From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 14 Dec 2007 08:56:02 -0800 From: Stephen Hemminger Subject: Re: [Bridge] Packet per Second Message-ID: <20071214085602.11a09070@deepthought> In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit List-Id: Linux Ethernet Bridging List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: =?UTF-8?B?RmzDoXZpbw==?= Pires Cc: netdev@vger.kernel.org, bridge@linux-foundation.org On Fri, 14 Dec 2007 15:34:10 +0000 (UTC) Flávio Pires wrote: > Hi all, > > It's my first time using usenet... > > Well, I work on an ISP and we have a linux box acting as a > bridge+firewall. With this bridge+firewall we control the packet rate > per second from each client and from our repeaters. But I can`t > measure the packet rate per IP. Is there any tool for this? > > Actually, what I want is to measure the packet rate per IP and > generate graphics with mrtg or rrdtool, but for this I must have the > number of packets per second of each client :) > > Thank you all > -- > Flávio > > Not that I know of, but you might look at: http://www.bandwidtharbitrator.com/ -- Stephen Hemminger From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: Re: [Bridge] Packet per Second Date: Fri, 14 Dec 2007 08:56:02 -0800 Message-ID: <20071214085602.11a09070@deepthought> References: Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: bridge@linux-foundation.org, netdev@vger.kernel.org To: =?UTF-8?B?RmzDoXZpbw==?= Pires Return-path: Received: from smtp2.linux-foundation.org ([207.189.120.14]:49642 "EHLO smtp2.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752131AbXLNQ5b convert rfc822-to-8bit (ORCPT ); Fri, 14 Dec 2007 11:57:31 -0500 In-Reply-To: Sender: netdev-owner@vger.kernel.org List-ID: On Fri, 14 Dec 2007 15:34:10 +0000 (UTC) =46l=C3=A1vio Pires wrote: > Hi all,=20 >=20 > It's my first time using usenet... >=20 > Well, I work on an ISP and we have a linux box acting as a > bridge+firewall. With this bridge+firewall we control the packet rate > per second from each client and from our repeaters. But I can`t > measure the packet rate per IP. Is there any tool for this? >=20 > Actually, what I want is to measure the packet rate per IP and > generate graphics with mrtg or rrdtool, but for this I must have the > number of packets per second of each client :) >=20 > Thank you all > -- > Fl=C3=A1vio >=20 >=20 Not that I know of, but you might look at: http://www.bandwidtharbitrator.com/ --=20 Stephen Hemminger