- watchdog-add-nano-7240-driver.patch removed from -mm tree

[akpm@linux-foundation.org]

The patch titled
     watchdog: add Nano 7240 driver
has been removed from the -mm tree.  Its filename was
     watchdog-add-nano-7240-driver.patch

This patch was dropped because an updated version will be merged

------------------------------------------------------
Subject: watchdog: add Nano 7240 driver
From: Gilles Gigan<gilles.gigan@gmail.com>

Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI.

Tested on Nano-7240RS.

Hardware documentation of the platform (including watchdog) can be found
on the IEI website: http://www.ieiworld.com

Signed-off-by: Gilles Gigan <gilles.gigan@gmail.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/char/watchdog/sbc7240_wdt.c |  303 ++++++++++++++++++++++++++
 drivers/watchdog/Kconfig            |   13 +
 drivers/watchdog/Makefile           |    1 
 3 files changed, 317 insertions(+)

diff -puN /dev/null drivers/char/watchdog/sbc7240_wdt.c
--- /dev/null
+++ a/drivers/char/watchdog/sbc7240_wdt.c
@@ -0,0 +1,303 @@
+/*
+ *	NANO7240 SBC Watchdog device driver
+ *
+ *	Based on w83877f.c by Scott Jennings,
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License version 2 as
+ *	published by the Free Software Foundation;
+ *
+ *	Software distributed under the License is distributed on an "AS IS"
+ *	basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *	implied. See the License for the specific language governing
+ *	rights and limitations under the License.
+ *
+ *	(c) Copyright 2007  Gilles GIGAN <gilles.gigan@jcu.edu.au>
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/notifier.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#define SBC7240_PREFIX "sbc7240_wdt: "
+
+#define SBC7240_ENABLE_PORT		0x443
+#define SBC7240_DISABLE_PORT		0x043
+#define SBC7240_SET_TIMEOUT_PORT	SBC7240_ENABLE_PORT
+#define SBC7240_MAGIC_CHAR		'V'
+
+#define SBC7240_TIMEOUT		30
+#define SBC7240_MAX_TIMEOUT		255
+static int timeout = SBC7240_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<="
+		  __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default="
+		  __MODULE_STRING(SBC7240_TIMEOUT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file");
+
+#define OPEN_STATUS_BIT			0
+#define ENABLED_STATUS_BIT		1
+static unsigned long wdt_status;
+
+/*
+ * Utility routines
+ */
+
+static void wdt_disable(void)
+{
+	/* disable the watchdog */
+	if (test_and_clear_bit(ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_DISABLE_PORT);
+		printk(KERN_INFO SBC7240_PREFIX 
+		       "Watchdog timer is now disabled.\n");
+	}
+}
+
+static void wdt_enable(void)
+{
+	/* enable the watchdog */
+	if (!test_and_set_bit(ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_ENABLE_PORT);
+		printk(KERN_INFO SBC7240_PREFIX 
+		       "Watchdog timer is now enabled.\n");
+	}
+}
+
+static int wdt_set_timeout(int t)
+{
+	if (t < 1 || t > SBC7240_MAX_TIMEOUT) {
+		printk(KERN_ERR SBC7240_PREFIX 
+		       "timeout value must be 1<=x<=%d\n",
+		       SBC7240_MAX_TIMEOUT);
+		return -1;
+	}
+	/* set the timeout */
+	outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT);
+	printk(KERN_INFO SBC7240_PREFIX "timeout set to %d seconds\n", t);
+	return 0;
+}
+
+/* Whack the dog */
+static inline void wdt_keepalive(void)
+{
+	if (test_bit(ENABLED_STATUS_BIT, &wdt_status))
+		inb_p(SBC7240_ENABLE_PORT);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+static ssize_t fop_write(struct file *file, const char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	size_t i;
+	char c;
+	int got_magic_char = 0;
+
+	/* is there a magic char ? */
+	for (i = 0; i != count; i++) {
+		if (get_user(c, buf + i))
+			return -EFAULT;
+		if (c == SBC7240_MAGIC_CHAR) {
+			got_magic_char = 1;
+			break;
+		}
+	}
+
+	if (got_magic_char)
+		wdt_disable();
+	else
+		wdt_keepalive();
+
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(OPEN_STATUS_BIT, &wdt_status))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (!nowayout)
+		wdt_disable();
+
+	clear_bit(OPEN_STATUS_BIT, &wdt_status);
+	return 0;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_KEEPALIVEPING |WDIOF_SETTIMEOUT |
+		   WDIOF_MAGICCLOSE,
+	.firmware_version = 1,
+	.identity = "SBC7240",
+};
+
+
+static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+		      unsigned long arg)
+{
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user
+			((void __user *)arg, &ident, sizeof(ident))
+			 ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int __user *)arg);
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETOPTIONS:{
+			int retval = -EINVAL;
+
+			if (arg & WDIOS_DISABLECARD) {
+				wdt_disable();
+				retval = 0;
+			}
+
+			if (arg & WDIOS_ENABLECARD) {
+				wdt_enable();
+				retval = 0;
+			}
+
+			return retval;
+		}
+	case WDIOC_SETTIMEOUT:{
+			int new_timeout;
+
+			if (get_user(new_timeout, (int __user *)arg))
+				return -EFAULT;
+
+			if (wdt_set_timeout(new_timeout))
+				return -EINVAL;
+
+			timeout = new_timeout;
+			return 0;
+		}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, (int __user *)arg);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = fop_write,
+	.open = fop_open,
+	.release = fop_close,
+	.ioctl = fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+			   void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit sbc7240_wdt_unload(void)
+{
+	printk(KERN_INFO SBC7240_PREFIX "Removing watchdog\n");
+	misc_deregister(&wdt_miscdev);
+
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(SBC7240_ENABLE_PORT, 1);
+}
+
+static int __init sbc7240_wdt_init(void)
+{
+	int rc = -EBUSY;
+
+	if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) {
+		printk(KERN_ERR SBC7240_PREFIX "I/O address 0x%04x already in use\n",
+		       SBC7240_ENABLE_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* The IO port 0x043 used to disable the watchdog
+	 * is already claimed by the system timer, so we
+	 * cant request_region() it ...*/
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		printk(KERN_ERR SBC7240_PREFIX
+		       "cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_region1;
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		printk(KERN_ERR SBC7240_PREFIX
+		       "cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_miscdev;
+	}
+
+	if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
+		timeout = SBC7240_TIMEOUT;
+		printk(KERN_INFO SBC7240_PREFIX
+		       "timeout value must be 1<=x<=%d, using %d\n",
+		       SBC7240_MAX_TIMEOUT, timeout);
+	}
+	wdt_set_timeout(timeout);
+
+	printk(KERN_INFO SBC7240_PREFIX
+	       "Watchdog driver for SBC7240 initialised (nowayout=%d)\n",
+	       nowayout);
+
+	return 0;
+
+err_out_miscdev:
+	misc_deregister(&wdt_miscdev);
+err_out_region1:
+	release_region(SBC7240_ENABLE_PORT, 1);
+err_out:
+	return rc;
+}
+
+module_init(sbc7240_wdt_init);
+module_exit(sbc7240_wdt_unload);
+
+MODULE_AUTHOR("Gilles Gigan");
+MODULE_DESCRIPTION("Watchdog device driver for single board"
+		   " computers EPIC Nano 7240 from iEi");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
diff -puN drivers/watchdog/Kconfig~watchdog-add-nano-7240-driver drivers/watchdog/Kconfig
--- a/drivers/watchdog/Kconfig~watchdog-add-nano-7240-driver
+++ a/drivers/watchdog/Kconfig
@@ -459,6 +459,19 @@ config SBC8360_WDT
 
 	  Most people will say N.
 
+config SBC7240_WDT
+	tristate "SBC Nano 7240 Watchdog Timer"
+	depends on X86_32
+	---help---
+	  This is the driver for the hardware watchdog found on the IEI
+	  single board computers EPIC Nano 7240 (and likely others). This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc7240_wdt.
+
 config CPU5_WDT
 	tristate "SMA CPU5 Watchdog"
 	depends on X86
diff -puN drivers/watchdog/Makefile~watchdog-add-nano-7240-driver drivers/watchdog/Makefile
--- a/drivers/watchdog/Makefile~watchdog-add-nano-7240-driver
+++ a/drivers/watchdog/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
+obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
 obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
 obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
 obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
_

Patches currently in -mm which might be from gilles.gigan@gmail.com are

watchdog-add-nano-7240-driver.patch
watchdog-add-nano-7240-driver-checkpatch-fixes.patch