All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matteo Croce <technoboy85@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-mips@linux-mips.org, Eugene Konev <ejka@imfi.kspu.ru>,
	netdev@vger.kernel.org, davem@davemloft.net,
	kuznet@ms2.inr.ac.ru, pekkas@netcore.fi, jmorris@namei.org,
	yoshfuji@linux-ipv6.org, kaber@coreworks.de,
	Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH][MIPS] AR7 ethernet
Date: Tue, 23 Oct 2007 19:12:22 +0200	[thread overview]
Message-ID: <200710231912.23446.technoboy85@gmail.com> (raw)
In-Reply-To: <4713B055.802@pobox.com>

Il Monday 15 October 2007 20:24:21 Jeff Garzik ha scritto:
> applied

Small update to the driver, please apply

Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index ae41973..57541d2 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -460,18 +460,11 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct cpmac_desc *desc;
 	struct cpmac_priv *priv = netdev_priv(dev);
 
-	if (unlikely(skb_padto(skb, ETH_ZLEN))) {
-		if (netif_msg_tx_err(priv) && net_ratelimit())
-			printk(KERN_WARNING
-			       "%s: tx: padding failed, dropping\n", dev->name);
-		spin_lock(&priv->lock);
-		dev->stats.tx_dropped++;
-		spin_unlock(&priv->lock);
-		return -ENOMEM;
-	}
+	if (unlikely(skb_padto(skb, ETH_ZLEN)))
+		return NETDEV_TX_OK;
 
 	len = max(skb->len, ETH_ZLEN);
-	queue = skb_get_queue_mapping(skb);
+	queue = skb->queue_mapping;
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	netif_stop_subqueue(dev, queue);
 #else
@@ -481,13 +474,9 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	desc = &priv->desc_ring[queue];
 	if (unlikely(desc->dataflags & CPMAC_OWN)) {
 		if (netif_msg_tx_err(priv) && net_ratelimit())
-			printk(KERN_WARNING "%s: tx dma ring full, dropping\n",
+			printk(KERN_WARNING "%s: tx dma ring full\n",
 			       dev->name);
-		spin_lock(&priv->lock);
-		dev->stats.tx_dropped++;
-		spin_unlock(&priv->lock);
-		dev_kfree_skb_any(skb);
-		return -ENOMEM;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock(&priv->lock);
@@ -509,7 +498,7 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		cpmac_dump_skb(dev, skb);
 	cpmac_write(priv->regs, CPMAC_TX_PTR(queue), (u32)desc->mapping);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void cpmac_end_xmit(struct net_device *dev, int queue)
@@ -646,12 +635,14 @@ static void cpmac_clear_tx(struct net_device *dev)
 	int i;
 	if (unlikely(!priv->desc_ring))
 		return;
-	for (i = 0; i < CPMAC_QUEUES; i++)
+	for (i = 0; i < CPMAC_QUEUES; i++) {
+		priv->desc_ring[i].dataflags = 0;
 		if (priv->desc_ring[i].skb) {
 			dev_kfree_skb_any(priv->desc_ring[i].skb);
 			if (netif_subqueue_stopped(dev, i))
 			    netif_wake_subqueue(dev, i);
 		}
+	}
 }
 
 static void cpmac_hw_error(struct work_struct *work)
@@ -727,11 +718,13 @@ static void cpmac_tx_timeout(struct net_device *dev)
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	for (i = 0; i < CPMAC_QUEUES; i++)
 		if (priv->desc_ring[i].skb) {
+			priv->desc_ring[i].dataflags = 0;
 			dev_kfree_skb_any(priv->desc_ring[i].skb);
 			netif_wake_subqueue(dev, i);
 			break;
 		}
 #else
+	priv->desc_ring[0].dataflags = 0;
 	if (priv->desc_ring[0].skb)
 		dev_kfree_skb_any(priv->desc_ring[0].skb);
 	netif_wake_queue(dev);
@@ -794,7 +787,7 @@ static int cpmac_set_ringparam(struct net_device *dev, struct ethtool_ringparam*
 {
 	struct cpmac_priv *priv = netdev_priv(dev);
 
-	if (dev->flags && IFF_UP)
+	if (netif_running(dev))
 		return -EBUSY;
 	priv->ring_size = ring->rx_pending;
 	return 0;

  reply	other threads:[~2007-10-23 17:13 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-14 16:10 [PATCH][MIPS] AR7 ethernet Matteo Croce
2007-10-15 18:24 ` Jeff Garzik
2007-10-23 17:12   ` Matteo Croce [this message]
2007-10-24  0:23     ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200710231912.23446.technoboy85@gmail.com \
    --to=technoboy85@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=davem@davemloft.net \
    --cc=ejka@imfi.kspu.ru \
    --cc=jgarzik@pobox.com \
    --cc=jmorris@namei.org \
    --cc=kaber@coreworks.de \
    --cc=kuznet@ms2.inr.ac.ru \
    --cc=linux-mips@linux-mips.org \
    --cc=netdev@vger.kernel.org \
    --cc=pekkas@netcore.fi \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.