ide_taskfile ltf, *tf = <f;
nsectors.all = (u16) rq->nr_sectors;
@@ -186,53 +187,36 @@ static ide_startstop_t __ide_do_rw_disk(
/* FIXME: SELECT_MASK(drive, 0) ? */
+ memset(tf, 0, sizeof(*tf));
+
if (drive->select.b.lba) {
if (lba48) {
- u8 tasklets[10];
-
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
- tasklets[0] = 0;
- tasklets[1] = 0;
- tasklets[2] = nsectors.b.low;
- tasklets[3] = nsectors.b.high;
- tasklets[4] = (u8) block;
- tasklets[5] = (u8)(block >> 8);
- tasklets[6] = (u8)(block >> 16);
- tasklets[7] = (u8)(block >> 24);
- if (sizeof(block) == 4) {
- tasklets[8] = 0;
- tasklets[9] = 0;
- } else {
- tasklets[8] = (u8)((u64)block >> 32);
- tasklets[9] = (u8)((u64)block >> 40);
+ tf->hob_nsect = nsectors.b.high;
+ tf->hob_lbal = (u8)(block >> 24);
+ if (sizeof(block) != 4) {
+ tf->hob_lbam = (u8)((u64)block >> 32);
+ tf->hob_lbah = (u8)((u64)block >> 40);
}
+
+ tf->nsect = nsectors.b.low;
+ tf->lbal = (u8) block;
+ tf->lbam = (u8)(block >> 8);
+ tf->lbah = (u8)(block >> 16);
#ifdef DEBUG
printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n",
- drive->name, tasklets[3], tasklets[2],
- tasklets[9], tasklets[8], tasklets[7],
- tasklets[6], tasklets[5], tasklets[4]);
+ drive->name, tf->hob_nsect, tf->nsect,
+ tf->hob_lbah, tf->hob_lbam, tf->hob_lbal,
+ tf->lbah, tf->lbam, tf->lbal);
#endif
- hwif->OUTB(tasklets[1], IDE_FEATURE_REG);
- hwif->OUTB(tasklets[3], IDE_NSECTOR_REG);
- hwif->OUTB(tasklets[7], IDE_SECTOR_REG);
- hwif->OUTB(tasklets[8], IDE_LCYL_REG);
- hwif->OUTB(tasklets[9], IDE_HCYL_REG);
-
- hwif->OUTB(tasklets[0], IDE_FEATURE_REG);
- hwif->OUTB(tasklets[2], IDE_NSECTOR_REG);
- hwif->OUTB(tasklets[4], IDE_SECTOR_REG);
- hwif->OUTB(tasklets[5], IDE_LCYL_REG);
- hwif->OUTB(tasklets[6], IDE_HCYL_REG);
- hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG);
} else {
- hwif->OUTB(0x00, IDE_FEATURE_REG);
- hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
- hwif->OUTB(block, IDE_SECTOR_REG);
- hwif->OUTB(block>>=8, IDE_LCYL_REG);
- hwif->OUTB(block>>=8, IDE_HCYL_REG);
- hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG);
+ tf->nsect = nsectors.b.low;
+ tf->lbal = block;
+ tf->lbam = block >>= 8;
+ tf->lbah = block >>= 8;
+ tf->device = (block >> 8) & 0xf;
}
} else {
unsigned int sect,head,cyl,track;
@@ -243,13 +227,28 @@ static ide_startstop_t __ide_do_rw_disk(
pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
- hwif->OUTB(0x00, IDE_FEATURE_REG);
- hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
- hwif->OUTB(sect, IDE_SECTOR_REG);
- hwif->OUTB(cyl, IDE_LCYL_REG);
- hwif->OUTB(cyl>>8, IDE_HCYL_REG);
- hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
- }
+ tf->nsect = nsectors.b.low;
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device = head;
+ }
+
+ if (drive->select.b.lba && lba48) {
+ hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG);
+ }
+
+ hwif->OUTB(tf->feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->lbah, IDE_HCYL_REG);
+
+ hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG);
if (dma) {
if (!hwif->dma_setup(drive)) {
next reply other threads:[~2007-10-08 21:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-08 21:15 Bartlomiej Zolnierkiewicz [this message]
2007-10-18 12:15 ` [PATCH 9/12] ide-disk: use struct ide_taskfile in __ide_do_rw_disk() Sergei Shtylyov
2007-10-18 12:16 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710082315.49176.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.