[ 0.000000] Linux version 2.6.23.1-libata-tj (root@will-linux) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 SMP Wed Oct 17 00:04:50 EDT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable) [ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1143MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4f20 [ 0.000000] Entering add_active_range(0, 0, 522224) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 522224 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 522224 [ 0.000000] On node 0 totalpages: 522224 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2287 pages used for memmap [ 0.000000] HighMem zone: 290561 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F8F30, 0014 (r0 GATEWA) [ 0.000000] ACPI: RSDT 7F7F3040, 003C (r1 GATEWA SYSTEM 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7F7F30C0, 0074 (r1 GATEWA SYSTEM 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7F7F3180, 4B98 (r1 GATEWA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7F7F0000, 0040 [ 0.000000] ACPI: SLIC 7F7F7E80, 0176 (r1 GATEWA SYSTEM 42302E31 AWRD 1) [ 0.000000] ACPI: MCFG 7F7F8040, 003C (r1 GATEWA SYSTEM 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7F7F7D80, 0084 (r1 GATEWA SYSTEM 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 7F7F80C0, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7F7F8550, 02F1 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:60800000) [ 0.000000] Built 1 zonelists in Zone order. Total pages: 518145 [ 0.000000] Kernel command line: root=UUID=f658c897-ca24-4124-b01c-c5083f2be783 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1799.926 MHz processor. [ 54.325212] Console: colour VGA+ 80x25 [ 54.325215] console [tty0] enabled [ 54.325431] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 54.325678] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 54.414654] Memory: 2022988k/2088896k available (2042k kernel code, 64604k reserved, 931k data, 356k init, 1171392k highmem) [ 54.414661] virtual kernel memory layout: [ 54.414661] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 54.414663] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 54.414663] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 54.414664] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 54.414665] .init : 0xc03ed000 - 0xc0446000 ( 356 kB) [ 54.414666] .data : 0xc02fe808 - 0xc03e7744 ( 931 kB) [ 54.414667] .text : 0xc0100000 - 0xc02fe808 (2042 kB) [ 54.414670] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 54.494678] Calibrating delay using timer specific routine.. 3602.73 BogoMIPS (lpj=7205475) [ 54.494718] Security Framework v1.0.0 initialized [ 54.494724] SELinux: Disabled at boot. [ 54.494741] Mount-cache hash table entries: 512 [ 54.494883] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 54.494890] monitor/mwait feature present. [ 54.494892] using mwait in idle threads. [ 54.494897] CPU: L1 I cache: 32K, L1 D cache: 32K [ 54.494899] CPU: L2 cache: 1024K [ 54.494901] CPU: Physical Processor ID: 0 [ 54.494903] CPU: Processor Core ID: 0 [ 54.494905] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 54.494914] Compat vDSO mapped to ffffe000. [ 54.494928] Checking 'hlt' instruction... OK. [ 54.511059] SMP alternatives: switching to UP code [ 54.512237] ACPI: Core revision 20070126 [ 54.523065] CPU0: Intel Genuine Intel(R) CPU 2160 @ 1.80GHz stepping 02 [ 54.523082] SMP alternatives: switching to SMP code [ 54.523574] Booting processor 1/1 eip 2000 [ 54.533674] Initializing CPU#1 [ 54.610488] Calibrating delay using timer specific routine.. 3599.90 BogoMIPS (lpj=7199803) [ 54.610494] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 54.610499] monitor/mwait feature present. [ 54.610502] CPU: L1 I cache: 32K, L1 D cache: 32K [ 54.610503] CPU: L2 cache: 1024K [ 54.610505] CPU: Physical Processor ID: 0 [ 54.610506] CPU: Processor Core ID: 1 [ 54.610508] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 54.610961] CPU1: Intel Genuine Intel(R) CPU 2160 @ 1.80GHz stepping 02 [ 54.610980] Total of 2 processors activated (7202.63 BogoMIPS). [ 54.611127] ENABLING IO-APIC IRQs [ 54.611300] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 54.758392] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 54.778376] Brought up 2 CPUs [ 54.778584] Booting paravirtualized kernel on bare hardware [ 54.778702] NET: Registered protocol family 16 [ 54.778884] EISA bus registered [ 54.778889] ACPI: bus type pci registered [ 54.778961] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. [ 54.778964] PCI: Using MMCONFIG [ 54.779408] Setting up standard PCI resources [ 54.789799] ACPI: EC: Look up EC in DSDT [ 54.794407] ACPI: Interpreter enabled [ 54.794409] ACPI: (supports S0 S5) [ 54.794416] ACPI: Using IOAPIC for interrupt routing [ 54.800415] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 54.800798] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 54.800802] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 54.801307] PCI: Transparent bridge - 0000:00:1e.0 [ 54.801341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 54.801488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 54.801567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 54.801653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 54.813217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 54.813325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 54.813433] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 *15) [ 54.813539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15) [ 54.813644] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 54.813749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 54.813855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 54.813961] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 54.814085] Linux Plug and Play Support v0.97 (c) Adam Belay [ 54.814113] pnp: PnP ACPI init [ 54.814119] ACPI: bus type pnp registered [ 54.817271] pnp: PnP ACPI: found 14 devices [ 54.817274] ACPI: ACPI bus type pnp unregistered [ 54.817279] PnPBIOS: Disabled by ACPI PNP [ 54.817469] PCI: Using ACPI for IRQ routing [ 54.817472] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 54.838265] NET: Registered protocol family 8 [ 54.838268] NET: Registered protocol family 20 [ 54.842257] Time: tsc clocksource has been installed. [ 54.854360] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved [ 54.854370] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 54.854379] pnp: 00:0d: iomem range 0xcc000-0xcffff has been reserved [ 54.854382] pnp: 00:0d: iomem range 0xd5000-0xd7fff has been reserved [ 54.854386] pnp: 00:0d: iomem range 0xf0000-0xfbfff could not be reserved [ 54.854390] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 54.884718] PCI: Bridge: 0000:00:1c.0 [ 54.884721] IO window: c000-cfff [ 54.884725] MEM window: fdb00000-fdbfffff [ 54.884728] PREFETCH window: fde00000-fdefffff [ 54.884734] PCI: Bridge: 0000:00:1c.1 [ 54.884736] IO window: e000-efff [ 54.884740] MEM window: fdd00000-fddfffff [ 54.884742] PREFETCH window: fdc00000-fdcfffff [ 54.884747] PCI: Bridge: 0000:00:1e.0 [ 54.884749] IO window: d000-dfff [ 54.884752] MEM window: fda00000-fdafffff [ 54.884755] PREFETCH window: fd900000-fd9fffff [ 54.884775] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 54.884780] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 54.884795] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 54.884799] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 54.884806] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 54.884833] NET: Registered protocol family 2 [ 54.930608] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 54.930718] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 54.931614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 54.931890] TCP: Hash tables configured (established 131072 bind 65536) [ 54.931893] TCP reno registered [ 54.942784] checking if image is initramfs... it is [ 58.519016] Freeing initrd memory: 43635k freed [ 58.519693] audit: initializing netlink socket (disabled) [ 58.519705] audit(1192795771.980:1): initialized [ 58.519813] highmem bounce pool size: 64 pages [ 58.519892] VFS: Disk quotas dquot_6.5.1 [ 58.519901] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 58.519950] io scheduler noop registered [ 58.519952] io scheduler anticipatory registered [ 58.519954] io scheduler deadline registered [ 58.519965] io scheduler cfq registered (default) [ 58.519975] Boot video device is 0000:00:02.0 [ 58.520154] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 58.520183] assign_interrupt_mode Found MSI capability [ 58.520210] Allocate Port Service[0000:00:1c.0:pcie00] [ 58.520241] Allocate Port Service[0000:00:1c.0:pcie02] [ 58.520270] Allocate Port Service[0000:00:1c.0:pcie03] [ 58.520333] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 58.520361] assign_interrupt_mode Found MSI capability [ 58.520384] Allocate Port Service[0000:00:1c.1:pcie00] [ 58.520413] Allocate Port Service[0000:00:1c.1:pcie02] [ 58.520447] Allocate Port Service[0000:00:1c.1:pcie03] [ 58.520609] isapnp: Scanning for PnP cards... [ 58.873285] isapnp: No Plug & Play device found [ 58.891771] Real Time Clock Driver v1.12ac [ 58.891867] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 58.891960] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.892115] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 58.892677] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 58.892875] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 58.893601] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 58.893686] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 58.893689] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 58.893897] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 58.893899] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 58.894386] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 58.894481] mice: PS/2 mouse device common for all mice [ 58.894599] EISA: Probing bus 0 at eisa.0 [ 58.894629] EISA: Detected 0 cards. [ 58.894701] TCP cubic registered [ 58.894709] NET: Registered protocol family 1 [ 58.894730] Starting balanced_irq [ 58.894748] Using IPI No-Shortcut mode [ 58.895006] Freeing unused kernel memory: 356k freed [ 58.918633] input: AT Translated Set 2 keyboard as /class/input/input0 [ 60.099018] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 60.123424] ACPI: Fan [FAN] (on) [ 60.127724] ACPI: SSDT 7F7F84C0, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 60.127852] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] [ 60.127861] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] [ 60.129285] ACPI: Thermal Zone [THRM] (40 C) [ 60.191118] md: raid0 personality registered for level 0 [ 60.657626] usbcore: registered new interface driver usbfs [ 60.657651] usbcore: registered new interface driver hub [ 60.660035] usbcore: registered new device driver usb [ 60.664425] USB Universal Host Controller Interface driver v3.0 [ 60.664958] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 60.664969] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 60.664972] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 60.665189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 60.665217] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000fe00 [ 60.665397] usb usb1: configuration #1 chosen from 1 choice [ 60.665486] hub 1-0:1.0: USB hub found [ 60.665493] hub 1-0:1.0: 2 ports detected [ 60.670320] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 60.678729] SCSI subsystem initialized [ 60.687205] libata version 3.00 loaded. [ 60.769357] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 60.769369] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 60.769373] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 60.769400] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 60.769427] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 [ 60.769520] usb usb2: configuration #1 chosen from 1 choice [ 60.769544] hub 2-0:1.0: USB hub found [ 60.769549] hub 2-0:1.0: 2 ports detected [ 60.873694] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 60.873705] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 60.873708] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 60.873732] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 60.873759] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fc00 [ 60.873855] usb usb3: configuration #1 chosen from 1 choice [ 60.873878] hub 3-0:1.0: USB hub found [ 60.873884] hub 3-0:1.0: 2 ports detected [ 60.978040] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 60.978049] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 60.978052] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 60.978075] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 60.978101] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 [ 60.978193] usb usb4: configuration #1 chosen from 1 choice [ 60.978216] hub 4-0:1.0: USB hub found [ 60.978221] hub 4-0:1.0: 2 ports detected [ 61.083310] sata_sil24 0000:02:00.0: version 1.1 [ 61.083334] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 61.083390] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 61.083501] scsi0 : sata_sil24 [ 61.083552] scsi1 : sata_sil24 [ 61.083579] ata1: SATA max UDMA/100 host m128@0xfddff000 port 0xfddf8000 irq 17 [ 61.083583] ata2: SATA max UDMA/100 host m128@0xfddff000 port 0xfddfa000 irq 17 [ 61.114298] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 61.283717] usb 2-2: configuration #1 chosen from 1 choice [ 61.523935] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 61.667596] usb 3-2: configuration #1 chosen from 1 choice [ 61.670522] hub 3-2:1.0: USB hub found [ 61.672479] hub 3-2:1.0: 7 ports detected [ 62.025975] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 62.190239] usb 4-2: configuration #1 chosen from 1 choice [ 62.200628] usbcore: registered new interface driver hiddev [ 62.214318] input: USB Optical Mouse as /class/input/input1 [ 62.214340] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2 [ 62.214359] usbcore: registered new interface driver usbhid [ 62.214362] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 62.214526] usbcore: registered new interface driver libusual [ 62.221703] Initializing USB Mass Storage driver... [ 62.222276] scsi2 : SCSI emulation for USB Mass Storage devices [ 62.222398] usb-storage: device found at 2 [ 62.222400] usb-storage: waiting for device to settle before scanning [ 62.222412] usbcore: registered new interface driver usb-storage [ 62.222415] USB Mass Storage support registered. [ 63.290792] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 63.291017] ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 63.291277] ata1.00: hard resetting link [ 63.612171] ata1.00: SATA link down (SStatus 0 SControl 10) [ 63.612201] ata1.01: hard resetting link [ 63.933281] ata1.01: SATA link down (SStatus 0 SControl 300) [ 63.933311] ata1.02: hard resetting link [ 64.254393] ata1.02: SATA link down (SStatus 0 SControl 300) [ 64.254423] ata1.03: hard resetting link [ 64.575502] ata1.03: SATA link down (SStatus 0 SControl 300) [ 64.575532] ata1.04: hard resetting link [ 64.896614] ata1.04: SATA link down (SStatus 0 SControl 300) [ 64.896620] ata1.05: hard resetting link [ 65.217724] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 65.217785] ata1: EH complete [ 67.237856] usb-storage: device scan complete [ 67.240852] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 67.243849] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 67.246844] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 67.249838] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 67.262882] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 67.267838] sd 2:0:0:1: [sdb] Attached SCSI removable disk [ 67.272833] sd 2:0:0:2: [sdc] Attached SCSI removable disk [ 67.277823] sd 2:0:0:3: [sdd] Attached SCSI removable disk [ 67.282148] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 67.282170] sd 2:0:0:1: Attached scsi generic sg1 type 0 [ 67.282191] sd 2:0:0:2: Attached scsi generic sg2 type 0 [ 67.282212] sd 2:0:0:3: Attached scsi generic sg3 type 0 [ 67.305013] ata2: SATA link down (SStatus 0 SControl 0) [ 67.306812] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 [ 67.306827] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 67.306831] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 67.306871] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 67.306900] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 67.306907] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfdfff000 [ 67.310800] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 67.310906] usb usb5: configuration #1 chosen from 1 choice [ 67.310936] hub 5-0:1.0: USB hub found [ 67.310942] hub 5-0:1.0: 8 ports detected [ 67.361248] usb 2-2: USB disconnect, address 2 [ 67.413607] 8139cp 0000:03:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 67.413611] 8139cp 0000:03:05.0: Try the "8139too" driver instead. [ 67.413738] sata_vsc 0000:03:02.0: version 2.3 [ 67.413785] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 67.413894] scsi3 : sata_vsc [ 67.413938] scsi4 : sata_vsc [ 67.413973] scsi5 : sata_vsc [ 67.414007] scsi6 : sata_vsc [ 67.414032] ata3: SATA max UDMA/133 mmio m4096@0xfdaff000 port 0xfdaff200 irq 221 [ 67.414035] ata4: SATA max UDMA/133 mmio m4096@0xfdaff000 port 0xfdaff400 irq 221 [ 67.414038] ata5: SATA max UDMA/133 mmio m4096@0xfdaff000 port 0xfdaff600 irq 221 [ 67.414041] ata6: SATA max UDMA/133 mmio m4096@0xfdaff000 port 0xfdaff800 irq 221 [ 67.416191] 8139too Fast Ethernet driver 0.9.28 [ 67.489594] usb 3-2: USB disconnect, address 2 [ 67.617917] usb 4-2: USB disconnect, address 2 [ 67.882933] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 67.899360] ata3.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 67.899365] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 67.915518] ata3.00: configured for UDMA/133 [ 68.171839] usb 5-6: new high speed USB device using ehci_hcd and address 3 [ 68.304685] usb 5-6: configuration #1 chosen from 1 choice [ 68.304855] hub 5-6:1.0: USB hub found [ 68.304954] hub 5-6:1.0: 7 ports detected [ 68.384571] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 68.403821] ata4.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 68.403825] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 68.417142] ata4.00: configured for UDMA/133 [ 68.649509] usb 5-8: new high speed USB device using ehci_hcd and address 4 [ 68.784263] usb 5-8: configuration #1 chosen from 1 choice [ 68.784514] scsi7 : SCSI emulation for USB Mass Storage devices [ 68.784683] usb-storage: device found at 4 [ 68.784684] usb-storage: waiting for device to settle before scanning [ 68.886365] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 68.903307] ata5.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 68.903311] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 68.919085] ata5.00: configured for UDMA/133 [ 69.022882] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 69.191697] usb 2-2: configuration #1 chosen from 1 choice [ 69.207816] input: USB Optical Mouse as /class/input/input2 [ 69.207839] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2 [ 69.388476] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 69.397769] ata6.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133 [ 69.397773] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 69.413995] ata6.00: configured for UDMA/133 [ 69.414128] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 69.414223] sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 69.414234] sd 3:0:0:0: [sda] Write Protect is off [ 69.414236] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 69.414251] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.414303] sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 69.414312] sd 3:0:0:0: [sda] Write Protect is off [ 69.414314] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 69.414329] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.414333] sda: unknown partition table [ 69.423643] sd 3:0:0:0: [sda] Attached SCSI disk [ 69.423699] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 69.423827] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 69.423883] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 69.423894] sd 4:0:0:0: [sdb] Write Protect is off [ 69.423896] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 69.423911] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.423953] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 69.423963] sd 4:0:0:0: [sdb] Write Protect is off [ 69.423965] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 69.423980] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.423982] sdb: [mac] sdb1 sdb2 sdb3 sdb4 [ 69.428611] sd 4:0:0:0: [sdb] Attached SCSI disk [ 69.428659] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 69.428813] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 69.428881] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 69.428891] sd 5:0:0:0: [sdc] Write Protect is off [ 69.428893] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 69.428908] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.428947] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 69.428958] sd 5:0:0:0: [sdc] Write Protect is off [ 69.428960] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 69.428975] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.428978] sdc: [mac] sdc1 sdc2 sdc3 sdc4 [ 69.437238] sd 5:0:0:0: [sdc] Attached SCSI disk [ 69.437290] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 69.437414] scsi 6:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5 [ 69.437488] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 69.437497] sd 6:0:0:0: [sdd] Write Protect is off [ 69.437499] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 69.437514] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.437551] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 69.437560] sd 6:0:0:0: [sdd] Write Protect is off [ 69.437562] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 69.437577] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 69.437579] sdd: unknown partition table [ 69.451004] sd 6:0:0:0: [sdd] Attached SCSI disk [ 69.451052] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 69.451338] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 [ 69.451371] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 69.451374] ata4294967295: failed to start port (errno=-19) [ 69.451382] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 69.451409] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 69.451425] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 69.451428] ata4294967295: failed to start port (errno=-19) [ 69.451434] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 69.453994] ata_piix 0000:00:1f.1: version 2.12 [ 69.454011] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 [ 69.454042] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 69.454092] scsi8 : ata_piix [ 69.454139] scsi9 : ata_piix [ 69.454235] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 69.454238] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 69.634351] md: md0 stopped. [ 69.773125] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-H40N, RG01, max UDMA/66 [ 69.792256] md: bind [ 69.792495] md: bind [ 69.792652] md: bind [ 69.792882] md: bind [ 69.800271] md0: setting max_sectors to 128, segment boundary to 32767 [ 69.800275] raid0: looking at sda [ 69.800277] raid0: comparing sda(488386496) with sda(488386496) [ 69.800279] raid0: END [ 69.800280] raid0: ==> UNIQUE [ 69.800281] raid0: 1 zones [ 69.800283] raid0: looking at sdd [ 69.800284] raid0: comparing sdd(488386496) with sda(488386496) [ 69.800286] raid0: EQUAL [ 69.800288] raid0: looking at sdc [ 69.800289] raid0: comparing sdc(488386496) with sda(488386496) [ 69.800291] raid0: EQUAL [ 69.800293] raid0: looking at sdb [ 69.800294] raid0: comparing sdb(488386496) with sda(488386496) [ 69.800296] raid0: EQUAL [ 69.800297] raid0: FINAL 1 zones [ 69.800301] raid0: done. [ 69.800302] raid0 : md_size is 1953545984 blocks. [ 69.800304] raid0 : conf->hash_spacing is 1953545984 blocks. [ 69.800305] raid0 : nb_zone is 1. [ 69.800307] raid0 : Allocating 4 bytes for hash. [ 69.945373] ata7.00: configured for UDMA/66 [ 69.945410] ata8: port disabled. ignoring. [ 69.948915] scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H40N RG01 PQ: 0 ANSI: 5 [ 69.949013] scsi 8:0:0:0: Attached scsi generic sg4 type 5 [ 69.949066] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 69.949099] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 69.949133] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 69.949250] scsi10 : ata_piix [ 69.949298] scsi11 : ata_piix [ 69.949417] ata9: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 69.949421] ata10: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 70.114360] ata9.00: ATA-7: Hitachi HDT725040VLA380, V5COA52A, max UDMA/133 [ 70.114365] ata9.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 70.130427] ata9.00: configured for UDMA/133 [ 70.335587] ata10.00: ATA-7: ST3750640AS, 3.AAK, max UDMA/133 [ 70.335592] ata10.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 70.402114] ata10.00: configured for UDMA/133 [ 70.402267] scsi 10:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5 [ 70.402364] sd 10:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB) [ 70.402376] sd 10:0:0:0: [sde] Write Protect is off [ 70.402378] sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 70.402394] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.402448] sd 10:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB) [ 70.402457] sd 10:0:0:0: [sde] Write Protect is off [ 70.402459] sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 70.402475] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.402479] sde: sde1 sde2 < sde5 > [ 70.430148] sd 10:0:0:0: [sde] Attached SCSI disk [ 70.430205] sd 10:0:0:0: Attached scsi generic sg5 type 0 [ 70.430308] scsi 11:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 [ 70.430364] sd 11:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB) [ 70.430374] sd 11:0:0:0: [sdf] Write Protect is off [ 70.430376] sd 11:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 70.430392] sd 11:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.430431] sd 11:0:0:0: [sdf] 1465149168 512-byte hardware sectors (750156 MB) [ 70.430442] sd 11:0:0:0: [sdf] Write Protect is off [ 70.430444] sd 11:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 70.430459] sd 11:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.430461] sdf: sdf1 [ 70.450086] sd 11:0:0:0: [sdf] Attached SCSI disk [ 70.450134] sd 11:0:0:0: Attached scsi generic sg6 type 0 [ 70.450387] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 70.450846] eth0: RealTek RTL8139 at 0xf8882000, 00:19:21:fe:57:62, IRQ 21 [ 70.450849] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 70.489310] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 70.489316] Uniform CD-ROM driver Revision: 3.20 [ 70.489394] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 70.647925] kjournald starting. Commit interval 5 seconds [ 70.647941] EXT3-fs: mounted filesystem with ordered data mode. [ 73.809300] usb-storage: device scan complete [ 73.809911] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 73.810540] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 73.811163] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 73.811787] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 73.812941] sd 7:0:0:0: [sdg] Attached SCSI removable disk [ 73.812997] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 73.813936] sd 7:0:0:1: [sdh] Attached SCSI removable disk [ 73.813982] sd 7:0:0:1: Attached scsi generic sg8 type 0 [ 73.814936] sd 7:0:0:2: [sdi] Attached SCSI removable disk [ 73.814981] sd 7:0:0:2: Attached scsi generic sg9 type 0 [ 73.815932] sd 7:0:0:3: [sdj] Attached SCSI removable disk [ 73.815978] sd 7:0:0:3: Attached scsi generic sg10 type 0 [ 77.049455] usb_id[3966]: segfault at 00000000 eip b7e82648 esp bfec70b0 error 4 [ 77.806953] input: PC Speaker as /class/input/input3 [ 77.947634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 77.998519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 78.065394] intel_rng: FWH not detected [ 78.126011] iTCO_vendor_support: vendor-support=0 [ 78.134360] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 78.134428] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 78.134457] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 78.160838] Linux agpgart interface v0.102 [ 78.265578] input: Power Button (FF) as /class/input/input4 [ 78.265617] ACPI: Power Button (FF) [PWRF] [ 78.265677] input: Power Button (CM) as /class/input/input5 [ 78.265705] ACPI: Power Button (CM) [PWRB] [ 78.314531] agpgart: Detected an Intel 945G Chipset. [ 78.315067] agpgart: Detected 7932K stolen memory. [ 78.429935] agpgart: AGP aperture is 256M @ 0xd0000000 [ 78.582365] parport_pc 00:08: reported by Plug and Play ACPI [ 78.582410] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 78.741130] usb_id[4833]: segfault at 00000000 eip b7da5648 esp bfdf3fd0 error 4 [ 78.756253] usb_id[4835]: segfault at 00000000 eip b7e85648 esp bfe6d050 error 4 [ 79.156954] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 79.156977] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 79.188477] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 79.510939] fuse init (API version 7.8) [ 79.529177] lp0: using parport0 (interrupt-driven). [ 79.593462] Adding 6056464k swap on /dev/sde5. Priority:-1 extents:1 across:6056464k [ 79.839283] EXT3 FS on sde1, internal journal [ 80.319345] JFS: nTxBlock = 8192, nTxLock = 65536 [ 83.248565] No dock devices found. [ 83.257485] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 85.125614] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 85.901898] [drm] Initialized drm 1.1.0 20060810 [ 85.917287] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 85.917350] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 86.598493] NET: Registered protocol family 10 [ 86.598566] lo: Disabled Privacy Extensions [ 87.683413] ppdev: user-space parallel port driver [ 92.321154] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 92.625203] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 92.642819] NFSD: starting 90-second grace period [ 95.023094] Capability LSM initialized [ 96.264445] Bluetooth: Core ver 2.11 [ 96.264512] NET: Registered protocol family 31 [ 96.264516] Bluetooth: HCI device and connection manager initialized [ 96.264521] Bluetooth: HCI socket layer initialized [ 96.410973] Bluetooth: L2CAP ver 2.8 [ 96.410980] Bluetooth: L2CAP socket layer initialized [ 96.624179] Bluetooth: RFCOMM socket layer initialized [ 96.624196] Bluetooth: RFCOMM TTY layer initialized [ 96.624198] Bluetooth: RFCOMM ver 1.8 [ 101.719485] NET: Registered protocol family 17 [ 115.323943] eth0: no IPv6 routers present