All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Frederik Himpe <fhimpe@telenet.be>
Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: Re: 2.6.24-rc3-git3: usb hardware interrupts using 25% of CPU time
Date: Thu, 29 Nov 2007 00:02:01 +0100	[thread overview]
Message-ID: <200711290002.01850.rjw@sisk.pl> (raw)
In-Reply-To: <pan.2007.11.28.22.33.18@telenet.be>

On Wednesday, 28 of November 2007, Frederik Himpe wrote:
> I installed Linux 2.6.24-rc3-git3 on a PPC based Apple Powerbook G4 
> system. Now with top I see that over 20% of CPU time is used by hardware 
> interrupts. Looking at /proc/interrupts, the number in the row 
> ohci_hcd:usb1 is rising very quickly:

What's the last kernel that worked correctly?


> $ cat /proc/interrupts 
>            CPU0       
>  21:          1   MPIC 1    Edge      i2sbus: i2s-a (tx)
>  24:      11008   MPIC 1    Level     ide1
>  25:      33608   MPIC 1    Level     VIA-PMU
>  26:         56   MPIC 1    Level     keywest i2c
>  27:          1   MPIC 1    Edge      i2sbus: i2s-a (rx)
>  29:     281578   MPIC 1    Level     ohci_hcd:usb1
>  30:          0   MPIC 1    Level     i2sbus: i2s-a (control)
>  31:          0   MPIC 1    Level     i2sbus: i2s-b (control)
>  33:          1   MPIC 1    Edge      i2sbus: i2s-b (tx)
>  34:          1   MPIC 1    Edge      i2sbus: i2s-b (rx)
>  39:      41611   MPIC 1    Level     ide0
>  40:          2   MPIC 1    Level     ohci1394
>  41:          0   MPIC 1    Level     eth0
>  42:          0   MPIC 1    Level     keywest i2c
>  47:       2826   MPIC 1    Level     GPIO1 ADB
>  48:      58633   MPIC 1    Level     radeon@pci:0000:00:10.0
>  52:      18961   MPIC 1    Level     b43
>  53:          1   MPIC 1    Level     yenta
>  61:          1   MPIC 1    Edge      headphone-detect
>  63:          0   MPIC 1    Level     ohci_hcd:usb2, ohci_hcd:usb3, 
> ehci_hcd:usb4
> BAD:     187917
> 
> $ lspci -nn
> 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP 
> [106b:0034]
> 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 
> [Mobility Radeon 9600 M10] [1002:4e50]
> 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI 
> [106b:0035]
> 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 
> 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
> 0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card 
> Cardbus Controller [104c:ac56]
> 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid 
> Mac I/O [106b:003e]
> 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid 
> USB [106b:003f]
> 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid 
> USB [106b:003f]
> 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 
> 43)
> 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 
> 43)
> 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] 
> (rev 04)
> 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal 
> PCI [106b:0036]
> 0002:24:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid 
> ATA/100 [106b:003b]
> 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 
> FireWire [106b:0031] (rev 81)
> 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 
> GMAC (Sun GEM) [106b:0032] (rev 80)
> 
> 
> Full dmesg, .config and lsmod output can be found on 
> http://artipc10.vub.ac.be/linux-2.6.24-rc3-git3/

  parent reply	other threads:[~2007-11-28 22:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-28 22:33 2.6.24-rc3-git3: usb hardware interrupts using 25% of CPU time Frederik Himpe
2007-11-28 22:40 ` Tony Breeds
2007-11-28 23:02 ` Rafael J. Wysocki [this message]
2007-11-28 22:50   ` Frederik Himpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200711290002.01850.rjw@sisk.pl \
    --to=rjw@sisk.pl \
    --cc=fhimpe@telenet.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.