From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: rt2400-devel@lists.sourceforge.net, linux-wireless@vger.kernel.org
Subject: [PATCH 7/21] rt2x00: Cleanup if-statements
Date: Sat, 27 Oct 2007 13:38:13 +0200 [thread overview]
Message-ID: <200710271338.13543.IvDoorn@gmail.com> (raw)
In-Reply-To: <200710271334.34192.IvDoorn@gmail.com>
Cleanup if-statements for simple 1/0 register field values.
This also fixes a endian bug in rt2500usb when working
with the PHY_CSR2 initialization. As well as a bug
in the enabling of the LED in rt73usb.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 28 ++++++-----------
drivers/net/wireless/rt2x00/rt2500pci.c | 28 ++++++-----------
drivers/net/wireless/rt2x00/rt2500usb.c | 22 +++++--------
drivers/net/wireless/rt2x00/rt2500usb.h | 13 +++++++-
drivers/net/wireless/rt2x00/rt2x00.h | 12 ++++----
drivers/net/wireless/rt2x00/rt61pci.c | 50 +++++++++++++++----------------
drivers/net/wireless/rt2x00/rt73usb.c | 28 ++++++++---------
7 files changed, 83 insertions(+), 98 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 5b3adba..fc16212 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -524,18 +524,10 @@ static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
-
- if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
- rt2x00_set_field32(®, LEDCSR_LINK, 1);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0);
- } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
- rt2x00_set_field32(®, LEDCSR_LINK, 0);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1);
- } else {
- rt2x00_set_field32(®, LEDCSR_LINK, 1);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1);
- }
-
+ rt2x00_set_field32(®, LEDCSR_LINK,
+ (rt2x00dev->led_mode != LED_MODE_ASUS));
+ rt2x00_set_field32(®, LEDCSR_ACTIVITY,
+ (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
}
@@ -1110,12 +1102,12 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
}
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
- if (queue == IEEE80211_TX_QUEUE_DATA0)
- rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA1)
- rt2x00_set_field32(®, TXCSR0_KICK_TX, 1);
- else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
- rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1);
+ rt2x00_set_field32(®, TXCSR0_KICK_PRIO,
+ (queue == IEEE80211_TX_QUEUE_DATA0));
+ rt2x00_set_field32(®, TXCSR0_KICK_TX,
+ (queue == IEEE80211_TX_QUEUE_DATA1));
+ rt2x00_set_field32(®, TXCSR0_KICK_ATIM,
+ (queue == IEEE80211_TX_QUEUE_AFTER_BEACON));
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index b6d7462..c59ca0a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -563,18 +563,10 @@ static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
-
- if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
- rt2x00_set_field32(®, LEDCSR_LINK, 1);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0);
- } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
- rt2x00_set_field32(®, LEDCSR_LINK, 0);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1);
- } else {
- rt2x00_set_field32(®, LEDCSR_LINK, 1);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1);
- }
-
+ rt2x00_set_field32(®, LEDCSR_LINK,
+ (rt2x00dev->led_mode != LED_MODE_ASUS));
+ rt2x00_set_field32(®, LEDCSR_ACTIVITY,
+ (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
}
@@ -1244,12 +1236,12 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
}
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
- if (queue == IEEE80211_TX_QUEUE_DATA0)
- rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA1)
- rt2x00_set_field32(®, TXCSR0_KICK_TX, 1);
- else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
- rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1);
+ rt2x00_set_field32(®, TXCSR0_KICK_PRIO,
+ (queue == IEEE80211_TX_QUEUE_DATA0));
+ rt2x00_set_field32(®, TXCSR0_KICK_TX,
+ (queue == IEEE80211_TX_QUEUE_DATA1));
+ rt2x00_set_field32(®, TXCSR0_KICK_ATIM,
+ (queue == IEEE80211_TX_QUEUE_AFTER_BEACON));
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 02f1731..6c2e275 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -517,18 +517,10 @@ static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
-
- if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
- rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
- rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
- } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
- rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
- rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
- } else {
- rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
- rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
- }
-
+ rt2x00_set_field16(®, MAC_CSR20_LINK,
+ (rt2x00dev->led_mode != LED_MODE_ASUS));
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY,
+ (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
}
@@ -765,9 +757,11 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®);
- reg &= ~0x0002;
+ rt2x00_set_field16(®, PHY_CSR2_LNA, 0);
} else {
- reg = 0x3002;
+ reg = 0;
+ rt2x00_set_field16(®, PHY_CSR2_LNA, 1);
+ rt2x00_set_field16(®, PHY_CSR2_LNA_MODE, 3);
}
rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b18d56e..2741840 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -430,10 +430,21 @@
/*
* MAC configuration registers.
+ */
+
+/*
* PHY_CSR2: TX MAC configuration.
- * PHY_CSR3: RX MAC configuration.
+ * NOTE: Both register fields are complete dummy,
+ * documentation and legacy drivers are unclear un
+ * what this register means or what fields exists.
*/
#define PHY_CSR2 0x04c4
+#define PHY_CSR2_LNA FIELD16(0x0002)
+#define PHY_CSR2_LNA_MODE FIELD16(0x3000)
+
+/*
+ * PHY_CSR3: RX MAC configuration.
+ */
#define PHY_CSR3 0x04c6
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index c9df8f1..e3fbcb8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -133,20 +133,20 @@
*/
static inline int is_rts_frame(u16 fc)
{
- return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
+ return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
}
static inline int is_cts_frame(u16 fc)
{
- return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
+ return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
}
static inline int is_probe_resp(u16 fc)
{
- return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
+ return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
+ ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 86fa07a..0830000 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -428,7 +428,7 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !!(rt2x00dev->curr_hwmode != HWMODE_A));
+ (rt2x00dev->curr_hwmode != HWMODE_A));
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
@@ -646,17 +646,17 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00dev->curr_hwmode == HWMODE_A) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1);
} else {
sel = antenna_sel_bg;
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0);
}
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
+ (rt2x00dev->curr_hwmode == HWMODE_B ||
+ rt2x00dev->curr_hwmode == HWMODE_G));
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
+ (rt2x00dev->curr_hwmode == HWMODE_A));
+
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
@@ -727,7 +727,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
- u16 led_reg;
u8 arg0;
u8 arg1;
@@ -736,15 +735,14 @@ static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
- led_reg = rt2x00dev->led_reg;
- rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1);
- else
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1);
+ rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
+ rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
+ (rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
+ rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
+ (rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
- arg0 = led_reg & 0xff;
- arg1 = (led_reg >> 8) & 0xff;
+ arg0 = rt2x00dev->led_reg & 0xff;
+ arg1 = (rt2x00dev->led_reg >> 8) & 0xff;
rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
}
@@ -1655,16 +1653,16 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
}
rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®);
- if (queue == IEEE80211_TX_QUEUE_DATA0)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA1)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA2)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA3)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1);
- else if (queue == IEEE80211_TX_QUEUE_DATA4)
- rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, 1);
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0,
+ (queue == IEEE80211_TX_QUEUE_DATA0));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1,
+ (queue == IEEE80211_TX_QUEUE_DATA1));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2,
+ (queue == IEEE80211_TX_QUEUE_DATA2));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3,
+ (queue == IEEE80211_TX_QUEUE_DATA3));
+ rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT,
+ (queue == IEEE80211_TX_QUEUE_DATA4));
rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 07224c0..048f9f4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -200,8 +200,8 @@ rf_write:
* all others contain 20 bits.
*/
rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS,
- 20 + !!(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527)));
+ 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2527)));
rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0);
rt2x00_set_field32(®, PHY_CSR4_BUSY, 1);
@@ -412,7 +412,7 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !!(rt2x00dev->curr_hwmode != HWMODE_A));
+ (rt2x00dev->curr_hwmode != HWMODE_A));
break;
case ANTENNA_A:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
@@ -531,17 +531,17 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
if (rt2x00dev->curr_hwmode == HWMODE_A) {
sel = antenna_sel_a;
lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1);
} else {
sel = antenna_sel_bg;
lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1);
- rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0);
}
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
+ (rt2x00dev->curr_hwmode == HWMODE_B ||
+ rt2x00dev->curr_hwmode == HWMODE_G));
+ rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
+ (rt2x00dev->curr_hwmode == HWMODE_A));
+
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
@@ -614,12 +614,10 @@ static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev)
rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
- rt2x00_set_field16(&rt2x00dev->led_reg,
- MCU_LEDCS_LINK_A_STATUS, 1);
- else
- rt2x00_set_field16(&rt2x00dev->led_reg,
- MCU_LEDCS_LINK_BG_STATUS, 1);
+ rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
+ (rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
+ rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
+ (rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
rt2x00dev->led_reg, REGISTER_TIMEOUT);
--
1.5.3.4
next prev parent reply other threads:[~2007-10-27 11:25 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-27 11:34 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2007-10-27 11:35 ` [PATCH 1/21] rt2x00: Move quality statistics into seperate structure Ivo van Doorn
2007-10-27 11:35 ` [PATCH 2/21] rt2x00: Use enum defines Ivo van Doorn
2007-10-27 11:36 ` [PATCH 3/21] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 Ivo van Doorn
2007-10-27 11:36 ` [PATCH 4/21] rt2x00: SW diversity should default to antenna B Ivo van Doorn
2007-10-27 11:37 ` [PATCH 5/21] rt2x00: Remove rt2x00_clear_link Ivo van Doorn
2007-10-27 11:37 ` [PATCH 6/21] rt2x00: Implement SW diversity Ivo van Doorn
2007-10-27 11:38 ` Ivo van Doorn [this message]
2007-10-27 11:38 ` [PATCH 8/21] rt2x00: Fix antenna selection Ivo van Doorn
2007-10-27 11:39 ` [PATCH 9/21] rt2x00: Release rt2x00 2.0.11 Ivo van Doorn
2007-10-27 11:39 ` [PATCH 10/21] rt2x00: Disable RX when switching antenna Ivo van Doorn
2007-10-27 11:39 ` [PATCH 11/21] rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna Ivo van Doorn
2007-10-27 11:40 ` [PATCH 12/21] rt2x00: Input-polldev requires input device Ivo van Doorn
2007-10-27 11:40 ` [PATCH 13/21] rt2x00: Detect initial rfkill state on register Ivo van Doorn
2007-10-27 11:41 ` [PATCH 14/21] rt2x00: Unconstify rt2x00dev Ivo van Doorn
2007-10-27 11:41 ` [PATCH 15/21] rt2x00: Rework rt61 antenna selection Ivo van Doorn
2007-10-27 11:42 ` [PATCH 16/21] rt2x00: Remove unused variables Ivo van Doorn
2007-10-27 11:42 ` [PATCH 17/21] rt2x00: Rework rt73 antenna selection Ivo van Doorn
2007-10-27 11:43 ` [PATCH 18/21] rt2x00: Remove data_desc structure Ivo van Doorn
2007-10-27 11:43 ` [PATCH 19/21] rt2x00: Place mutex around USB register access Ivo van Doorn
2007-10-27 11:43 ` [PATCH 20/21] rt2x00: Correctly set ACK bit in tx descriptors Ivo van Doorn
2007-10-27 11:44 ` [PATCH 21/21] rt2x00: Release rt2x00 2.0.12 Ivo van Doorn
2007-10-27 12:47 ` [Rt2400-devel] Please pull 'upstream' branch of rt2x00 John W. Linville
2007-10-27 14:45 ` Ivo van Doorn
2007-10-27 16:19 ` Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710271338.13543.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.