All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Brownell <david-b@pacbell.net>
To: linux-omap-open-source@linux.omap.com
Cc: Alan Stern <stern@rowland.harvard.edu>
Subject: [patch 2.6.23-omap] misc musb tweaks
Date: Fri, 12 Oct 2007 14:26:00 -0700	[thread overview]
Message-ID: <200710121426.00525.david-b@pacbell.net> (raw)

From: Alan Stern <stern@rowland.harvard.edu>

The patch below fixes a few minor infelicities.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 drivers/usb/musb/musb_host.c    |    6 +++---
 drivers/usb/musb/musb_host.h    |    9 ++++-----
 drivers/usb/musb/musb_virthub.c |   14 +++++++++-----
 3 files changed, 16 insertions(+), 13 deletions(-)

--- o26.orig/drivers/usb/musb/musb_host.c	2007-08-27 17:24:01.000000000 -0700
+++ o26/drivers/usb/musb/musb_host.c	2007-08-28 14:54:08.000000000 -0700
@@ -1513,9 +1513,9 @@ void musb_host_rx(struct musb *musb, u8 
 
 #ifdef CONFIG_USB_INVENTRA_DMA
 		/* done if urb buffer is full or short packet is recd */
-		done = ((urb->actual_length + xfer_len) >=
-				urb->transfer_buffer_length)
-			|| (dma->actual_len & (qh->maxpacket - 1));
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
 
 		/* send IN token for next packet, without AUTOREQ */
 		if (!done) {
--- o26.orig/drivers/usb/musb/musb_virthub.c	2007-08-27 17:24:01.000000000 -0700
+++ o26/drivers/usb/musb/musb_virthub.c	2007-08-28 14:54:08.000000000 -0700
@@ -202,6 +202,7 @@ void musb_root_disconnect(struct musb *m
 
 /*---------------------------------------------------------------------*/
 
+/* Caller may or may not hold musb->lock */
 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
 	struct musb	*musb = hcd_to_musb(hcd);
@@ -228,14 +229,17 @@ int musb_hub_control(
 	int		retval = 0;
 	unsigned long	flags;
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
 		return -ESHUTDOWN;
+	}
 
 	/* hub features:  always zero, setting is a NOP
 	 * port features: reported, sometimes updated when host is active
 	 * no indicators
 	 */
-	spin_lock_irqsave(&musb->lock, flags);
 	switch (typeReq) {
 	case ClearHubFeature:
 	case SetHubFeature:
@@ -248,7 +252,7 @@ int musb_hub_control(
 		}
 		break;
 	case ClearPortFeature:
-		if (wIndex != 1)
+		if ((wIndex & 0xff) != 1)
 			goto error;
 
 		switch (wValue) {
@@ -302,12 +306,12 @@ int musb_hub_control(
 
 		/* finish RESET signaling? */
 		if ((musb->port1_status & USB_PORT_STAT_RESET)
-				&& time_after(jiffies, musb->rh_timer))
+				&& time_after_eq(jiffies, musb->rh_timer))
 			musb_port_reset(musb, false);
 
 		/* finish RESUME signaling? */
 		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
-				&& time_after(jiffies, musb->rh_timer)) {
+				&& time_after_eq(jiffies, musb->rh_timer)) {
 			u8		power;
 
 			power = musb_readb(musb->mregs, MUSB_POWER);
--- o26.orig/drivers/usb/musb/musb_host.h	2007-08-27 17:24:01.000000000 -0700
+++ o26/drivers/usb/musb/musb_host.h	2007-08-28 14:54:08.000000000 -0700
@@ -37,13 +37,12 @@
 
 static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
 {
-	return (struct usb_hcd *) (((void *)musb)
-			- offsetof(struct usb_hcd, hcd_priv));
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
 }
 
 static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
 {
-	return (void *) hcd->hcd_priv;
+	return (struct musb *) (hcd->hcd_priv);
 }
 
 /* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
@@ -77,7 +76,7 @@ static inline struct musb_qh *first_qh(s
 {
 	if (list_empty(q))
 		return NULL;
-	return container_of(q->next, struct musb_qh, ring);
+	return list_entry(q->next, struct musb_qh, ring);
 }
 
 
@@ -102,7 +101,7 @@ static inline struct urb *next_urb(struc
 	queue = &qh->hep->urb_list;
 	if (list_empty(queue))
 		return NULL;
-	return container_of(queue->next, struct urb, urb_list);
+	return list_entry(queue->next, struct urb, urb_list);
 #else
 	return NULL;
 #endif

             reply	other threads:[~2007-10-12 21:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-12 21:26 David Brownell [this message]
2007-10-14 17:16 ` [patch 2.6.23-omap] misc musb tweaks Tony Lindgren
2007-10-15  1:10   ` David Brownell
     [not found] <Pine.LNX.4.44L0.0710142127330.32416-100000@netrider.rowland.org>
2007-10-15  1:44 ` David Brownell
2007-10-15 14:46   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200710121426.00525.david-b@pacbell.net \
    --to=david-b@pacbell.net \
    --cc=linux-omap-open-source@linux.omap.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.