From: Matteo Croce <technoboy85@gmail.com>
To: linux-mips@linux-mips.org
Cc: Eugene Konev <ejka@imfi.kspu.ru>,
netdev@vger.kernel.org, davem@davemloft.net,
kuznet@ms2.inr.ac.ru, pekkas@netcore.fi, jmorris@namei.org,
yoshfuji@linux-ipv6.org, kaber@coreworks.de,
Andrew Morton <akpm@linux-foundation.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: [PATCH][MIPS][6/6] AR7: leds driver
Date: Thu, 11 Oct 2007 03:01:30 +0200 [thread overview]
Message-ID: <200710110301.31223.technoboy85@gmail.com> (raw)
In-Reply-To: <200710110248.33028.technoboy85@gmail.com>
The new led driver, uses leds-gpio now
Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
diff --git a/drivers/leds/leds-ar7.c b/drivers/leds/leds-ar7.c
new file mode 100644
index 0000000..72b958a
--- /dev/null
+++ b/drivers/leds/leds-ar7.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <gpio.h>
+
+#define DRVNAME "ar7-leds"
+#define LONGNAME "TI AR7 LEDs driver"
+#define AR7_GPIO_BIT_STATUS_LED 8
+
+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
+MODULE_DESCRIPTION(LONGNAME);
+MODULE_LICENSE("GPL");
+
+static void ar7_status_led_set(struct led_classdev *pled,
+ enum led_brightness value)
+{
+ gpio_set_value(AR7_GPIO_BIT_STATUS_LED, value ? 0 : 1);
+}
+
+static struct led_classdev ar7_status_led = {
+ .name = "ar7:status",
+ .brightness_set = ar7_status_led_set,
+};
+
+#ifdef CONFIG_PM
+static int ar7_leds_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ led_classdev_suspend(&ar7_status_led);
+ return 0;
+}
+
+static int ar7_leds_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&ar7_status_led);
+ return 0;
+}
+#else /* CONFIG_PM */
+#define ar7_leds_suspend NULL
+#define ar7_leds_resume NULL
+#endif /* CONFIG_PM */
+
+static int ar7_leds_probe(struct platform_device *pdev)
+{
+ int rc;
+
+ rc = led_classdev_register(&pdev->dev, &ar7_status_led);
+ if (rc < 0)
+ goto out;
+
+ ar7_gpio_enable(AR7_GPIO_BIT_STATUS_LED);
+ gpio_direction_output(AR7_GPIO_BIT_STATUS_LED, 0);
+
+out:
+ return rc;
+}
+
+static int ar7_leds_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&ar7_status_led);
+
+ return 0;
+}
+
+static struct platform_device *ar7_leds_device;
+
+static struct platform_driver ar7_leds_driver = {
+ .probe = ar7_leds_probe,
+ .remove = ar7_leds_remove,
+ .suspend = ar7_leds_suspend,
+ .resume = ar7_leds_resume,
+ .driver = {
+ .name = DRVNAME,
+ },
+};
+
+static int __init ar7_leds_init(void)
+{
+ int rc;
+
+ ar7_leds_device = platform_device_alloc(DRVNAME, -1);
+ if (!ar7_leds_device)
+ return -ENOMEM;
+
+ rc = platform_device_add(ar7_leds_device);
+ if (rc < 0)
+ goto out_put;
+
+ rc = platform_driver_register(&ar7_leds_driver);
+ if (rc < 0)
+ goto out_put;
+
+ goto out;
+
+out_put:
+ platform_device_put(ar7_leds_device);
+out:
+ return rc;
+}
+
+static void __exit ar7_leds_exit(void)
+{
+ platform_driver_unregister(&ar7_leds_driver);
+ platform_device_unregister(ar7_leds_device);
+}
+
+module_init(ar7_leds_init);
+module_exit(ar7_leds_exit);
next prev parent reply other threads:[~2007-10-11 1:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-11 0:48 [PATCH][MIPS][0/6] AR7: AR7 strikes back Matteo Croce
2007-10-11 0:50 ` [PATCH][MIPS][1/6] AR7: core support Matteo Croce
2007-10-11 0:54 ` [PATCH][MIPS][2/6] AR7: VLYNQ bus Matteo Croce
2007-10-11 0:55 ` [PATCH][MIPS][3/6] AR7: mtd partition map Matteo Croce
2007-10-11 0:55 ` Matteo Croce
2007-10-11 0:57 ` [PATCH][MIPS][4/6] AR7: gpio char device Matteo Croce
2007-10-11 0:59 ` [PATCH][MIPS][5/6] AR7: serial hack Matteo Croce
2007-10-11 1:01 ` Matteo Croce [this message]
2007-10-18 8:22 ` [PATCH][MIPS][0/6] AR7: AR7 strikes back Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710110301.31223.technoboy85@gmail.com \
--to=technoboy85@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=ejka@imfi.kspu.ru \
--cc=jgarzik@pobox.com \
--cc=jmorris@namei.org \
--cc=kaber@coreworks.de \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
--cc=pekkas@netcore.fi \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.