From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Wed, 10 Oct 2007 21:02:11 +0000 Subject: Re: [lm-sensors] lm-sensors 3.0.0-rc2 to be released soon Message-Id: <20071010230211.567869c7@hyperion.delvare> List-Id: References: <20071007113111.2e0a275f@hyperion.delvare> In-Reply-To: <20071007113111.2e0a275f@hyperion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Sun, 7 Oct 2007 11:31:11 +0200, Jean Delvare wrote: > I plan to release lm-sensors 3.0.0-rc2 tomorrow or the day after. The > changes from rc1 are as follows (from CHANGES): > > Makefile: Add sensors-conf-convert to make install > libsensors: Notify the caller when writing a value fails > Differentiate between different read error types > Report I/O errors as such > sensord: Log the error code on failure > Drop the configuration file search path mechanism (#2259) > Manual page update > sensors: Fix spurious critical temperature alarm > Print error messages to stderr > Make error messages more helpful and consistent > Better handling of the fault flags > sensors-conf-convert: Add a short help text > sensors-detect: Fix SMSC SCH311x detection > > > I am not yet sure if this will be the last release candidate before the > final release. On the one hand, it seems to work really well, but on > the other hand I really would like at least one additional application > to be ported to the new libsensors API to confirm that it is OK. 3.0.0-rc2 is now released. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors