All of lore.kernel.org
 help / color / mirror / Atom feed
From: Olof Johansson <olof@lixom.net>
To: Roel Kluin <12o3l@tiscali.nl>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH] pasemi: clean up gpio_mdio init
Date: Sun, 4 Nov 2007 15:37:09 -0600	[thread overview]
Message-ID: <20071104213709.GA13266@lixom.net> (raw)
In-Reply-To: <472E0569.7070601@tiscali.nl>

pasemi: clean up mdio_gpio driver init

Misc cleanups of mdio_gpio:
* Better error handling/unrolling in case of init/alloc failures
* Go through child nodes and get their interrupts instead of using
  hardcoded values
* Remap the GPIO registers at module load/driver init instead of during probe
* Coding style and other misc cleanups

Signed-off-by: Olof Johansson <olof@lixom.net>

---

On Sun, Nov 04, 2007 at 06:46:17PM +0100, Roel Kluin wrote:
> Olof Johansson wrote:
> > On Sun, Nov 04, 2007 at 05:53:40PM +0100, Roel Kluin wrote:
> >> I think this is how it should be done, but
> >> please review: it was not tested.
> > 
> > Hi,
> > 
> > Thanks for the bug report. The mdio driver needs a set of other cleanups
> > as well. I have a more comprehensive patch that I'll post tomorrow after
> > I have a chance to test them.
> 
> Ok, that's fine with me,

This is what I'll queue up for 2.6.25.


-Olof

diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index dae9f65..2254091 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -218,45 +218,27 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *np = ofdev->node;
-	struct device_node *gpio_np;
+	struct device_node *phy_dn, *np = ofdev->node;
 	struct mii_bus *new_bus;
-	struct resource res;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
-	int err = 0;
+	int err;
 	int i;
 
-	gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
-
-	if (!gpio_np)
-		return -ENODEV;
-
-	err = of_address_to_resource(gpio_np, 0, &res);
-	of_node_put(gpio_np);
-
-	if (err)
-		return -EINVAL;
-
-	if (!gpio_regs)
-		gpio_regs = ioremap(res.start, 0x100);
-
-	if (!gpio_regs)
-		return -EPERM;
-
+	err = -ENOMEM;
 	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return -ENOMEM;
+	if (!priv)
+		goto out;
 
 	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
 
-	if (new_bus == NULL)
-		return -ENOMEM;
+	if (!new_bus)
+		goto out_free_priv;
 
-	new_bus->name = "pasemi gpio mdio bus",
-	new_bus->read = &gpio_mdio_read,
-	new_bus->write = &gpio_mdio_write,
-	new_bus->reset = &gpio_mdio_reset,
+	new_bus->name = "pasemi gpio mdio bus";
+	new_bus->read = &gpio_mdio_read;
+	new_bus->write = &gpio_mdio_write;
+	new_bus->reset = &gpio_mdio_reset;
 
 	prop = of_get_property(np, "reg", NULL);
 	new_bus->id = *prop;
@@ -265,9 +247,24 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->phy_mask = 0;
 
 	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-	for(i = 0; i < PHY_MAX_ADDR; ++i)
-		new_bus->irq[i] = irq_create_mapping(NULL, 10);
 
+	if (!new_bus->irq)
+		goto out_free_bus;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		new_bus->irq[i] = NO_IRQ;
+
+	for (phy_dn = of_get_next_child(np, NULL);
+	     phy_dn != NULL;
+	     phy_dn = of_get_next_child(np, phy_dn)) {
+		const int *ip, *regp;
+
+		ip = of_get_property(phy_dn, "interrupts", NULL);
+		regp = of_get_property(phy_dn, "reg", NULL);
+		if (!ip || !regp)
+			continue;
+		new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
+	}
 
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
@@ -280,17 +277,21 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 
 	err = mdiobus_register(new_bus);
 
-	if (0 != err) {
+	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
 				new_bus->name, err);
-		goto bus_register_fail;
+		goto out_free_irq;
 	}
 
 	return 0;
 
-bus_register_fail:
+out_free_irq:
+	kfree(new_bus->irq);
+out_free_bus:
 	kfree(new_bus);
-
+out_free_priv:
+	kfree(priv);
+out:
 	return err;
 }
 
@@ -330,12 +331,23 @@ static struct of_platform_driver gpio_mdio_driver =
 
 int gpio_mdio_init(void)
 {
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+	if (!np)
+		return -ENODEV;
+	gpio_regs = of_iomap(np, 0);
+	if (!gpio_regs)
+		return -ENODEV;
+
 	return of_register_platform_driver(&gpio_mdio_driver);
 }
+module_init(gpio_mdio_init);
 
 void gpio_mdio_exit(void)
 {
 	of_unregister_platform_driver(&gpio_mdio_driver);
+	if (gpio_regs)
+		iounmap(gpio_regs);
 }
-device_initcall(gpio_mdio_init);
-
+module_exit(gpio_mdio_exit);

  reply	other threads:[~2007-11-04 21:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-04 16:53 [PATCH] Balance alloc/free and ioremap/iounmap in gpio_mdio_probe (powerpc/platforms/pasemi/gpio_mdio.c) Roel Kluin
2007-11-04 17:18 ` Nathan Lynch
2007-11-04 17:44   ` Roel Kluin
2007-11-04 17:47 ` Olof Johansson
2007-11-04 17:46   ` Roel Kluin
2007-11-04 21:37     ` Olof Johansson [this message]
2007-11-05  0:23       ` [PATCH] pasemi: clean up gpio_mdio init Stephen Rothwell
2007-11-05  1:10         ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071104213709.GA13266@lixom.net \
    --to=olof@lixom.net \
    --cc=12o3l@tiscali.nl \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.