From: Adrian Bunk <bunk@kernel.org>
To: Nick Sillik <n.sillik@temple.edu>,
David Brownell <david-b@pacbell.net>,
Greg Kroah-Hartman <gregkh@suse.de>,
dmitry.torokhov@gmail.com
Cc: linux-input@atrey.karlin.mff.cuni.cz,
linux-kernel@vger.kernel.org,
linux-usb-devel@lists.sourceforge.net
Subject: [RFC: 2.6 patch] remove the USB_STORAGE_ONETOUCH driver
Date: Sun, 28 Oct 2007 16:52:12 +0100 [thread overview]
Message-ID: <20071028155212.GC7227@stusta.de> (raw)
Nearly two years ago, USB_STORAGE_ONETOUCH got a dependency on !PM.
Considering that this also implies that the driver is not available
e.g. when ACPI is enabled in the kernel that's not far from a dependency
on BROKEN.
This patch therefore removes this driver.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
---
drivers/usb/storage/Kconfig | 12 -
drivers/usb/storage/Makefile | 1
drivers/usb/storage/onetouch.c | 237 -----------------------------
drivers/usb/storage/onetouch.h | 9 -
drivers/usb/storage/unusual_devs.h | 17 --
drivers/usb/storage/usb.c | 3
6 files changed, 279 deletions(-)
876e6730e6fb60856da318ad652a912757359f44
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 7e53333..9b7df5f 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -121,18 +121,6 @@ config USB_STORAGE_ALAUDA
These devices are based on the Alauda chip and support both
XD and SmartMedia cards.
-config USB_STORAGE_ONETOUCH
- bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
- depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM
- help
- Say Y here to include additional code to support the Maxtor OneTouch
- USB hard drive's onetouch button.
-
- This code registers the button on the front of Maxtor OneTouch USB
- hard drive's as an input device. An action can be associated with
- this input in any keybinding software. (e.g. gnome's keyboard short-
- cuts)
-
config USB_STORAGE_KARMA
bool "Support for Rio Karma music player"
depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 023969b..a93ae7a 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -19,7 +19,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
deleted file mode 100644
index dfd42fe..0000000
--- a/drivers/usb/storage/onetouch.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Support for the Maxtor OneTouch USB hard drive's button
- *
- * Current development and maintenance by:
- * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
- *
- * Initial work by:
- * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
- *
- * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb/input.h>
-#include "usb.h"
-#include "onetouch.h"
-#include "debug.h"
-
-void onetouch_release_input(void *onetouch_);
-
-struct usb_onetouch {
- char name[128];
- char phys[64];
- struct input_dev *dev; /* input device interface */
- struct usb_device *udev; /* usb device */
-
- struct urb *irq; /* urb for interrupt in report */
- unsigned char *data; /* input data */
- dma_addr_t data_dma;
- unsigned int is_open:1;
-};
-
-static void usb_onetouch_irq(struct urb *urb)
-{
- struct usb_onetouch *onetouch = urb->context;
- signed char *data = onetouch->data;
- struct input_dev *dev = onetouch->dev;
- int status = urb->status;
- int retval;
-
- switch (status) {
- case 0: /* success */
- break;
- case -ECONNRESET: /* unlink */
- case -ENOENT:
- case -ESHUTDOWN:
- return;
- /* -EPIPE: should clear the halt */
- default: /* error */
- goto resubmit;
- }
-
- input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
- input_sync(dev);
-
-resubmit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("can't resubmit intr, %s-%s/input0, retval %d",
- onetouch->udev->bus->bus_name,
- onetouch->udev->devpath, retval);
-}
-
-static int usb_onetouch_open(struct input_dev *dev)
-{
- struct usb_onetouch *onetouch = input_get_drvdata(dev);
-
- onetouch->is_open = 1;
- onetouch->irq->dev = onetouch->udev;
- if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
- err("usb_submit_urb failed");
- return -EIO;
- }
-
- return 0;
-}
-
-static void usb_onetouch_close(struct input_dev *dev)
-{
- struct usb_onetouch *onetouch = input_get_drvdata(dev);
-
- usb_kill_urb(onetouch->irq);
- onetouch->is_open = 0;
-}
-
-#ifdef CONFIG_PM
-static void usb_onetouch_pm_hook(struct us_data *us, int action)
-{
- struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
-
- if (onetouch->is_open) {
- switch (action) {
- case US_SUSPEND:
- usb_kill_urb(onetouch->irq);
- break;
- case US_RESUME:
- if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
- err("usb_submit_urb failed");
- break;
- default:
- break;
- }
- }
-}
-#endif /* CONFIG_PM */
-
-int onetouch_connect_input(struct us_data *ss)
-{
- struct usb_device *udev = ss->pusb_dev;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_onetouch *onetouch;
- struct input_dev *input_dev;
- int pipe, maxp;
- int error = -ENOMEM;
-
- interface = ss->pusb_intf->cur_altsetting;
-
- if (interface->desc.bNumEndpoints != 3)
- return -ENODEV;
-
- endpoint = &interface->endpoint[2].desc;
- if (!usb_endpoint_is_int_in(endpoint))
- return -ENODEV;
-
- pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-
- onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!onetouch || !input_dev)
- goto fail1;
-
- onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
- GFP_ATOMIC, &onetouch->data_dma);
- if (!onetouch->data)
- goto fail1;
-
- onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!onetouch->irq)
- goto fail2;
-
- onetouch->udev = udev;
- onetouch->dev = input_dev;
-
- if (udev->manufacturer)
- strlcpy(onetouch->name, udev->manufacturer,
- sizeof(onetouch->name));
- if (udev->product) {
- if (udev->manufacturer)
- strlcat(onetouch->name, " ", sizeof(onetouch->name));
- strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
- }
-
- if (!strlen(onetouch->name))
- snprintf(onetouch->name, sizeof(onetouch->name),
- "Maxtor Onetouch %04x:%04x",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct));
-
- usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
- strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
-
- input_dev->name = onetouch->name;
- input_dev->phys = onetouch->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->dev.parent = &udev->dev;
-
- set_bit(EV_KEY, input_dev->evbit);
- set_bit(ONETOUCH_BUTTON, input_dev->keybit);
- clear_bit(0, input_dev->keybit);
-
- input_set_drvdata(input_dev, onetouch);
-
- input_dev->open = usb_onetouch_open;
- input_dev->close = usb_onetouch_close;
-
- usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
- (maxp > 8 ? 8 : maxp),
- usb_onetouch_irq, onetouch, endpoint->bInterval);
- onetouch->irq->transfer_dma = onetouch->data_dma;
- onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- ss->extra_destructor = onetouch_release_input;
- ss->extra = onetouch;
-#ifdef CONFIG_PM
- ss->suspend_resume_hook = usb_onetouch_pm_hook;
-#endif
-
- error = input_register_device(onetouch->dev);
- if (error)
- goto fail3;
-
- return 0;
-
- fail3: usb_free_urb(onetouch->irq);
- fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN,
- onetouch->data, onetouch->data_dma);
- fail1: kfree(onetouch);
- input_free_device(input_dev);
- return error;
-}
-
-void onetouch_release_input(void *onetouch_)
-{
- struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
-
- if (onetouch) {
- usb_kill_urb(onetouch->irq);
- input_unregister_device(onetouch->dev);
- usb_free_urb(onetouch->irq);
- usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
- onetouch->data, onetouch->data_dma);
- }
-}
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
deleted file mode 100644
index 41c7aa8..0000000
--- a/drivers/usb/storage/onetouch.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ONETOUCH_H_
-#define _ONETOUCH_H_
-
-#define ONETOUCH_PKT_LEN 0x02
-#define ONETOUCH_BUTTON KEY_PROG1
-
-int onetouch_connect_input(struct us_data *ss);
-
-#endif
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 22ab238..2d18eae 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1282,23 +1282,6 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
US_FL_SINGLE_LUN ),
#endif
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
- * Needed for OneTouch extension to usb-storage
- *
- */
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
- UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
- "Maxtor",
- "OneTouch External Harddrive",
- US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
- 0),
- UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
- "Maxtor",
- "OneTouch External Harddrive",
- US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
- 0),
-#endif
-
/*
* Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
* The device blatantly ignores LUN and returns 1 in GetMaxLUN.
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index ac6114e..2691fa4 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -92,9 +92,6 @@
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-#include "onetouch.h"
-#endif
#ifdef CONFIG_USB_STORAGE_ALAUDA
#include "alauda.h"
#endif
next reply other threads:[~2007-10-28 15:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-28 15:52 Adrian Bunk [this message]
2007-10-28 17:48 ` [RFC: 2.6 patch] remove the USB_STORAGE_ONETOUCH driver Torsten Kaiser
2007-10-28 20:39 ` Jiri Kosina
2007-10-29 2:38 ` Dmitry Torokhov
2007-10-29 2:38 ` Dmitry Torokhov
2007-10-29 6:01 ` Torsten Kaiser
2007-10-29 14:22 ` Alan Stern
2007-10-29 14:22 ` [linux-usb-devel] " Alan Stern
2007-10-29 14:28 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071028155212.GC7227@stusta.de \
--to=bunk@kernel.org \
--cc=david-b@pacbell.net \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@suse.de \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
--cc=n.sillik@temple.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.