From: Radek (Fotopiper) <fotopiper@o2.pl>
To: bluez-devel@lists.sf.net
Subject: [Bluez-devel] RFCOMM - serial line looped back.
Date: Thu, 11 Oct 2007 14:34:18 +0200 [thread overview]
Message-ID: <20071011143418.65350112@darkstar.example.net> (raw)
Hello,
I'm getting a "Serial line is looped back." from pppd when I try to connect to
the net threw my GSM phone.
pppd 2.4.4
kernel 2.6.22.8 (22.2 & 22.9 give the same results)
Bluez 3.20 (libs&utils)
Slacware 12
PPPD debug fallows "serial line looped back" and (at the end of mail) "LCP
terminated by peer (peer refused to authenticate)".
Any suggestions what I am doing wrong?
Best regards to all!
#>pppd debug gives (chat echo on):
abort on (NOCARRIER)
abort on (BUSY)
abort on (ERROR)
send (ATZ^M)
expect (OK)
ATZ
ATZ^M^M
OKOK
-- got it
send (AT+CGDCONT=1,"IP","wpmobi.internet"^M)
expect (OK)
^M
AT+CGDCONT=1,"IP","wpmobi.internet"
AT+CGDCONT=1,"IP","wpmobi.internet"^M^M
OKOK
-- got it
send (ATDT*99***1#^M)
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x120103d1> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x120103d1> <pcomp> <accomp>]
sent [LCP ConfNak id=0x1 <magic 0x9e7e8225>]
rcvd [LCP ConfNak id=0x1 <magic 0x9e7e8225>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x2c46fff2> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x2c46fff2> <pcomp> <accomp>]
sent [LCP ConfNak id=0x2 <magic 0xb829d231>]
rcvd [LCP ConfNak id=0x2 <magic 0xb829d231>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x7c164935> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x7c164935> <pcomp> <accomp>]
sent [LCP ConfNak id=0x3 <magic 0xcf0565e3>]
rcvd [LCP ConfNak id=0x3 <magic 0xcf0565e3>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x38b7e52d> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x38b7e52d> <pcomp> <accomp>]
sent [LCP ConfNak id=0x4 <magic 0xb25fcf05>]
rcvd [LCP ConfNak id=0x4 <magic 0xb25fcf05>]
sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0xdc05b7b8> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0xdc05b7b8> <pcomp> <accomp>]
sent [LCP ConfNak id=0x5 <magic 0x3b40f4a0>]
rcvd [LCP ConfNak id=0x5 <magic 0x3b40f4a0>]
sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x42656947> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x42656947> <pcomp> <accomp>]
sent [LCP ConfNak id=0x6 <magic 0xa25c92a7>]
rcvd [LCP ConfNak id=0x6 <magic 0xa25c92a7>]
sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x12cb6808> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x12cb6808> <pcomp> <accomp>]
sent [LCP ConfNak id=0x7 <magic 0xa67184e4>]
rcvd [LCP ConfNak id=0x7 <magic 0xa67184e4>]
sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0xee7e0c9c> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0xee7e0c9c> <pcomp> <accomp>]
sent [LCP ConfNak id=0x8 <magic 0xe7187c97>]
rcvd [LCP ConfNak id=0x8 <magic 0xe7187c97>]
sent [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x5a6aff52> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x5a6aff52> <pcomp> <accomp>]
sent [LCP ConfNak id=0x9 <magic 0x650dfa1>]
rcvd [LCP ConfNak id=0x9 <magic 0x650dfa1>]
sent [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xbd5dc8fa> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xbd5dc8fa> <pcomp> <accomp>]
sent [LCP ConfNak id=0xa <magic 0xd18be134>]
rcvd [LCP ConfNak id=0xa <magic 0xd18be134>]
Serial line is looped back.
sent [LCP TermReq id=0xb "Loopback detected"]
rcvd [LCP TermReq id=0xb "Loopback detected"]
sent [LCP TermAck id=0xb]
rcvd [LCP TermAck id=0xb]
Connection terminated.
#> peers-file:
lock
passive
noipdefault
asyncmap 0
modem
usepeerdns
defaultroute
noauth
/dev/rfcomm0
connect "/usr/sbin/chat -e -s -v -f /etc/ppp/chat/chat-PL.wpMobi.pl"
#> chat script:
ABORT NOCARRIER
ABORT BUSY
ABORT ERROR
'' ATZ
OK 'AT+CGDCONT=1,"IP","wpmobi.internet"'
OK ATDT*99***1#
#> sometimes pppd gives different resoults:
abort on (NOCARRIER)
abort on (BUSY)
abort on (ERROR)
send (ATZ^M)
expect (OK)
ATZ
ATZ^M^M
OKOK
-- got it
send (AT+CGDCONT=1,"IP","wpmobi.internet"^M)
expect (OK)
^M
AT+CGDCONT=1,"IP","wpmobi.internet"
AT+CGDCONT=1,"IP","wpmobi.internet"^M^M
OKOK
-- got it
send (ATDT*99***1#^M)
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2a92f843> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth pap>]
No auth is possible
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x1 <magic 0x2a92f843> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0xa0000>]
sent [LCP ConfAck id=0x2 <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <
ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x3 "peer refused to authenticate"]
LCP terminated by peer (peer refused to authenticate)
sent [LCP TermAck id=0x3]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Connection terminated.
Modem hangup
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2007-10-11 12:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-11 12:34 Radek [this message]
2007-10-11 23:08 ` [Bluez-devel] RFCOMM - serial line looped back Radek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071011143418.65350112@darkstar.example.net \
--to=fotopiper@o2.pl \
--cc=bluez-devel@lists.sf.net \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.