From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Thu, 29 Nov 2007 08:51:56 +0000 Subject: Re: [lm-sensors] Winbond W83L786G support Message-Id: <20071129095156.1422a16a@hyperion.delvare> List-Id: References: <20071128160454.24906.qmail@webmail35.rediffmail.com> In-Reply-To: <20071128160454.24906.qmail@webmail35.rediffmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Sagar, On 28 Nov 2007 16:04:54 -0000, Sagar Borikar wrote: > I am using Winbond W83L786NG chip in my box and I wanted to test > it using lm-sensors. I could find the driver patch for this chipe > supported in 2.6.23-rc4 onwards. But couldn't find the corresponding > code in lm-sensors. Even lm-sensors-3.0.0 is not having chip > specific code.Can anyone tell me how this monitor can be tested? Please read this thread: http://lists.lm-sensors.org/pipermail/lm-sensors/2007-November/022032.html lm-sensors 3.0.0 doesn't need have any chip-specific code, so it's no surprise that you didn't find any W83L786NG-specific code there. It's per design, now that the sysfs interface is fully standardized. So please give a try to lm-sensors 3.0.0, it should work. If it doesn't, please report. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors