From: David Brownell <david-b@pacbell.net>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>,
Patrice VILCHEZ <patrice.vilchez@atmel.com>,
ARM Linux Mailing List <linux-arm-kernel@lists.arm.linux.org.uk>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb: at91_udc: correct hanging while disconnecting usb cable
Date: Thu, 6 Dec 2007 08:02:52 -0800 [thread overview]
Message-ID: <200712060802.53229.david-b@pacbell.net> (raw)
In-Reply-To: <4757D7F3.8040904@atmel.com>
On Thursday 06 December 2007, Nicolas Ferre wrote:
> Correct hanging while disconnecting the USB device
> cable. Prevent a race between vbus and UDP interrupts.
> This bug was tracked on at91sam9260ek boards.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
> ---
>
> A usb resume interrupt was firing after the vbus
> interrupt : the IP was then already stoped and not able
> to deal with it (no more clock). A simple interrupt disabling
> is ok as the "end of bus reset" irq is non maskable and ok
> to resume the USB device IP.
Good, thanks for finding this. The bug was reported
recently, and obviously can't be reproduced except on
boards which *have* a VBUS interrupt!
I've signed off on this and suggested Greg merge it
before the 2.6.24-final freeze.
- Dave
prev parent reply other threads:[~2007-12-06 17:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-06 11:07 [PATCH] usb: at91_udc: correct hanging while disconnecting usb cable Nicolas Ferre
2007-12-06 16:02 ` David Brownell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200712060802.53229.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.