All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	torvalds@linux-foundation.org, stable@kernel.org
Subject: Re: Linux 2.6.23.6
Date: Fri, 16 Nov 2007 10:49:03 -0800	[thread overview]
Message-ID: <20071116184903.GL9807@kroah.com> (raw)
In-Reply-To: <20071116184843.GK9807@kroah.com>

diff --git a/Makefile b/Makefile
index e11814e..798ffe9 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 23
-EXTRAVERSION = .5
+EXTRAVERSION = .6
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 2cbb9aa..37b651e 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -170,8 +170,8 @@ static int acpi_pm_finish(suspend_state_t pm_state)
 {
 	u32 acpi_state = acpi_target_sleep_state;
 
-	acpi_leave_sleep_state(acpi_state);
 	acpi_disable_wakeup_device(acpi_state);
+	acpi_leave_sleep_state(acpi_state);
 
 	/* reset firmware waking vector */
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -256,8 +256,8 @@ static int acpi_hibernation_enter(void)
 
 static void acpi_hibernation_finish(void)
 {
-	acpi_leave_sleep_state(ACPI_STATE_S4);
 	acpi_disable_wakeup_device(ACPI_STATE_S4);
+	acpi_leave_sleep_state(ACPI_STATE_S4);
 
 	/* reset firmware waking vector */
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -389,6 +389,7 @@ static void acpi_power_off(void)
 	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 	printk("%s called\n", __FUNCTION__);
 	local_irq_disable();
+	acpi_enable_wakeup_device(ACPI_STATE_S5);
 	acpi_enter_sleep_state(ACPI_STATE_S5);
 }
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c168203..d684208 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -41,6 +41,7 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
@@ -231,6 +232,7 @@ static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
 static void ahci_error_handler(struct ata_port *ap);
 static void ahci_vt8251_error_handler(struct ata_port *ap);
+static void ahci_p5wdh_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_resume(struct ata_port *ap);
 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
@@ -329,6 +331,40 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.port_stop		= ahci_port_stop,
 };
 
+static const struct ata_port_operations ahci_p5wdh_ops = {
+	.port_disable		= ata_port_disable,
+
+	.check_status		= ahci_check_status,
+	.check_altstatus	= ahci_check_status,
+	.dev_select		= ata_noop_dev_select,
+
+	.tf_read		= ahci_tf_read,
+
+	.qc_prep		= ahci_qc_prep,
+	.qc_issue		= ahci_qc_issue,
+
+	.irq_clear		= ahci_irq_clear,
+	.irq_on			= ata_dummy_irq_on,
+	.irq_ack		= ata_dummy_irq_ack,
+
+	.scr_read		= ahci_scr_read,
+	.scr_write		= ahci_scr_write,
+
+	.freeze			= ahci_freeze,
+	.thaw			= ahci_thaw,
+
+	.error_handler		= ahci_p5wdh_error_handler,
+	.post_internal_cmd	= ahci_post_internal_cmd,
+
+#ifdef CONFIG_PM
+	.port_suspend		= ahci_port_suspend,
+	.port_resume		= ahci_port_resume,
+#endif
+
+	.port_start		= ahci_port_start,
+	.port_stop		= ahci_port_stop,
+};
+
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
@@ -1176,6 +1212,52 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class,
 	return rc ?: -EAGAIN;
 }
 
+static int ahci_p5wdh_hardreset(struct ata_port *ap, unsigned int *class,
+				unsigned long deadline)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+	struct ata_taskfile tf;
+	int rc;
+
+	ahci_stop_engine(ap);
+
+	/* clear D2H reception area to properly wait for D2H FIS */
+	ata_tf_init(ap->device, &tf);
+	tf.command = 0x80;
+	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+	rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context),
+				 deadline);
+
+	ahci_start_engine(ap);
+
+	if (rc || ata_port_offline(ap))
+		return rc;
+
+	/* spec mandates ">= 2ms" before checking status */
+	msleep(150);
+
+	/* The pseudo configuration device on SIMG4726 attached to
+	 * ASUS P5W-DH Deluxe doesn't send signature FIS after
+	 * hardreset if no device is attached to the first downstream
+	 * port && the pseudo device locks up on SRST w/ PMP==0.  To
+	 * work around this, wait for !BSY only briefly.  If BSY isn't
+	 * cleared, perform CLO and proceed to IDENTIFY (achieved by
+	 * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
+	 *
+	 * Wait for two seconds.  Devices attached to downstream port
+	 * which can't process the following IDENTIFY after this will
+	 * have to be reset again.  For most cases, this should
+	 * suffice while making probing snappish enough.
+	 */
+	rc = ata_wait_ready(ap, jiffies + 2 * HZ);
+	if (rc)
+		ahci_kick_engine(ap, 0);
+
+	return 0;
+}
+
 static void ahci_postreset(struct ata_port *ap, unsigned int *class)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
@@ -1556,6 +1638,19 @@ static void ahci_vt8251_error_handler(struct ata_port *ap)
 		  ahci_postreset);
 }
 
+static void ahci_p5wdh_error_handler(struct ata_port *ap)
+{
+	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+		/* restart engine */
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
+	}
+
+	/* perform recovery */
+	ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
+		  ahci_postreset);
+}
+
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
@@ -1802,6 +1897,51 @@ static void ahci_print_info(struct ata_host *host)
 		);
 }
 
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
+ * hardwired to on-board SIMG 4726.  The chipset is ICH8 and doesn't
+ * support PMP and the 4726 either directly exports the device
+ * attached to the first downstream port or acts as a hardware storage
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
+ * other configuration).
+ *
+ * When there's no device attached to the first downstream port of the
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
+ * configure the 4726.  However, ATA emulation of the device is very
+ * lame.  It doesn't send signature D2H Reg FIS after the initial
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
+ *
+ * The following function works around the problem by always using
+ * hardreset on the port and not depending on receiving signature FIS
+ * afterward.  If signature FIS isn't received soon, ATA class is
+ * assumed without follow-up softreset.
+ */
+static void ahci_p5wdh_workaround(struct ata_host *host)
+{
+	static struct dmi_system_id sysids[] = {
+		{
+			.ident = "P5W DH Deluxe",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR,
+					  "ASUSTEK COMPUTER INC"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
+			},
+		},
+		{ }
+	};
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+
+	if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
+	    dmi_check_system(sysids)) {
+		struct ata_port *ap = host->ports[1];
+
+		dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
+			   "Deluxe on-board SIMG4726 workaround\n");
+
+		ap->ops = &ahci_p5wdh_ops;
+		ap->flags |= ATA_FLAG_NO_SRST | ATA_FLAG_ASSUME_ATA;
+	}
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -1863,6 +2003,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			ap->ops = &ata_dummy_port_ops;
 	}
 
+	/* apply workaround for ASUS P5W DH Deluxe mainboard */
+	ahci_p5wdh_workaround(host);
+
 	/* initialize adapter */
 	rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
 	if (rc)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 772be09..78b670d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3793,11 +3793,18 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Drives which do spurious command completion */
 	{ "HTS541680J9SA00",	"SB2IC7EP",	ATA_HORKAGE_NONCQ, },
 	{ "HTS541612J9SA00",	"SBDIC7JP",	ATA_HORKAGE_NONCQ, },
+	{ "HDT722516DLA380",	"V43OA96A",	ATA_HORKAGE_NONCQ, },
 	{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
+	{ "Hitachi HTS542525K9SA00", "BBFOC31P", ATA_HORKAGE_NONCQ, },
 	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
+	{ "WDC WD3200AAJS-00RYA0", "12.01B01",	ATA_HORKAGE_NONCQ, },
 	{ "FUJITSU MHV2080BH",	"00840028",	ATA_HORKAGE_NONCQ, },
+	{ "ST9120822AS",	"3.CLF",	ATA_HORKAGE_NONCQ, },
 	{ "ST9160821AS",	"3.CLF",	ATA_HORKAGE_NONCQ, },
-	{ "ST3160812AS",	"3.AD",		ATA_HORKAGE_NONCQ, },
+	{ "ST9160821AS",	"3.ALD",	ATA_HORKAGE_NONCQ, },
+	{ "ST9160821AS",	"3.CCD",	ATA_HORKAGE_NONCQ, },
+	{ "ST3160812AS",	"3.ADJ",	ATA_HORKAGE_NONCQ, },
+	{ "ST980813AS",		"3.ADB",	ATA_HORKAGE_NONCQ, },
 	{ "SAMSUNG HD401LJ",	"ZZ100-15",	ATA_HORKAGE_NONCQ, },
 
 	/* devices which puke on READ_NATIVE_MAX */
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ac6ceed..6ebdbd8 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1759,9 +1759,11 @@ static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
 	return 0;
 }
 
-static int ata_eh_followup_srst_needed(int rc, int classify,
-				       const unsigned int *classes)
+static int ata_eh_followup_srst_needed(struct ata_port *ap, int rc,
+				int classify, const unsigned int *classes)
 {
+	if (ap->flags & ATA_FLAG_NO_SRST)
+		return 0;
 	if (rc == -EAGAIN)
 		return 1;
 	if (rc != 0)
@@ -1792,7 +1794,8 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 	 */
 	action = ehc->i.action;
 	ehc->i.action &= ~ATA_EH_RESET_MASK;
-	if (softreset && (!hardreset || (!sata_set_spd_needed(ap) &&
+	if (softreset && (!hardreset || (!(ap->flags & ATA_FLAG_NO_SRST) &&
+					 !sata_set_spd_needed(ap) &&
 					 !(action & ATA_EH_HARDRESET))))
 		ehc->i.action |= ATA_EH_SOFTRESET;
 	else
@@ -1855,7 +1858,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 	rc = ata_do_reset(ap, reset, classes, deadline);
 
 	if (reset == hardreset &&
-	    ata_eh_followup_srst_needed(rc, classify, classes)) {
+	    ata_eh_followup_srst_needed(ap, rc, classify, classes)) {
 		/* okay, let's do follow-up softreset */
 		reset = softreset;
 
@@ -1870,8 +1873,8 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 		ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK);
 		rc = ata_do_reset(ap, reset, classes, deadline);
 
-		if (rc == 0 && classify &&
-		    classes[0] == ATA_DEV_UNKNOWN) {
+		if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN &&
+		    !(ap->flags & ATA_FLAG_ASSUME_ATA)) {
 			ata_port_printk(ap, KERN_ERR,
 					"classification failed\n");
 			rc = -EINVAL;
@@ -1879,6 +1882,10 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 		}
 	}
 
+	/* if we skipped follow-up srst, clear rc */
+	if (rc == -EAGAIN)
+		rc = 0;
+
 	if (rc && try < ARRAY_SIZE(ata_eh_reset_timeouts)) {
 		unsigned long now = jiffies;
 
@@ -1906,8 +1913,17 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 		/* After the reset, the device state is PIO 0 and the
 		 * controller state is undefined.  Record the mode.
 		 */
-		for (i = 0; i < ATA_MAX_DEVICES; i++)
-			ap->device[i].pio_mode = XFER_PIO_0;
+		for (i = 0; i < ata_port_max_devices(ap); i++) {
+			struct ata_device *dev = &ap->device[i];
+
+			dev->pio_mode = XFER_PIO_0;
+
+			if (ata_port_offline(ap))
+				continue;
+
+			if (ap->flags & ATA_FLAG_ASSUME_ATA)
+				classes[dev->devno] = ATA_DEV_ATA;
+		}
 
 		/* record current link speed */
 		if (sata_scr_read(ap, SCR_STATUS, &sstatus) == 0)
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index bb8e9e9..94d638e 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -553,7 +553,7 @@ int i915_vblank_swap(DRM_IOCTL_ARGS)
 		return DRM_ERR(EBUSY);
 	}
 
-	vbl_swap = drm_calloc(1, sizeof(vbl_swap), DRM_MEM_DRIVER);
+	vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
 
 	if (!vbl_swap) {
 		DRM_ERROR("Failed to allocate memory to queue swap\n");
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index af5790f..2e9fdb9 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -1679,7 +1679,7 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init)
 			dev_priv->gart_info.bus_addr =
 			    dev_priv->pcigart_offset + dev_priv->fb_location;
 			dev_priv->gart_info.mapping.offset =
-			    dev_priv->gart_info.bus_addr;
+			    dev_priv->pcigart_offset + dev_priv->fb_aper_offset;
 			dev_priv->gart_info.mapping.size =
 			    dev_priv->gart_info.table_size;
 
@@ -2291,7 +2291,8 @@ int radeon_driver_firstopen(struct drm_device *dev)
 	if (ret != 0)
 		return ret;
 
-	ret = drm_addmap(dev, drm_get_resource_start(dev, 0),
+	dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0);
+	ret = drm_addmap(dev, dev_priv->fb_aper_offset,
 			 drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER,
 			 _DRM_WRITE_COMBINING, &map);
 	if (ret != 0)
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index 3b3d935..41e91ea 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -293,6 +293,7 @@ typedef struct drm_radeon_private {
 
 	/* starting from here on, data is preserved accross an open */
 	uint32_t flags;		/* see radeon_chip_flags */
+	unsigned long fb_aper_offset;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index ed76f0a..5000b3b 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -1040,14 +1040,14 @@ static void check_xmit_empty(unsigned long data)
 	struct moxa_port *ch;
 
 	ch = (struct moxa_port *) data;
-	del_timer_sync(&moxa_ports[ch->port].emptyTimer);
 	if (ch->tty && (ch->statusflags & EMPTYWAIT)) {
 		if (MoxaPortTxQueue(ch->port) == 0) {
 			ch->statusflags &= ~EMPTYWAIT;
 			tty_wakeup(ch->tty);
 			return;
 		}
-		mod_timer(&moxa_ports[ch->port].emptyTimer, jiffies + HZ);
+		mod_timer(&moxa_ports[ch->port].emptyTimer,
+				round_jiffies(jiffies + HZ));
 	} else
 		ch->statusflags &= ~EMPTYWAIT;
 }
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 56cbba7..94bb3d0 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -699,8 +699,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
 	spin_lock_init(&info->slock);
 	mutex_init(&info->write_mtx);
 	rp_table[line] = info;
-	if (pci_dev)
-		tty_register_device(rocket_driver, line, &pci_dev->dev);
+	tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
+			NULL);
 }
 
 /*
@@ -2434,7 +2434,7 @@ static int __init rp_init(void)
 	rocket_driver->init_termios.c_ispeed = 9600;
 	rocket_driver->init_termios.c_ospeed = 9600;
 #ifdef ROCKET_SOFT_FLOW
-	rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	rocket_driver->flags |= TTY_DRIVER_REAL_RAW;
 #endif
 	tty_set_operations(rocket_driver, &rocket_ops);
 
@@ -2491,10 +2491,14 @@ static void rp_cleanup_module(void)
 	if (retval)
 		printk(KERN_INFO "Error %d while trying to unregister "
 		       "rocketport driver\n", -retval);
-	put_tty_driver(rocket_driver);
 
 	for (i = 0; i < MAX_RP_PORTS; i++)
-		kfree(rp_table[i]);
+		if (rp_table[i]) {
+			tty_unregister_device(rocket_driver, i);
+			kfree(rp_table[i]);
+		}
+
+	put_tty_driver(rocket_driver);
 
 	for (i = 0; i < NUM_BOARDS; i++) {
 		if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 988ae1c..1128153 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -129,7 +129,7 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
 				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
 
 #define FAN_FROM_REG(reg,div)	((reg) == 255 || (reg) == 0 ? 0 : \
-				 1350000 + (reg)*(div) / 2) / ((reg)*(div))
+				 (1350000 + (reg)*(div) / 2) / ((reg)*(div)))
 #define FAN_TO_REG(val,div)	((val)*(div) * 255 <= 1350000 ? 255 : \
 				 (1350000 + (val)*(div) / 2) / ((val)*(div)))
 
@@ -145,7 +145,7 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
 #define CHAN_NO_FAN(nr)		(1 << (nr))
 #define CHAN_TEMP3		(1 << 2)
 #define CHAN_VCC_5V		(1 << 3)
-#define CHAN_NO_VID		(1 << 8)
+#define CHAN_NO_VID		(1 << 7)
 
 /*
  * Functions declaration
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 7a4a15f..329b599 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -391,6 +391,7 @@ static int __devexit w83627hf_remove(struct platform_device *pdev);
 
 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
+static void w83627hf_update_fan_div(struct w83627hf_data *data);
 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
 static void w83627hf_init_device(struct platform_device *pdev);
 
@@ -1244,6 +1245,7 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
 	data->fan_min[0] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(1));
 	data->fan_min[1] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(2));
 	data->fan_min[2] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(3));
+	w83627hf_update_fan_div(data);
 
 	/* Register common device attributes */
 	if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group)))
@@ -1333,6 +1335,24 @@ static int __devexit w83627hf_remove(struct platform_device *pdev)
 }
 
 
+/* Registers 0x50-0x5f are banked */
+static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
+{
+	if ((reg & 0x00f0) == 0x50) {
+		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
+	}
+}
+
+/* Not strictly necessary, but play it safe for now */
+static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
+{
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
+	}
+}
+
 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
 {
 	int res, word_sized;
@@ -1343,12 +1363,7 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
 		  && (((reg & 0x00ff) == 0x50)
 		   || ((reg & 0x00ff) == 0x53)
 		   || ((reg & 0x00ff) == 0x55));
-	if (reg & 0xff00) {
-		outb_p(W83781D_REG_BANK,
-		       data->addr + W83781D_ADDR_REG_OFFSET);
-		outb_p(reg >> 8,
-		       data->addr + W83781D_DATA_REG_OFFSET);
-	}
+	w83627hf_set_bank(data, reg);
 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
 	res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
 	if (word_sized) {
@@ -1358,11 +1373,7 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
 		    (res << 8) + inb_p(data->addr +
 				       W83781D_DATA_REG_OFFSET);
 	}
-	if (reg & 0xff00) {
-		outb_p(W83781D_REG_BANK,
-		       data->addr + W83781D_ADDR_REG_OFFSET);
-		outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
-	}
+	w83627hf_reset_bank(data, reg);
 	mutex_unlock(&data->lock);
 	return res;
 }
@@ -1433,12 +1444,7 @@ static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
 		   || ((reg & 0xff00) == 0x200))
 		  && (((reg & 0x00ff) == 0x53)
 		   || ((reg & 0x00ff) == 0x55));
-	if (reg & 0xff00) {
-		outb_p(W83781D_REG_BANK,
-		       data->addr + W83781D_ADDR_REG_OFFSET);
-		outb_p(reg >> 8,
-		       data->addr + W83781D_DATA_REG_OFFSET);
-	}
+	w83627hf_set_bank(data, reg);
 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
 	if (word_sized) {
 		outb_p(value >> 8,
@@ -1448,11 +1454,7 @@ static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
 	}
 	outb_p(value & 0xff,
 	       data->addr + W83781D_DATA_REG_OFFSET);
-	if (reg & 0xff00) {
-		outb_p(W83781D_REG_BANK,
-		       data->addr + W83781D_ADDR_REG_OFFSET);
-		outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
-	}
+	w83627hf_reset_bank(data, reg);
 	mutex_unlock(&data->lock);
 	return 0;
 }
@@ -1556,6 +1558,24 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
 			    | 0x01);
 }
 
+static void w83627hf_update_fan_div(struct w83627hf_data *data)
+{
+	int reg;
+
+	reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
+	data->fan_div[0] = (reg >> 4) & 0x03;
+	data->fan_div[1] = (reg >> 6) & 0x03;
+	if (data->type != w83697hf) {
+		data->fan_div[2] = (w83627hf_read_value(data,
+				       W83781D_REG_PIN) >> 6) & 0x03;
+	}
+	reg = w83627hf_read_value(data, W83781D_REG_VBAT);
+	data->fan_div[0] |= (reg >> 3) & 0x04;
+	data->fan_div[1] |= (reg >> 4) & 0x04;
+	if (data->type != w83697hf)
+		data->fan_div[2] |= (reg >> 5) & 0x04;
+}
+
 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
 	struct w83627hf_data *data = dev_get_drvdata(dev);
@@ -1633,18 +1653,8 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 			  w83627hf_read_value(data, W83781D_REG_TEMP_HYST(3));
 		}
 
-		i = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = (i >> 6) & 0x03;
-		if (data->type != w83697hf) {
-			data->fan_div[2] = (w83627hf_read_value(data,
-					       W83781D_REG_PIN) >> 6) & 0x03;
-		}
-		i = w83627hf_read_value(data, W83781D_REG_VBAT);
-		data->fan_div[0] |= (i >> 3) & 0x04;
-		data->fan_div[1] |= (i >> 4) & 0x04;
-		if (data->type != w83697hf)
-			data->fan_div[2] |= (i >> 5) & 0x04;
+		w83627hf_update_fan_div(data);
+
 		data->alarms =
 		    w83627hf_read_value(data, W83781D_REG_ALARM1) |
 		    (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 082ca7d..6102aa9 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -84,7 +84,7 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
 
 	/* Set the PIO timings */
 	if ((speed & XFER_MODE) == XFER_PIO) {
-		ide_drive_t *pair = &drive->hwif->drives[drive->dn ^ 1];
+		ide_drive_t *pair = ide_get_paired_drive(drive);
 		u8 cmd, pioa;
 
 		cmd = pioa = speed - XFER_PIO_0;
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 9fead2e..e887058 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -97,6 +97,7 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
 			mode = 2;
 
 		switch(mode) {
+		case 3:	 mask = 0x3f; break;
 		case 2:	 mask = 0x1f; break;
 		case 1:	 mask = 0x07; break;
 		default: mask = 0x00; break;
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 50f6d17..713064d 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -180,7 +180,7 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
 	const u16 data_speed[]	= { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
 
 	ide_hwif_t *hwif	= HWIF(drive);
-	ide_drive_t *pair	= &hwif->drives[drive->dn ^ 1];
+	ide_drive_t *pair	= ide_get_paired_drive(drive);
 	u32 speedt		= 0;
 	u16 speedp		= 0;
 	unsigned long addr	= siimage_seldev(drive, 0x04);
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 01d7008..495c803 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -147,8 +147,12 @@ static struct ib_uobject *__idr_get_uobj(struct idr *idr, int id,
 
 	spin_lock(&ib_uverbs_idr_lock);
 	uobj = idr_find(idr, id);
-	if (uobj)
-		kref_get(&uobj->ref);
+	if (uobj) {
+		if (uobj->context == context)
+			kref_get(&uobj->ref);
+		else
+			uobj = NULL;
+	}
 	spin_unlock(&ib_uverbs_idr_lock);
 
 	return uobj;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index acc9589..6966f94 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -290,6 +290,12 @@ static int mthca_cmd_post(struct mthca_dev *dev,
 		err = mthca_cmd_post_hcr(dev, in_param, out_param, in_modifier,
 					 op_modifier, op, token, event);
 
+	/*
+	 * Make sure that our HCR writes don't get mixed in with
+	 * writes from another CPU starting a FW command.
+	 */
+	mmiowb();
+
 	mutex_unlock(&dev->cmd.hcr_mutex);
 	return err;
 }
diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index 7a69a18..4484a64 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -321,12 +321,15 @@ void b1_reset_ctr(struct capi_ctr *ctrl)
 	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
 	avmcard *card = cinfo->card;
 	unsigned int port = card->port;
+	unsigned long flags;
 
 	b1_reset(port);
 	b1_reset(port);
 
 	memset(cinfo->version, 0, sizeof(cinfo->version));
+	spin_lock_irqsave(&card->lock, flags);
 	capilib_release(&cinfo->ncci_head);
+	spin_unlock_irqrestore(&card->lock, flags);
 	capi_ctr_reseted(ctrl);
 }
 
@@ -361,9 +364,8 @@ void b1_release_appl(struct capi_ctr *ctrl, u16 appl)
 	unsigned int port = card->port;
 	unsigned long flags;
 
-	capilib_release_appl(&cinfo->ncci_head, appl);
-
 	spin_lock_irqsave(&card->lock, flags);
+	capilib_release_appl(&cinfo->ncci_head, appl);
 	b1_put_byte(port, SEND_RELEASE);
 	b1_put_word(port, appl);
 	spin_unlock_irqrestore(&card->lock, flags);
@@ -380,27 +382,27 @@ u16 b1_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
 	u8 subcmd = CAPIMSG_SUBCOMMAND(skb->data);
 	u16 dlen, retval;
 
+	spin_lock_irqsave(&card->lock, flags);
 	if (CAPICMD(cmd, subcmd) == CAPI_DATA_B3_REQ) {
 		retval = capilib_data_b3_req(&cinfo->ncci_head,
 					     CAPIMSG_APPID(skb->data),
 					     CAPIMSG_NCCI(skb->data),
 					     CAPIMSG_MSGID(skb->data));
-		if (retval != CAPI_NOERROR) 
+		if (retval != CAPI_NOERROR) {
+			spin_unlock_irqrestore(&card->lock, flags);
 			return retval;
+		}
 
 		dlen = CAPIMSG_DATALEN(skb->data);
 
-	 	spin_lock_irqsave(&card->lock, flags);
 		b1_put_byte(port, SEND_DATA_B3_REQ);
 		b1_put_slice(port, skb->data, len);
 		b1_put_slice(port, skb->data + len, dlen);
-		spin_unlock_irqrestore(&card->lock, flags);
 	} else {
-	 	spin_lock_irqsave(&card->lock, flags);
 		b1_put_byte(port, SEND_MESSAGE);
 		b1_put_slice(port, skb->data, len);
-		spin_unlock_irqrestore(&card->lock, flags);
 	}
+	spin_unlock_irqrestore(&card->lock, flags);
 
 	dev_kfree_skb_any(skb);
 	return CAPI_NOERROR;
@@ -534,17 +536,17 @@ irqreturn_t b1_interrupt(int interrupt, void *devptr)
 
 		ApplId = (unsigned) b1_get_word(card->port);
 		MsgLen = b1_get_slice(card->port, card->msgbuf);
-		spin_unlock_irqrestore(&card->lock, flags);
 		if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
 			printk(KERN_ERR "%s: incoming packet dropped\n",
 					card->name);
+			spin_unlock_irqrestore(&card->lock, flags);
 		} else {
 			memcpy(skb_put(skb, MsgLen), card->msgbuf, MsgLen);
 			if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_CONF)
 				capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
 						     CAPIMSG_NCCI(skb->data),
 						     CAPIMSG_MSGID(skb->data));
-
+			spin_unlock_irqrestore(&card->lock, flags);
 			capi_ctr_handle_message(ctrl, ApplId, skb);
 		}
 		break;
@@ -554,21 +556,17 @@ irqreturn_t b1_interrupt(int interrupt, void *devptr)
 		ApplId = b1_get_word(card->port);
 		NCCI = b1_get_word(card->port);
 		WindowSize = b1_get_word(card->port);
-		spin_unlock_irqrestore(&card->lock, flags);
-
 		capilib_new_ncci(&cinfo->ncci_head, ApplId, NCCI, WindowSize);
-
+		spin_unlock_irqrestore(&card->lock, flags);
 		break;
 
 	case RECEIVE_FREE_NCCI:
 
 		ApplId = b1_get_word(card->port);
 		NCCI = b1_get_word(card->port);
-		spin_unlock_irqrestore(&card->lock, flags);
-
 		if (NCCI != 0xffffffff)
 			capilib_free_ncci(&cinfo->ncci_head, ApplId, NCCI);
-	       
+		spin_unlock_irqrestore(&card->lock, flags);
 		break;
 
 	case RECEIVE_START:
diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c
index d58f927..8710cf6 100644
--- a/drivers/isdn/hardware/avm/c4.c
+++ b/drivers/isdn/hardware/avm/c4.c
@@ -727,6 +727,7 @@ static void c4_send_init(avmcard *card)
 {
 	struct sk_buff *skb;
 	void *p;
+	unsigned long flags;
 
 	skb = alloc_skb(15, GFP_ATOMIC);
 	if (!skb) {
@@ -744,12 +745,15 @@ static void c4_send_init(avmcard *card)
 	skb_put(skb, (u8 *)p - (u8 *)skb->data);
 
 	skb_queue_tail(&card->dma->send_queue, skb);
+	spin_lock_irqsave(&card->lock, flags);
 	c4_dispatch_tx(card);
+	spin_unlock_irqrestore(&card->lock, flags);
 }
 
 static int queue_sendconfigword(avmcard *card, u32 val)
 {
 	struct sk_buff *skb;
+	unsigned long flags;
 	void *p;
 
 	skb = alloc_skb(3+4, GFP_ATOMIC);
@@ -766,7 +770,9 @@ static int queue_sendconfigword(avmcard *card, u32 val)
 	skb_put(skb, (u8 *)p - (u8 *)skb->data);
 
 	skb_queue_tail(&card->dma->send_queue, skb);
+	spin_lock_irqsave(&card->lock, flags);
 	c4_dispatch_tx(card);
+	spin_unlock_irqrestore(&card->lock, flags);
 	return 0;
 }
 
@@ -986,7 +992,9 @@ static void c4_release_appl(struct capi_ctr *ctrl, u16 appl)
 	struct sk_buff *skb;
 	void *p;
 
+	spin_lock_irqsave(&card->lock, flags);
 	capilib_release_appl(&cinfo->ncci_head, appl);
+	spin_unlock_irqrestore(&card->lock, flags);
 
 	if (ctrl->cnr == card->cardnr) {
 		skb = alloc_skb(7, GFP_ATOMIC);
@@ -1019,7 +1027,8 @@ static u16 c4_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
 	u16 retval = CAPI_NOERROR;
 	unsigned long flags;
 
- 	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
+	spin_lock_irqsave(&card->lock, flags);
+	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
 		retval = capilib_data_b3_req(&cinfo->ncci_head,
 					     CAPIMSG_APPID(skb->data),
 					     CAPIMSG_NCCI(skb->data),
@@ -1027,10 +1036,9 @@ static u16 c4_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
 	}
 	if (retval == CAPI_NOERROR) {
 		skb_queue_tail(&card->dma->send_queue, skb);
-		spin_lock_irqsave(&card->lock, flags);
 		c4_dispatch_tx(card);
-		spin_unlock_irqrestore(&card->lock, flags);
 	}
+	spin_unlock_irqrestore(&card->lock, flags);
 	return retval;
 }
 
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 927cb34..7c426d0 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -274,7 +274,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 			if (bitmap->offset < 0) {
 				/* DATA  BITMAP METADATA  */
 				if (bitmap->offset
-				    + page->index * (PAGE_SIZE/512)
+				    + (long)(page->index * (PAGE_SIZE/512))
 				    + size/512 > 0)
 					/* bitmap runs in to metadata */
 					return -EINVAL;
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 6928c13..9538331 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -305,7 +305,7 @@ static int delay_status(struct dm_target *ti, status_type_t type,
 		       (unsigned long long) dc->start_read,
 		       dc->read_delay);
 		if (dc->dev_write)
-			DMEMIT("%s %llu %u", dc->dev_write->name,
+			DMEMIT(" %s %llu %u", dc->dev_write->name,
 			       (unsigned long long) dc->start_write,
 			       dc->write_delay);
 		break;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 2120155..998d450 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1064,12 +1064,14 @@ static struct mapped_device *alloc_dev(int minor)
 	return NULL;
 }
 
+static void unlock_fs(struct mapped_device *md);
+
 static void free_dev(struct mapped_device *md)
 {
 	int minor = md->disk->first_minor;
 
 	if (md->suspended_bdev) {
-		thaw_bdev(md->suspended_bdev, NULL);
+		unlock_fs(md);
 		bdput(md->suspended_bdev);
 	}
 	mempool_destroy(md->tio_pool);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f96dea9..3808f52 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -377,7 +377,12 @@ static unsigned long get_stripe_work(struct stripe_head *sh)
 		ack++;
 
 	sh->ops.count -= ack;
-	BUG_ON(sh->ops.count < 0);
+	if (unlikely(sh->ops.count < 0)) {
+		printk(KERN_ERR "pending: %#lx ops.pending: %#lx ops.ack: %#lx "
+			"ops.complete: %#lx\n", pending, sh->ops.pending,
+			sh->ops.ack, sh->ops.complete);
+		BUG();
+	}
 
 	return pending;
 }
@@ -551,8 +556,7 @@ static void ops_complete_biofill(void *stripe_head_ref)
 			}
 		}
 	}
-	clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
-	clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+	set_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
 
 	return_io(return_bi);
 
@@ -2630,6 +2634,13 @@ static void handle_stripe5(struct stripe_head *sh)
 	s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
 	/* Now to look around and see what can be done */
 
+	/* clean-up completed biofill operations */
+	if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) {
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
+	}
+
 	rcu_read_lock();
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index be1df85..87e0161 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -132,7 +132,7 @@ void read_msi_msg(unsigned int irq, struct msi_msg *msg)
 			pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
 		} else {
 			msg->address_hi = 0;
-			pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
+			pci_read_config_word(dev, msi_data_reg(pos, 0), &data);
 		}
 		msg->data = data;
 		break;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 0e579ca..ffdd0da 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -365,8 +365,9 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag)
 		scp->result = SAM_STAT_CHECK_CONDITION;
 		memset(&scp->sense_buffer,
 				0, sizeof(scp->sense_buffer));
-		memcpy(&scp->sense_buffer,
-			&req->sg_list, le32_to_cpu(req->dataxfer_length));
+		memcpy(&scp->sense_buffer, &req->sg_list,
+				min(sizeof(scp->sense_buffer),
+					le32_to_cpu(req->dataxfer_length)));
 		break;
 
 	default:
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index b5ebb73..6e2382e 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -19,6 +19,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/rwsem.h>
+
 /* This file contains declarations of usbcore internals that are mostly
  * used or exposed by Host Controller Drivers.
  */
@@ -454,5 +456,9 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
 		: (in_interrupt () ? "in_interrupt" : "can sleep"))
 
 
-#endif /* __KERNEL__ */
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
 
+#endif /* __KERNEL__ */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f7b337f..c3adffa 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -125,6 +125,12 @@ MODULE_PARM_DESC(use_both_schemes,
 		"try the other device initialization scheme if the "
 		"first one fails");
 
+/* Mutual exclusion for EHCI CF initialization.  This interferes with
+ * port reset on some companion controllers.
+ */
+DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
+EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
+
 
 static inline char *portspeed(int portstatus)
 {
@@ -1460,6 +1466,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 {
 	int i, status;
 
+	/* Block EHCI CF initialization during the port reset.
+	 * Some companion controllers don't like it when they mix.
+	 */
+	down_read(&ehci_cf_port_reset_rwsem);
+
 	/* Reset the port */
 	for (i = 0; i < PORT_RESET_TRIES; i++) {
 		status = set_port_feature(hub->hdev,
@@ -1490,7 +1501,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 			usb_set_device_state(udev, status
 					? USB_STATE_NOTATTACHED
 					: USB_STATE_DEFAULT);
-			return status;
+			goto done;
 		}
 
 		dev_dbg (hub->intfdev,
@@ -1503,6 +1514,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		"Cannot enable port %i.  Maybe the USB cable is bad?\n",
 		port1);
 
+ done:
+	up_read(&ehci_cf_port_reset_rwsem);
 	return status;
 }
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ebf3dc2..d42c561 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -32,52 +32,6 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
 	/* HP 5300/5370C scanner */
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
-	/* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */
-	{ USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* SGS Thomson Microelectronics 4in1 card reader */
-	{ USB_DEVICE(0x0483, 0x0321), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */
-	{ USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Benq S2W 3300U */
-	{ USB_DEVICE(0x04a5, 0x20b0), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Canon, Inc. CanoScan N1240U/LiDE30 */
-	{ USB_DEVICE(0x04a9, 0x220e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Canon, Inc. CanoScan N650U/N656U */
-	{ USB_DEVICE(0x04a9, 0x2206), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Canon, Inc. CanoScan 1220U */
-	{ USB_DEVICE(0x04a9, 0x2207), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Canon, Inc. CanoScan N670U/N676U/LiDE 20 */
-	{ USB_DEVICE(0x04a9, 0x220d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* old Cannon scanner */
-	{ USB_DEVICE(0x04a9, 0x2220), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Seiko Epson Corp. Perfection 1200 */
-	{ USB_DEVICE(0x04b8, 0x0104), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Seiko Epson Corp. Perfection 660 */
-	{ USB_DEVICE(0x04b8, 0x0114), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Epson Perfection 1260 Photo */
-	{ USB_DEVICE(0x04b8, 0x011d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Seiko Epson Corp - Perfection 1670 */
-	{ USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* EPSON Perfection 2480 */
-	{ USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Seiko Epson Corp.*/
-	{ USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Samsung ML-2010 printer */
-	{ USB_DEVICE(0x04e8, 0x326c), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Samsung ML-2510 Series printer */
-	{ USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Elsa MicroLink 56k (V.250) */
-	{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Ultima Electronics Corp.*/
-	{ USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* Genesys USB-to-IDE */
-	{ USB_DEVICE(0x0503, 0x0702), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* USB Graphical LCD - EEH Datalink GmbH */
-	{ USB_DEVICE(0x060c, 0x04eb), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -85,44 +39,15 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
-	/* Agfa Snapscan1212u */
-	{ USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Seagate RSS LLC */
-	{ USB_DEVICE(0x0bc2, 0x3000), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	/* Umax [hex] Astra 3400U */
-	{ USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
-	/* Alcor multi-card reader */
-	{ USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* Canon EOS 5D in PC Connection mode */
-	{ USB_DEVICE(0x04a9, 0x3101), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* RIM Blackberry */
-	{ USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	{ USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-	{ USB_DEVICE(0x0fca, 0x0006), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
-	/* Apple iPhone */
-	{ USB_DEVICE(0x05ac, 0x1290), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-
 	/* SKYMEDI USB_DRIVE */
 	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 
 	{ }  /* terminating entry must be last */
 };
 
-static void usb_autosuspend_quirk(struct usb_device *udev)
-{
-#ifdef	CONFIG_USB_SUSPEND
-	/* disable autosuspend, but allow the user to re-enable it via sysfs */
-	udev->autosuspend_disabled = 1;
-#endif
-}
-
 static const struct usb_device_id *find_id(struct usb_device *udev)
 {
 	const struct usb_device_id *id = usb_quirk_list;
@@ -149,13 +74,9 @@ void usb_detect_quirks(struct usb_device *udev)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 				udev->quirks);
 
-	/* do any special quirk handling here if needed */
-	if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND)
-		usb_autosuspend_quirk(udev);
-
 	/* By default, disable autosuspend for all non-hubs */
 #ifdef	CONFIG_USB_SUSPEND
 	if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
-		udev->autosuspend_delay = -1;
+		udev->autosuspend_disabled = 1;
 #endif
 }
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index be63022..3da7979 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -358,7 +358,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 
 	/* enforce simple/standard policy */
 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
-			URB_NO_INTERRUPT);
+			URB_NO_INTERRUPT | URB_FREE_BUFFER);
 	switch (temp) {
 	case PIPE_BULK:
 		if (is_out)
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 593e235..d57de87 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1989,8 +1989,20 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
 	}
 
 	spin_lock_irqsave(&dev->req_lock, flags);
+	/*
+	 * this freelist can be empty if an interrupt triggered disconnect()
+	 * and reconfigured the gadget (shutting down this queue) after the
+	 * network stack decided to xmit but before we got the spinlock.
+	 */
+	if (list_empty(&dev->tx_reqs)) {
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+		return 1;
+	}
+
 	req = container_of (dev->tx_reqs.next, struct usb_request, list);
 	list_del (&req->list);
+
+	/* temporarily stop TX queue when the freelist empties */
 	if (list_empty (&dev->tx_reqs))
 		netif_stop_queue (net);
 	spin_unlock_irqrestore(&dev->req_lock, flags);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 35cdba1..31310ca 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -570,10 +570,18 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * are explicitly handed to companion controller(s), so no TT is
 	 * involved with the root hub.  (Except where one is integrated,
 	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.
 	 */
+	down_write(&ehci_cf_port_reset_rwsem);
 	hcd->state = HC_STATE_RUNNING;
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	up_write(&ehci_cf_port_reset_rwsem);
 
 	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	ehci_info (ehci,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 88a2c7d..9eb4a65 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,14 +208,15 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *
 
 	/* only do something if we have a bulk out endpoint */
 	if (serial->num_bulk_out) {
-		spin_lock_bh(&port->lock);
+		unsigned long flags;
+		spin_lock_irqsave(&port->lock, flags);
 		if (port->write_urb_busy) {
-			spin_unlock_bh(&port->lock);
+			spin_unlock_irqrestore(&port->lock, flags);
 			dbg("%s - already writing", __FUNCTION__);
 			return 0;
 		}
 		port->write_urb_busy = 1;
-		spin_unlock_bh(&port->lock);
+		spin_unlock_irqrestore(&port->lock, flags);
 
 		count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 8503e73..cbe71a5 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -17,6 +17,8 @@
  *  more details.
  */
 
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -535,33 +537,35 @@ static int __devinit platinumfb_probe(struct of_device* odev,
 	volatile __u8		*fbuffer;
 	int			bank0, bank1, bank2, bank3, rc;
 
-	printk(KERN_INFO "platinumfb: Found Apple Platinum video hardware\n");
+	dev_info(&odev->dev, "Found Apple Platinum video hardware\n");
 
 	info = framebuffer_alloc(sizeof(*pinfo), &odev->dev);
-	if (info == NULL)
+	if (info == NULL) {
+		dev_err(&odev->dev, "Failed to allocate fbdev !\n");
 		return -ENOMEM;
+	}
 	pinfo = info->par;
 
 	if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) ||
 	    of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) {
-		printk(KERN_ERR "platinumfb: Can't get resources\n");
-		framebuffer_release(info);
-		return -ENXIO;
-	}
-	if (!request_mem_region(pinfo->rsrc_reg.start,
-				pinfo->rsrc_reg.start -
-				pinfo->rsrc_reg.end + 1,
-				"platinumfb registers")) {
+		dev_err(&odev->dev, "Can't get resources\n");
 		framebuffer_release(info);
 		return -ENXIO;
 	}
+	dev_dbg(&odev->dev, " registers  : 0x%llx...0x%llx\n",
+		(unsigned long long)pinfo->rsrc_reg.start,
+		(unsigned long long)pinfo->rsrc_reg.end);
+	dev_dbg(&odev->dev, " framebuffer: 0x%llx...0x%llx\n",
+		(unsigned long long)pinfo->rsrc_fb.start,
+		(unsigned long long)pinfo->rsrc_fb.end);
+
+	/* Do not try to request register space, they overlap with the
+	 * northbridge and that can fail. Only request framebuffer
+	 */
 	if (!request_mem_region(pinfo->rsrc_fb.start,
-				pinfo->rsrc_fb.start
-				- pinfo->rsrc_fb.end + 1,
+				pinfo->rsrc_fb.end - pinfo->rsrc_fb.start + 1,
 				"platinumfb framebuffer")) {
-		release_mem_region(pinfo->rsrc_reg.start,
-				   pinfo->rsrc_reg.end -
-				   pinfo->rsrc_reg.start + 1);
+		printk(KERN_ERR "platinumfb: Can't request framebuffer !\n");
 		framebuffer_release(info);
 		return -ENXIO;
 	}
@@ -600,7 +604,8 @@ static int __devinit platinumfb_probe(struct of_device* odev,
 	bank2 = fbuffer[0x200000] == 0x56;
 	bank3 = fbuffer[0x300000] == 0x78;
 	pinfo->total_vram = (bank0 + bank1 + bank2 + bank3) * 0x100000;
-	printk(KERN_INFO "platinumfb: Total VRAM = %dMB (%d%d%d%d)\n", (int) (pinfo->total_vram / 1024 / 1024),
+	printk(KERN_INFO "platinumfb: Total VRAM = %dMB (%d%d%d%d)\n",
+	       (unsigned int) (pinfo->total_vram / 1024 / 1024),
 	       bank3, bank2, bank1, bank0);
 
 	/*
@@ -644,16 +649,15 @@ static int __devexit platinumfb_remove(struct of_device* odev)
         unregister_framebuffer (info);
 	
 	/* Unmap frame buffer and registers */
+	iounmap(pinfo->frame_buffer);
+	iounmap(pinfo->platinum_regs);
+	iounmap(pinfo->cmap_regs);
+
 	release_mem_region(pinfo->rsrc_fb.start,
 			   pinfo->rsrc_fb.end -
 			   pinfo->rsrc_fb.start + 1);
-	release_mem_region(pinfo->rsrc_reg.start,
-			   pinfo->rsrc_reg.end -
-			   pinfo->rsrc_reg.start + 1);
-	iounmap(pinfo->frame_buffer);
-	iounmap(pinfo->platinum_regs);
+
 	release_mem_region(pinfo->cmap_regs_phys, 0x1000);
-	iounmap(pinfo->cmap_regs);
 
 	framebuffer_release(info);
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b9f66c1..20528c0 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1437,4 +1437,11 @@ static inline int hwif_to_node(ide_hwif_t *hwif)
 	return dev ? pcibus_to_node(dev->bus) : -1;
 }
 
+static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+
+	return &hwif->drives[(drive->dn ^ 1) & 1];
+}
+
 #endif /* _IDE_H */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a67bb90..9ccca8f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -177,6 +177,8 @@ enum {
 	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
 	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
 	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
+	ATA_FLAG_NO_SRST	= (1 << 18),
+	ATA_FLAG_ASSUME_ATA	= (1 << 19),
 
 	/* The following flag belongs to ap->pflags but is kept in
 	 * ap->flags because it's referenced in many LLDs and will be
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 8da374c..2692ec9 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -4,11 +4,8 @@
  * belong here.
  */
 
-/* device must not be autosuspended */
-#define USB_QUIRK_NO_AUTOSUSPEND	0x00000001
-
 /* string descriptors must not be fetched using a 255-byte read */
-#define USB_QUIRK_STRING_FETCH_255	0x00000002
+#define USB_QUIRK_STRING_FETCH_255	0x00000001
 
 /* device can't resume correctly so reset it instead */
-#define USB_QUIRK_RESET_RESUME		0x00000004
+#define USB_QUIRK_RESET_RESUME		0x00000002
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 5a01c76..05f5cdc 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -14,7 +14,8 @@ endif
 snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
 		pcm_memory.o
 
-snd-page-alloc-objs := memalloc.o sgbuf.o
+snd-page-alloc-y := memalloc.o
+snd-page-alloc-$(CONFIG_HAS_DMA) += sgbuf.o
 
 snd-rawmidi-objs  := rawmidi.o
 snd-timer-objs    := timer.o
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index 9b5656d..6f99b6f 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -206,6 +206,7 @@ void snd_free_pages(void *ptr, size_t size)
  *
  */
 
+#ifdef CONFIG_HAS_DMA
 /* allocate the coherent DMA pages */
 static void *snd_malloc_dev_pages(struct device *dev, size_t size, dma_addr_t *dma)
 {
@@ -239,6 +240,7 @@ static void snd_free_dev_pages(struct device *dev, size_t size, void *ptr,
 	dec_snd_pages(pg);
 	dma_free_coherent(dev, PAGE_SIZE << pg, ptr, dma);
 }
+#endif /* CONFIG_HAS_DMA */
 
 #ifdef CONFIG_SBUS
 
@@ -312,12 +314,14 @@ int snd_dma_alloc_pages(int type, struct device *device, size_t size,
 		dmab->area = snd_malloc_sbus_pages(device, size, &dmab->addr);
 		break;
 #endif
+#ifdef CONFIG_HAS_DMA
 	case SNDRV_DMA_TYPE_DEV:
 		dmab->area = snd_malloc_dev_pages(device, size, &dmab->addr);
 		break;
 	case SNDRV_DMA_TYPE_DEV_SG:
 		snd_malloc_sgbuf_pages(device, size, dmab, NULL);
 		break;
+#endif
 	default:
 		printk(KERN_ERR "snd-malloc: invalid device type %d\n", type);
 		dmab->area = NULL;
@@ -383,12 +387,14 @@ void snd_dma_free_pages(struct snd_dma_buffer *dmab)
 		snd_free_sbus_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr);
 		break;
 #endif
+#ifdef CONFIG_HAS_DMA
 	case SNDRV_DMA_TYPE_DEV:
 		snd_free_dev_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr);
 		break;
 	case SNDRV_DMA_TYPE_DEV_SG:
 		snd_free_sgbuf_pages(dmab);
 		break;
+#endif
 	default:
 		printk(KERN_ERR "snd-malloc: invalid device type %d\n", dmab->dev.type);
 	}
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index 7b2c1dc..5bff700 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -871,7 +871,7 @@ static struct snd_kcontrol_new snd_emu10k1_spdif_mask_control =
 	.access =	SNDRV_CTL_ELEM_ACCESS_READ,
 	.iface =        SNDRV_CTL_ELEM_IFACE_PCM,
 	.name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK),
-	.count =	4,
+	.count =	3,
 	.info =         snd_emu10k1_spdif_info,
 	.get =          snd_emu10k1_spdif_get_mask
 };
@@ -880,7 +880,7 @@ static struct snd_kcontrol_new snd_emu10k1_spdif_control =
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
 	.name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
-	.count =	4,
+	.count =	3,
 	.info =         snd_emu10k1_spdif_info,
 	.get =          snd_emu10k1_spdif_get,
 	.put =          snd_emu10k1_spdif_put
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 3f25de7..d46e7e4 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -162,8 +162,9 @@ static hda_nid_t stac925x_dac_nids[1] = {
         0x02,
 };
 
-static hda_nid_t stac925x_dmic_nids[1] = {
-	0x15, 
+#define STAC925X_NUM_DMICS	1
+static hda_nid_t stac925x_dmic_nids[STAC925X_NUM_DMICS + 1] = {
+	0x15, 0
 };
 
 static hda_nid_t stac922x_adc_nids[2] = {
@@ -190,8 +191,9 @@ static hda_nid_t stac9205_mux_nids[2] = {
         0x19, 0x1a
 };
 
-static hda_nid_t stac9205_dmic_nids[2] = {
-        0x17, 0x18,
+#define STAC9205_NUM_DMICS	2
+static hda_nid_t stac9205_dmic_nids[STAC9205_NUM_DMICS + 1] = {
+        0x17, 0x18, 0
 };
 
 static hda_nid_t stac9200_pin_nids[8] = {
@@ -1182,7 +1184,8 @@ static int stac92xx_add_dyn_out_pins(struct hda_codec *codec, struct auto_pin_cf
 	case 3:
 		/* add line-in as side */
 		if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 3) {
-			cfg->line_out_pins[3] = cfg->input_pins[AUTO_PIN_LINE];
+			cfg->line_out_pins[cfg->line_outs] =
+				cfg->input_pins[AUTO_PIN_LINE];
 			spec->line_switch = 1;
 			cfg->line_outs++;
 		}
@@ -1190,12 +1193,14 @@ static int stac92xx_add_dyn_out_pins(struct hda_codec *codec, struct auto_pin_cf
 	case 2:
 		/* add line-in as clfe and mic as side */
 		if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 2) {
-			cfg->line_out_pins[2] = cfg->input_pins[AUTO_PIN_LINE];
+			cfg->line_out_pins[cfg->line_outs] =
+				cfg->input_pins[AUTO_PIN_LINE];
 			spec->line_switch = 1;
 			cfg->line_outs++;
 		}
 		if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 3) {
-			cfg->line_out_pins[3] = cfg->input_pins[AUTO_PIN_MIC];
+			cfg->line_out_pins[cfg->line_outs] =
+				cfg->input_pins[AUTO_PIN_MIC];
 			spec->mic_switch = 1;
 			cfg->line_outs++;
 		}
@@ -1203,12 +1208,14 @@ static int stac92xx_add_dyn_out_pins(struct hda_codec *codec, struct auto_pin_cf
 	case 1:
 		/* add line-in as surr and mic as clfe */
 		if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 1) {
-			cfg->line_out_pins[1] = cfg->input_pins[AUTO_PIN_LINE];
+			cfg->line_out_pins[cfg->line_outs] =
+				cfg->input_pins[AUTO_PIN_LINE];
 			spec->line_switch = 1;
 			cfg->line_outs++;
 		}
 		if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 2) {
-			cfg->line_out_pins[2] = cfg->input_pins[AUTO_PIN_MIC];
+			cfg->line_out_pins[cfg->line_outs] =
+				cfg->input_pins[AUTO_PIN_MIC];
 			spec->mic_switch = 1;
 			cfg->line_outs++;
 		}
@@ -2058,7 +2065,7 @@ static int patch_stac925x(struct hda_codec *codec)
 	case 0x83847633: /* STAC9202D */
 	case 0x83847636: /* STAC9251  */
 	case 0x83847637: /* STAC9251D */
-		spec->num_dmics = 1;
+		spec->num_dmics = STAC925X_NUM_DMICS;
 		spec->dmic_nids = stac925x_dmic_nids;
 		break;
 	default:
@@ -2302,7 +2309,7 @@ static int patch_stac9205(struct hda_codec *codec)
 	spec->mux_nids = stac9205_mux_nids;
 	spec->num_muxes = ARRAY_SIZE(stac9205_mux_nids);
 	spec->dmic_nids = stac9205_dmic_nids;
-	spec->num_dmics = ARRAY_SIZE(stac9205_dmic_nids);
+	spec->num_dmics = STAC9205_NUM_DMICS;
 	spec->dmux_nid = 0x1d;
 
 	spec->init = stac9205_core_init;
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 3b3ef65..75dcb9a 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3108,6 +3108,9 @@ static int hdsp_dds_offset(struct hdsp *hdsp)
 	unsigned int dds_value = hdsp->dds_value;
 	int system_sample_rate = hdsp->system_sample_rate;
 
+	if (!dds_value)
+		return 0;
+
 	n = DDS_NUMERATOR;
 	/*
 	 * dds_value = n / rate
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 325d4b6..19776e7 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -1483,7 +1483,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, unsi
 	struct snd_kcontrol *kctl;
 	char **namelist;
 
-	if (! num_ins || desc[0] < 6 + num_ins) {
+	if (! num_ins || desc[0] < 5 + num_ins) {
 		snd_printk(KERN_ERR "invalid SELECTOR UNIT descriptor %d\n", unitid);
 		return -EINVAL;
 	}

  reply	other threads:[~2007-11-16 18:50 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-16 18:37 Linux 2.6.23.8 Greg Kroah-Hartman
2007-11-16 18:38 ` Greg Kroah-Hartman
2007-11-16 18:39 ` Linux 2.6.23.2 Greg Kroah-Hartman
2007-11-16 18:39   ` Greg Kroah-Hartman
2007-11-16 19:35   ` Mark Lord
2007-11-16 19:39     ` Matti Aarnio
2007-11-16 19:57       ` Matt Mackall
2007-11-16 23:35         ` David Woodhouse
2007-11-18  1:38         ` Krzysztof Halasa
2007-11-16 20:10       ` Greg KH
2007-11-16 18:44 ` Linux 2.6.23.3 Greg Kroah-Hartman
2007-11-16 18:44   ` Greg Kroah-Hartman
2007-11-16 23:15   ` Michael Tokarev
2007-11-17  1:03     ` Greg KH
2007-11-16 18:46 ` Linux 2.6.23.4 Greg Kroah-Hartman
2007-11-16 18:46   ` Greg Kroah-Hartman
2007-11-16 18:47 ` Linux 2.6.23.5 Greg Kroah-Hartman
2007-11-16 18:47   ` Greg Kroah-Hartman
2007-11-16 18:48 ` Linux 2.6.23.6 Greg Kroah-Hartman
2007-11-16 18:49   ` Greg Kroah-Hartman [this message]
2007-11-16 18:50 ` Linux 2.6.23.7 Greg Kroah-Hartman
2007-11-16 18:50   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071116184903.GL9807@kroah.com \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.