From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Subject: Re: [PATCH 7/15] ide: remove atapi_ireason_t
Date: Fri, 2 Nov 2007 21:21:24 +0100 [thread overview]
Message-ID: <200711022121.24688.bzolnier@gmail.com> (raw)
In-Reply-To: <200710310028.27935.bzolnier@gmail.com>
On Wednesday 31 October 2007, Bartlomiej Zolnierkiewicz wrote:
>
> Remove atapi_ireason_t.
>
> While at it:
> * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
[...]
[PATCH] ide: remove atapi_ireason_t (take 2)
Remove atapi_ireason_t.
While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)
v2:
* v1 had CD and IO bits reversed in many places.
* Use CD and IO defines from <linux/hdreg.h>.
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-floppy.c | 25 ++++++++++++-------------
drivers/ide/ide-tape.c | 27 +++++++++++++--------------
drivers/scsi/ide-scsi.c | 17 ++++++++---------
include/linux/ide.h | 24 ------------------------
4 files changed, 33 insertions(+), 60 deletions(-)
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -788,12 +788,11 @@ static ide_startstop_t idefloppy_pc_intr
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- atapi_ireason_t ireason;
idefloppy_pc_t *pc = floppy->pc;
struct request *rq = pc->rq;
unsigned int temp;
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
__FUNCTION__);
@@ -852,18 +851,18 @@ static ide_startstop_t idefloppy_pc_intr
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
/* on this interrupt */
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & CD) {
printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n");
return ide_do_reset(drive);
}
- if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
+ if ((ireason & IO) == test_bit(PC_WRITING, &pc->flags)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-floppy: We wanted to %s, ",
- ireason.b.io ? "Write":"Read");
+ (ireason & IO) ? "Write" : "Read");
printk(KERN_ERR "but the floppy wants us to %s !\n",
- ireason.b.io ? "Read":"Write");
+ (ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
if (!test_bit(PC_WRITING, &pc->flags)) {
@@ -920,15 +919,15 @@ static ide_startstop_t idefloppy_transfe
{
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
- atapi_ireason_t ireason;
+ u8 ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk(KERN_ERR "ide-floppy: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = drive->hwif->INB(IDE_IREASON_REG);
+ if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
return ide_do_reset(drive);
@@ -968,15 +967,15 @@ static ide_startstop_t idefloppy_transfe
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
- atapi_ireason_t ireason;
+ u8 ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk(KERN_ERR "ide-floppy: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = drive->hwif->INB(IDE_IREASON_REG);
+ if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
"while issuing a packet command\n");
return ide_do_reset(drive);
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1847,14 +1847,13 @@ static ide_startstop_t idetape_pc_intr (
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- atapi_ireason_t ireason;
idetape_pc_t *pc = tape->pc;
unsigned int temp;
#if SIMULATE_ERRORS
static int error_sim_count = 0;
#endif
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 4)
@@ -1965,18 +1964,18 @@ static ide_startstop_t idetape_pc_intr (
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
- ireason.all = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & CD) {
printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n");
return ide_do_reset(drive);
}
- if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
+ if ((ireason & IO) == test_bit(PC_WRITING, &pc->flags)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-tape: We wanted to %s, ",
- ireason.b.io ? "Write":"Read");
+ (ireason & IO) ? "Write" : "Read");
printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n",
- ireason.b.io ? "Read":"Write");
+ (ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
if (!test_bit(PC_WRITING, &pc->flags)) {
@@ -2070,28 +2069,28 @@ static ide_startstop_t idetape_transfer_
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
- atapi_ireason_t ireason;
int retries = 100;
ide_startstop_t startstop;
+ u8 ireason;
if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = hwif->INB(IDE_IREASON_REG);
- while (retries-- && (!ireason.b.cod || ireason.b.io)) {
+ ireason = hwif->INB(IDE_IREASON_REG);
+ while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n");
udelay(100);
- ireason.all = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
if (retries == 0) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while "
"issuing a packet command, ignoring\n");
- ireason.b.cod = 1;
- ireason.b.io = 0;
+ ireason |= CD;
+ ireason &= ~IO;
}
}
- if (!ireason.b.cod || ireason.b.io) {
+ if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing "
"a packet command\n");
return ide_do_reset(drive);
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -403,10 +403,9 @@ static ide_startstop_t idescsi_pc_intr (
ide_hwif_t *hwif = drive->hwif;
idescsi_pc_t *pc = scsi->pc;
struct request *rq = pc->rq;
- atapi_ireason_t ireason;
unsigned int temp;
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
#if IDESCSI_DEBUG_LOG
printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
@@ -444,13 +443,13 @@ static ide_startstop_t idescsi_pc_intr (
}
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & CD) {
printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
return ide_do_reset (drive);
}
- if (ireason.b.io) {
+ if (ireason & IO) {
temp = pc->actually_transferred + bcount;
if (temp > pc->request_transfer) {
if (temp > pc->buffer_size) {
@@ -479,7 +478,7 @@ static ide_startstop_t idescsi_pc_intr (
#endif /* IDESCSI_DEBUG_LOG */
}
}
- if (ireason.b.io) {
+ if (ireason & IO) {
clear_bit(PC_WRITING, &pc->flags);
if (pc->sg)
idescsi_input_buffers(drive, pc, bcount);
@@ -508,16 +507,16 @@ static ide_startstop_t idescsi_transfer_
ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
idescsi_pc_t *pc = scsi->pc;
- atapi_ireason_t ireason;
ide_startstop_t startstop;
+ u8 ireason;
if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
printk(KERN_ERR "ide-scsi: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = hwif->INB(IDE_IREASON_REG);
+ if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
return ide_do_reset (drive);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -346,30 +346,6 @@ typedef union {
} select_t, ata_select_t;
/*
- * ATAPI Interrupt Reason Register.
- *
- * cod : Information transferred is command (1) or data (0)
- * io : The device requests us to read (1) or write (0)
- * reserved : Reserved
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned cod :1;
- unsigned io :1;
- unsigned reserved :6;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved :6;
- unsigned io :1;
- unsigned cod :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} atapi_ireason_t;
-
-/*
* Status returned from various ide_ functions
*/
typedef enum {
next prev parent reply other threads:[~2007-11-02 22:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-30 23:28 [PATCH 7/15] ide: remove atapi_ireason_t Bartlomiej Zolnierkiewicz
2007-11-02 20:21 ` Bartlomiej Zolnierkiewicz [this message]
2007-11-04 14:57 ` Sergei Shtylyov
2007-11-05 20:24 ` Bartlomiej Zolnierkiewicz
2007-11-06 18:01 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200711022121.24688.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.